{"title":"Generic 2-Stroke 125HP Outboard Marine Engine Parts","description":"\u003csection id=\"hero\" style=\"padding:16px; border:1px solid #e5e7eb; border-radius:8px;\"\u003e\n  \u003cp\u003eThis page is for Mercury 2‑Stroke 125HP outboard engines. Use it to find compatible parts and service information, including maintenance tips, common replacement parts, and troubleshooting guidance. You can also browse the main Mercury collection. Scroll to the bottom of the page to start browsing parts for this engine, and on the collection page use the Filter \u0026amp; Sort controls to narrow results by horsepower, year range, and part category\/section.\u003c\/p\u003e\n  \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\" style=\"display:inline-block; padding:10px 14px; background:#0d6efd; color:#fff; text-decoration:none; border-radius:6px;\"\u003eBrowse All Mercury Parts\u003c\/a\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"identify-model\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eHow to Identify Your 125HP Model\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eLocate the serial\/nameplate on the swivel bracket or transom clamp; record the full serial number and any model code.\u003c\/li\u003e\n    \u003cli\u003eRead the model suffix for shaft length (20\"\/25\") and control type (tiller\/remote). These details affect driveshafts, shift shafts, and linkages.\u003c\/li\u003e\n    \u003cli\u003eConfirm platform details: most 125HP two‑strokes are inline‑4 carbureted units; later variants may have oil injection. Verify whether your engine is premix or oil‑injected.\u003c\/li\u003e\n    \u003cli\u003eNote the gear ratio if known; some gearcase parts vary by ratio and jaw style. Always match by serial number before ordering.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"platforms\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003ePlatform Overview\u003c\/h2\u003e\n  \u003ch3\u003eInline‑4 2‑Stroke (approx. 100–125HP)\u003c\/h3\u003e\n  \u003ctable style=\"width:100%; border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eFeature\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eDescription\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eConfiguration\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInline‑4 carbureted 2‑Stroke with a larger gearcase and heavier midsection; many units feature oil injection.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eCommon Models\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eMercury 100–125HP inline‑4 two‑stroke models (various years\/regions).\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eAdvantages\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eBroad torque band and strong top‑end for heavier hulls; straightforward carburetor service.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px;\"\u003eNotes\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eSome gearcase components overlap other families, but prop shafts, gears, and clutch dogs can differ by ratio\/jaw style and serial break. Verify with serial number, shaft length, and gear ratio.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"service-kits\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eRoutine Maintenance \u0026amp; Service Parts\u003c\/h2\u003e\n  \u003cp\u003eIntervals below are general guidelines for Mercury two‑stroke outboards. Always follow your official service manual and local operating conditions.\u003c\/p\u003e\n  \u003ctable style=\"width:100%; border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eItem\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eInterval*\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eRemarks\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eParts Link\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eGear oil (lower unit)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eEvery 100 hours or annually\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect for water intrusion or metal on the drain plug magnet; reseal if contaminated.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\"\u003eMercury Outboard Parts\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eSpark plugs\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect every 50 hours; replace ~100 hours\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eGap to spec; replace sooner for fouling, hard starts, or misfire.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/spark-plug\"\u003eSpark plug\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eFuel filter \/ in‑line filter\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eEvery 100 hours or annually\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eReplace more often with ethanol blends, dirty tanks, or restricted flow.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/fuel-filters-1\"\u003eFuel Filters\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eWater pump impeller \/ kit\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eEvery 1–2 seasons (or sooner if run dry\/sandy)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eCritical for cooling; inspect housing \u0026amp; wear plate; replace if scored or warped.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-water-pump-repair-kits\"\u003eMercury Water Pump Repair Kits\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eAnodes (external\/internal)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect quarterly; replace at ~50% loss\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eChoose zinc\/aluminum\/magnesium based on water type (salt\/brackish\/fresh).