{"title":"Mercury 35HP 4-Stroke Outboard Engine","description":"\u003csection id=\"hero\" style=\"padding:16px; border:1px solid #e5e7eb; border-radius:8px;\"\u003e\n  \u003cp\u003eThis page is dedicated to Mercury 4-Stroke 35HP outboard engines. Use it to find compatible parts and practical service information. Below you’ll find maintenance tips, common replacement parts, and troubleshooting guidance. You can also browse the main Mercury collection for a wider selection. Tip: scroll to the bottom of this page to start browsing parts for this engine, and on the collection page use the Filter \u0026amp; Sort controls to narrow results by horsepower, year range, and part category.\u003c\/p\u003e\n  \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\" style=\"display:inline-block; padding:10px 14px; background:#0b6; color:#fff; text-decoration:none; border-radius:6px;\"\u003eBrowse All Mercury Parts\u003c\/a\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"identify-model\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eHow to Identify Your 35HP Model\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eFind the serial\/nameplate on the starboard transom bracket or swivel bracket; it may also appear on a sticker near the powerhead.\u003c\/li\u003e\n    \u003cli\u003eRead the model description for “FourStroke” and “EFI,” and note Jet vs. propeller drive. Suffix letters typically indicate shaft length (e.g., L\/XL) and control type (tiller vs. remote).\u003c\/li\u003e\n    \u003cli\u003eFor 4-stroke models, look for the spin-on oil filter and oil fill on the powerhead. Jet variants may list power as “35 Jet,” which reflects jet-pump output rather than prop-shaft horsepower.\u003c\/li\u003e\n    \u003cli\u003eRecord the full serial number; it’s the most reliable way to confirm parts compatibility across the 25–40 hp FourStroke family.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"engine-overview\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eEngine Overview\u003c\/h2\u003e\n  \u003ch3\u003eFourStroke EFI Inline-4 (25–40 hp family)\u003c\/h3\u003e\n  \u003ctable style=\"width:100%; border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eFeature\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eDescription\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eConfiguration\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInline-4, FourStroke, EFI fuel injection. Offered in propeller gearcase and jet-pump variants.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eCommon Models\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eFourStroke 35 Jet; related FourStroke 25\/30\/40 hp models (many shared service parts).\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eAdvantages\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eSmooth, quiet operation with EFI efficiency; strong mid‑range torque. Jet option provides shallow‑water capability.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px;\"\u003eNotes\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003ePowerhead service items often interchange within the 25–40 hp family. Jet vs. prop affects lower unit\/jet pump parts (impeller housing, seals, and pump wear items). Always confirm by serial number.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"service-kits\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eRoutine Maintenance \u0026amp; Service Parts\u003c\/h2\u003e\n  \u003cp\u003eIntervals below are typical guidelines for FourStroke outboards. Always follow your official Mercury service manual and adjust for duty cycle, environment, and storage practices.\u003c\/p\u003e\n  \u003ctable style=\"width:100%; border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eItem\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eInterval*\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eRemarks\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eParts Link\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eEngine oil \u0026amp; filter\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eFirst 20 hrs, then every 100 hrs or annually\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eUse marine FC‑W oil; change filter with each oil service.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/oil-filters\"\u003eShop Oil Filters\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eGear oil (lower unit)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eEvery 100 hrs or annually; check after impacts\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect for water or metal on drain magnet. Jet models: service jet pump oil per manual.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\"\u003eMercury Parts\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eSpark plugs\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect every 100 hrs; replace as needed\/annually\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eCheck gap and condition; replace sooner for heavy trolling or fouling.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/spark-plug\"\u003eShop Spark Plugs\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eFuel filter \/ water-separating filter\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect at 50–100 hrs; replace annually\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eReplace more often with ethanol fuel or contamination.