\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/anodes\"\u003eAnodes\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eOil injection system check (if equipped) \/ premix ratio\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect annually\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eVerify pump output, lines, and alarms; if premix, follow manual‑specified ratio.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\"\u003eMercury Outboard Parts\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px;\"\u003eLower unit seal kit (if leaking)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eAs needed\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eUse if water or metal is found in gear oil; pressure\/vacuum test after reseal.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-lower-unit-seal-kits\"\u003eMercury Lower Unit Seal Kits\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"common-parts\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eFrequently Used Parts Categories\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eRoutine Service: \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\"\u003eMercury Outboard Parts\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eCooling System: \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-water-pump-repair-kits\"\u003eMercury Water Pump Repair Kits\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eFuel System: \u003ca href=\"https:\/\/seasierra.com\/collections\/fuel-filters-1\"\u003eFuel Filters\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eIgnition \/ Electrical: \u003ca href=\"https:\/\/seasierra.com\/collections\/electrical-items\"\u003eElectrical Items\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eCorrosion Protection: \u003ca href=\"https:\/\/seasierra.com\/collections\/anodes\"\u003eAnodes\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eGearcase Sealing: \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-lower-unit-seal-kits\"\u003eMercury Lower Unit Seal Kits\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003ePropulsion: \u003ca href=\"https:\/\/seasierra.com\/collections\/propellers\"\u003ePropellers\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"troubleshooting\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eCommon Symptoms \u0026amp; Quick Checks\u003c\/h2\u003e\n  \u003ctable style=\"width:100%; border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eSymptom\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eCheck First\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #ddd; padding:8px;\"\u003eRelated Parts\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eWeak tell‑tale or overheat alarm\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect intake screens, tell‑tale hose, and impeller condition; verify thermostat function.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eWater pump kit, thermostat, intake screen.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003ePoor acceleration \/ power loss\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eCheck prop for damage, plug condition, fuel restriction, and carb sync\/cleanliness.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003ePropeller, spark plugs, fuel filter, carburetor service parts.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eHard starting \/ rough idle\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eVerify choke\/enrichment, primer bulb and lines, fresh fuel, and compression.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eSpark plugs, fuel filter, fuel\/oil hoses, carburetor kit.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eExcessive smoke (2‑Stroke)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eConfirm premix ratio or oil‑injection calibration; check for stuck choke or flooded carbs.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eSpark plugs, fuel\/oil lines, carburetor parts.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px;\"\u003eGearcase noise \/ metal in oil\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eDrain and inspect gear oil; check for water intrusion and prop shaft seal damage.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eGear oil, bearings, seals, lower unit seal kit, shims.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"faq\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eFAQs\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre parts interchangeable between different years or platforms?\u003c\/summary\u003e\n    \u003cp\u003eSome components interchange across inline‑4 families, but many items change at serial breaks (e.g., gear ratios, ignition, seal dimensions). Always match by serial number, shaft length, and gear ratio before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhen should the water pump impeller be replaced?\u003c\/summary\u003e\n    \u003cp\u003eInspect annually and replace every 1–2 seasons, or immediately after any overheat, sand ingestion, or dry‑running event. Engines used in silty or warm water benefit from yearly replacement.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow often should gear oil be changed?\u003c\/summary\u003e\n    \u003cp\u003eChange the lower unit gear oil every 100 hours or once per year. If water or metal is present, service the gearcase and replace seals before returning to service.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat information helps confirm part compatibility?\u003c\/summary\u003e\n    \u003cp\u003eProvide the engine’s serial number, horsepower, shaft length (20\"\/25\"), control type (tiller\/remote), and any known gear ratio. Photos of the nameplate and the part needing replacement are very helpful.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"cta\" style=\"margin-top:24px; padding:16px; border:1px solid #e5e7eb; border-radius:8px;\"\u003e\n  \u003cp\u003eReady to find parts for your Mercury two‑stroke 125HP? Browse the main Mercury collection and filter by horsepower, year, and model to narrow your results.\u003c\/p\u003e\n  \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\" style=\"display:inline-block; padding:10px 14px; background:#0d6efd; color:#fff; text-decoration:none; border-radius:6px;\"\u003eShop Mercury Outboard Parts\u003c\/a\u003e\n  \u003cp style=\"margin-top:8px; color:#555;\"\u003eIf you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.\u003c\/p\u003e\n\u003c\/section\u003e","products":[{"product_id":"whale-tail-hydrofoil-stabilizer-fits-outboard-motors-stern-drives-40-300-hp-replaces-fo2003","title":"Whale Tail Hydrofoil Stabilizer for 40–300 HP Outboard Motors and Stern Drives","description":"\u003csection\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis marine-grade reinforced PA66 nylon \u003cstrong\u003eWhale Tail Hydrofoil Stabilizer\u003c\/strong\u003e is designed for many 40–300 HP outboard motors and stern drives. By adding hydrodynamic lift at the stern, it can help improve low-speed handling, reduce porpoising, shorten time to plane, and help the boat remain on plane at lower speeds.\u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket hydrofoil stabilizer referenced in some listings as a replacement for FO2003 and as a Whale Tail-style hydrofoil. Confirm the dimensions, mounting area, engine or drive configuration, and listed exceptions before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill-and-bolt installation on the anti-cavitation plate; mounting hardware and a drill bit are included.\u003c\/li\u003e\n  \u003cli\u003eMade from reinforced, marine-grade PA66 nylon for strength, impact resistance, and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eThe curved hydrofoil profile is intended to improve stern lift while helping manage drag and propeller-area turbulence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number References\u003c\/h2\u003e\n\u003cp\u003eThe references below are aftermarket or listing references and should not be treated as proof of fitment by themselves. Always compare the product dimensions and application requirements with your equipment.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number References\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eReference\u003c\/th\u003e\n        \u003cth\u003eNumber or Description\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eAftermarket reference\u003c\/td\u003e\n        \u003ctd\u003eFO2003\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eProduct style\u003c\/td\u003e\n        \u003ctd\u003eWhale Tail Hydrofoil Stabilizer\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine and Drive Compatibility\u003c\/h2\u003e\n\u003cp\u003eApplication depends on the shape and available mounting area of the anti-cavitation plate or drive. The following information describes the intended application range and important exclusions noted for this style of hydrofoil; it does not replace a dimensional fit check.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine and Drive Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand or Application\u003c\/th\u003e\n        \u003cth\u003eCompatibility\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eGeneral application\u003c\/td\u003e\n        \u003ctd\u003eMany 40–300 HP outboard motors and stern drives\u003c\/td\u003e\n        \u003ctd\u003eConfirm clearance, mounting surface, dimensions, and hardware requirements before installation.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eVolvo Penta\u003c\/td\u003e\n        \u003ctd\u003eSX-A, DPS, DPR, DPH, and 280\/290 series applications may be suitable\u003c\/td\u003e\n        \u003ctd\u003eSome installations may require longer bolts and 1-inch fender washers. Not recommended for Volvo Ocean Series XDP applications.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003eMany 40–300 HP applications\u003c\/td\u003e\n        \u003ctd\u003eNot recommended for Mercury 4-Stroke 40, 50, or 60 HP models and not for Mercury Bravo II.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eHonda\u003c\/td\u003e\n        \u003ctd\u003eMany 40–200 HP applications\u003c\/td\u003e\n        \u003ctd\u003eNot recommended for applications above 200 HP.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eYamaha\u003c\/td\u003e\n        \u003ctd\u003eMany 40–300 HP applications\u003c\/td\u003e\n        \u003ctd\u003eNot recommended for 350 HP applications.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n  \u003cdd\u003eHydrofoil stabilizer\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n  \u003cdd\u003eFour-bolt installation; drilling required\u003c\/dd\u003e\n  \u003cdt\u003eMounting Location\u003c\/dt\u003e\n  \u003cdd\u003eAnti-cavitation plate or compatible stern-drive mounting surface\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n  \u003cdd\u003eReinforced PA66 nylon, marine-grade plastic\u003c\/dd\u003e\n  \u003cdt\u003eColor\u003c\/dt\u003e\n  \u003cdd\u003eBlue, silver, or red depending on the selected model or available version\u003c\/dd\u003e\n  \u003cdt\u003eDimensions\u003c\/dt\u003e\n  \u003cdd\u003eApproximately 17 × 14.4 inches (432 × 366 mm)\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n  \u003cdd\u003eApproximately 1.72 kg (3.79 lb)\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n  \u003cdd\u003eDrill and bolt\u003c\/dd\u003e\n  \u003cdt\u003eHydrofoil Profile\u003c\/dt\u003e\n  \u003cdd\u003eCurved profile designed to provide stern lift and help reduce porpoising\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Hydrofoil stabilizer\u003c\/li\u003e\n  \u003cli\u003e4 × Sets of stainless-steel screws, washers, and nuts\u003c\/li\u003e\n  \u003cli\u003e1 × 6.5 mm drill bit\u003c\/li\u003e\n  \u003cli\u003e1 × Installation instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eFor safety, disconnect the engine battery before beginning installation.