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/fuel-filters-1\"\u003eShop Fuel Filters\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eWater pump impeller \/ kit\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eEvery 2 seasons or 200 hrs (inspect annually)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eEssential for cooling. Sandy\/shallow use may require more frequent service.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-water-pump-repair-kits\"\u003eMercury Water Pump Kits\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eAnodes (corrosion protection)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect every 50 hrs; replace when 50% consumed\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eMatch anode material to water type (fresh\/brackish\/salt).\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/anodes\"\u003eShop Anodes\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px;\"\u003eLower unit\/jet seals (inspection)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eInspect at service or if leaks found\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eMilky oil or seepage indicates seal issues; verify gearcase vs. jet pump before ordering.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-lower-unit-seal-kits\"\u003eMercury Lower Unit Seal Kits\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n  \u003cp style=\"font-size:12px; color:#6b7280;\"\u003e*General guidance. Follow the maintenance schedule and specifications in your official Mercury manual.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"common-parts\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eFrequently Used Parts Categories\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eRoutine Service: \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\"\u003eMercury Outboard Parts\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eCooling System: \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-water-pump-repair-kits\"\u003eMercury Water Pump Repair Kits\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eLower Unit \u0026amp; Seals: \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-lower-unit-seal-kits\"\u003eMercury Lower Unit Seal Kits\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eFuel System: \u003ca href=\"https:\/\/seasierra.com\/collections\/fuel-filters-1\"\u003eFuel Filters\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eIgnition \/ Electrical: \u003ca href=\"https:\/\/seasierra.com\/collections\/spark-plug\"\u003eSpark Plugs\u003c\/a\u003e and \u003ca href=\"https:\/\/seasierra.com\/collections\/starters\"\u003eStarters\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eCorrosion Protection: \u003ca href=\"https:\/\/seasierra.com\/collections\/anodes\"\u003eAnodes\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003ePropulsion \u0026amp; Handling: \u003ca href=\"https:\/\/seasierra.com\/collections\/propellers\"\u003ePropellers\u003c\/a\u003e and \u003ca href=\"https:\/\/seasierra.com\/collections\/outboard-hydrofoil-stabilizers\"\u003eOutboard Hydrofoil Stabilizers\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"troubleshooting\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eCommon Symptoms \u0026amp; Quick Checks\u003c\/h2\u003e\n  \u003ctable style=\"width:100%; border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eSymptom\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eCheck First\u003c\/th\u003e\n        \u003cth style=\"text-align:left; border-bottom:1px solid #e5e7eb; padding:8px;\"\u003eRelated Parts\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eWeak tell‑tale stream or overheat alarm\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eInspect intake screens for debris; verify impeller condition; check thermostat operation.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eWater pump kit\/impeller, intake screen, thermostat, anodes (cooling passages).\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003ePoor acceleration or loss of power\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eReplace\/inspect fuel filter; verify spark plugs; check prop condition or jet intake for damage.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eFuel filter, spark plugs, propeller\/jet wear parts, EFI sensors.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eHard starting or rough idle (cold or hot)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eCheck fuel quality; inspect plugs and plug wires; verify battery and connections; look for vacuum leaks.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px; border-bottom:1px solid #f0f0f0;\"\u003eSpark plugs, fuel filter, hoses\/clamps, starter\/battery cables, EFI sensors.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:8px;\"\u003eGearcase noise or metal in gear oil (prop models)\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eInspect prop and propshaft for damage; change gear oil and check for water; perform seal test.\u003c\/td\u003e\n        \u003ctd style=\"padding:8px;\"\u003eLower unit seal kit, propeller, shims\/bearings (professional diagnosis recommended).\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"faq\" style=\"margin-top:24px;\"\u003e\n  \u003ch2\u003eFAQs\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre parts interchangeable between different years or between jet and prop models?\u003c\/summary\u003e\n    \u003cp\u003eMany powerhead service items are shared across Mercury FourStroke 25–40 hp engines, but lower unit and jet pump parts differ. Always confirm with the engine serial number before ordering seals, water pump housings, or propulsion components.