\u003c\/li\u003e\n  \u003cli\u003eCenter the hydrofoil on the anti-cavitation plate or compatible drive mounting surface. Position it as far back as practical without interfering with propeller movement or steering components.\u003c\/li\u003e\n  \u003cli\u003eUse the hydrofoil mounting holes as a template and mark the four drilling points.\u003c\/li\u003e\n  \u003cli\u003eRemove the hydrofoil and carefully drill the marked holes with the included 6.5 mm drill bit, provided the plate thickness and material are suitable for drilling.\u003c\/li\u003e\n  \u003cli\u003ePlace the hydrofoil on the plate and align it with the drilled holes.\u003c\/li\u003e\n  \u003cli\u003eInsert the stainless-steel bolts from the top and secure them underneath with the washers and nuts.\u003c\/li\u003e\n  \u003cli\u003eTighten the fasteners evenly and securely. Do not overtighten, as this may damage the plate or the hydrofoil.\u003c\/li\u003e\n  \u003cli\u003eReconnect the battery and test the boat at low speed in a safe, open-water area. Check the installation again after the initial test run.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting and FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill this hydrofoil fit my specific engine or drive?\u003c\/summary\u003e\n  \u003cp\u003eThis stabilizer is intended for many 40–300 HP outboard motors and stern drives, but fitment depends on the plate or drive geometry, available mounting area, clearance, and the exclusions listed above. Compare the dimensions and installation requirements with your equipment before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDo I have to drill holes in the anti-cavitation plate?\u003c\/summary\u003e\n  \u003cp\u003eYes. This model uses a four-bolt installation and requires four holes to be drilled in a suitable mounting surface. If you are not certain that the plate can be drilled safely, consult a qualified marine technician.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow can a hydrofoil improve performance?\u003c\/summary\u003e\n  \u003cp\u003eThe hydrofoil adds hydrodynamic lift to the stern. Depending on the boat and setup, this may help the boat reach plane sooner, stay on plane at lower speeds, improve low-speed handling, and reduce bow bouncing or porpoising.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill this reduce my boat's top speed?\u003c\/summary\u003e\n  \u003cp\u003eResults vary by boat, engine, propeller, loading, and installation. A hydrofoil may change handling and speed characteristics, and some setups may experience a small reduction in top speed because of added drag. Test the boat carefully after installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat is the benefit of reinforced PA66 nylon?\u003c\/summary\u003e\n  \u003cp\u003eReinforced PA66 nylon combines stiffness, impact resistance, and corrosion resistance. It is intended to provide a durable alternative to ordinary unreinforced plastic in a marine environment.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\n  \u003cp\u003eNo. This listing is for an aftermarket hydrofoil stabilizer. The FO2003 reference is provided as an aftermarket reference only and does not, by itself, establish OEM manufacture or universal interchangeability.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow should I confirm fitment before ordering?\u003c\/summary\u003e\n  \u003cp\u003eCheck the available mounting area, overall dimensions, anti-cavitation plate or drive shape, propeller and steering clearance, engine horsepower, and the model-specific exclusions. If any measurement or application detail differs, do not proceed without professional confirmation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety and Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the dimensions, mounting surface, clearances, and application notes against your equipment before purchase.\u003c\/li\u003e\n  \u003cli\u003eThis product requires drilling and bolting; professional marine installation is recommended when you are not experienced with structural or engine-related work.\u003c\/li\u003e\n  \u003cli\u003eInspect all fasteners and the hydrofoil after the first test run and periodically during use.\u003c\/li\u003e\n  \u003cli\u003eDo not operate the boat if the hydrofoil is loose, cracked, damaged, or interfering with the propeller, steering, or trim system.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement product, not an OEM component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts selected for dependable materials and real-world use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — We aim to provide practical replacement solutions with clear product information.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupport-Focused Service\u003c\/strong\u003e — Confirm your application details before ordering and contact support if you need help reviewing product measurements or installation requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718235459899,"sku":"WV-JALU-N3EB","price":64.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/WV-JALU-N3EB.png?v=1762958052"}],"url":"https:\/\/seasierra.com\/collections\/generic-2-stroke-125hp-outboard-marine-engine-parts.oembed","provider":"SeaSierra","version":"1.0","type":"link"}