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhen should I replace the water pump impeller?\u003c\/summary\u003e\n    \u003cp\u003eAs a rule, inspect annually and replace every 2 seasons or ~200 hours. Engines used in sandy, silty, or shallow conditions may need more frequent replacement.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow often should I change the gear oil?\u003c\/summary\u003e\n    \u003cp\u003eEvery 100 hours or annually, and any time you suspect impact or see signs of water intrusion. Jet models follow jet pump oil and service procedures in the manual.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat information helps confirm part compatibility?\u003c\/summary\u003e\n    \u003cp\u003eProvide the full serial number, model description (FourStroke EFI), shaft length, control type (tiller\/remote), and whether it’s a jet or prop model. Photos of the nameplate and the part being replaced are also helpful.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"cta\" style=\"margin-top:24px; padding:16px; border:1px solid #e5e7eb; border-radius:8px;\"\u003e\n  \u003cp\u003eReady to find parts for your Mercury FourStroke 35HP? Browse the main Mercury collection and filter by horsepower, year, and category to locate the right components.\u003c\/p\u003e\n  \u003ca href=\"https:\/\/seasierra.com\/collections\/mercury-outboard-parts\" style=\"display:inline-block; padding:10px 14px; background:#0b6; color:#fff; text-decoration:none; border-radius:6px;\"\u003eShop Mercury Outboard Parts\u003c\/a\u003e\n  \u003cp style=\"margin-top:8px; font-size:12px; color:#6b7280;\"\u003eIf you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.\u003c\/p\u003e\n\u003c\/section\u003e","products":[{"product_id":"fuel-filter-fits-mercury-marine-4-85-hp-inline-engines-replaces-1399-3938","title":"Fuel Filter – Fits Mercury Marine 4-85 HP Inline Engines (Replaces 1399-3938)","description":"\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eFuel Filter – Fits Mercury Marine 4-85 HP Inline Engines (Replaces 1399-3938)\u003c\/strong\u003e is designed for a wide range of Mercury Marine 2-stroke and 4-stroke inline engines from 4 HP to 85 HP, covering various years. It is also compatible with select Johnson\/Evinrude models requiring part #0509400.\u003c\/p\u003e\n\u003cp\u003eIt directly replaces Mercury parts 1399-3938, 399-39380, 1754, and 3938, as well as Sierra 18-7832 and Johnson\/Evinrude 0509400.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for inline installation on carbureted engines.\u003c\/li\u003e\n\u003cli\u003eSpecifically engineered for use with side bowl carburetors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e399-39380\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1754\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e3938\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-7832\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n\u003ctd\u003e0509400\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eFor Mercury Marine, this filter fits a broad range of 2-stroke models from 4 HP up to 150 HP across various years. Please verify your specific model and OEM part number.\u003c\/p\u003e\n\u003cp\u003eFor Johnson\/Evinrude, compatibility is based on the OEM part number cross-reference (0509400). Specific models are not detailed; please verify your part number before ordering.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4 (1 CYL. PRODUCT OF USA)\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1980–1986\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4.5\u003c\/td\u003e\n\u003ctd\u003e4.5\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1975–1986\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e9.8\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 10\/10A\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 15A\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 25\/25E\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 28\/28A\/28AD\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 30H\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e350\/MARK 35A\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e400\/402\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1975–Various\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 55\/55E\/55H\/55AE\/55AM\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 58E\/58AE\u003c\/td\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e650 (3 Cyl\/4 Cyl)\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1967–1975\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eMARK 75\/75A\/MARK 78\/78A\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e700\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e800\/800 80\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e850\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1975\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e900\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e950\u003c\/td\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1000\/1000SS\/1000BP\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1100\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1150\u003c\/td\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1973–1985\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1250\/1250BP\u003c\/td\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1400\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1973–1985\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e100, 150, 200, 250\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e300 350\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e1399-3938\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n\u003ctd\u003eVarious Models\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e0509400\u003c\/td\u003e\n\u003ctd\u003eCross-reference provided but specific models not detailed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eInline Fuel Filter\u003c\/dd\u003e\n\u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eInline, carbureted engines\u003c\/dd\u003e\n\u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\u003c\/dd\u003e\n\u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eInline\u003c\/dd\u003e\n\u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e5.56\" H x 1.88\" W x 1.31\" L\u003c\/dd\u003e\n\u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eFor use with side bowl carburetors\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e1\u003c\/span\u003e x Fuel Filter (1399-3938)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShut off the fuel supply to the engine and place a suitable container underneath the work area to catch any fuel spillage.\u003c\/li\u003e\n\u003cli\u003eCarefully locate the existing inline fuel filter. Loosen the clamps securing the fuel lines to both ends of the old filter.\u003c\/li\u003e\n\u003cli\u003eGently twist and pull the fuel lines off the filter. Be prepared for a small amount of residual fuel to drain out.\u003c\/li\u003e\n\u003cli\u003eNote the fuel flow direction arrow on the new filter. Install it so the arrow points toward the engine's carburetor.\u003c\/li\u003e\n\u003cli\u003eSlide the fuel lines onto the new filter and securely fasten the clamps. Ensure they are snug to prevent leaks.\u003c\/li\u003e\n\u003cli\u003eTurn the fuel supply back on and prime the engine if necessary. Thoroughly inspect the filter and connections for any signs of leaks before starting the engine.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I know if this fuel filter will fit my engine?\u003c\/summary\u003e\u003cp\u003eThis filter is designed for a wide array of Mercury inline engines (4-85+ HP) and select Johnson\/Evinrude models. The most reliable way to confirm fitment is to match your existing part number to one of the cross-references: Mercury 1399-3938, Sierra 18-7832, or Johnson\/Evinrude 0509400. Also, check the detailed compatibility table for your specific model.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the signs of a clogged or failing fuel filter?\u003c\/summary\u003e\u003cp\u003eCommon symptoms include the engine sputtering or bogging down during acceleration, difficulty starting, rough idling, or a noticeable loss of overall power. In some cases, the engine may stall and refuse to restart. Visual inspection might reveal debris inside the filter if it has a clear housing.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the recommended replacement interval for this filter?\u003c\/summary\u003e\u003cp\u003eFor optimal engine health and performance, we recommend replacing your inline fuel filter at least once per season or every 100 hours of operation, whichever comes first. Consult your engine’s service manual for manufacturer-specific recommendations.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this filter for fuel-injected (EFI) or carbureted engines?\u003c\/summary\u003e\u003cp\u003eThis is an inline filter specifically designed for carbureted engines. It is particularly noted for use with systems that have a side bowl carburetor. It is not suitable for high-pressure fuel-injected (EFI\/DFI) systems.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50602603741499,"sku":"1399-3938","price":15.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/1399-3938_4f353e1f-30dc-4dd1-aa81-33532441ddad.jpg?v=1758594959"},{"product_id":"hydrofoil-stabilizer-fits-outboard-motors-5-150-hp-replaces-seasierra-fo2001-uanofcn-fo2001","title":"Hydrofoil Stabilizer – Fits Outboard Motors 5-150 HP (Replaces SeaSierra FO2001, UanofCn FO2001)","description":"\u003csection\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis dorsal fin style \u003cstrong\u003eHydrofoil Stabilizer\u003c\/strong\u003e is designed for outboard motors and stern drives from 5 to 150 HP. By mounting to the anti-ventilation plate, it helps boats get on plane faster, reduces bow rise and porpoising, and can significantly improve fuel efficiency at cruising speeds. It offers a universal fit for a wide range of Yamaha, Mercury, Honda, Suzuki, Tohatsu, Johnson, and Evinrude models.\u003c\/p\u003e\n\u003cp\u003eThis part is a direct replacement for SeaSierra FO2001, UanofCn FO2001, QuickMarine HS001, and other equivalents.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstalls directly to the anti-ventilation plate with included bolt-on hardware.\u003c\/li\u003e\n\u003cli\u003eConstructed from durable, marine-grade reinforced PA66 nylon plastic.\u003c\/li\u003e\n\u003cli\u003eThe kit includes all necessary stainless steel mounting hardware for a complete installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket brands.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSeaSierra\u003c\/td\u003e\n        \u003ctd\u003eFO2001\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eUanofCn\u003c\/td\u003e\n        \u003ctd\u003eFO2001\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eQuickMarine\u003c\/td\u003e\n        \u003ctd\u003eHS001\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eXingrong\u003c\/td\u003e\n        \u003ctd\u003eHS001\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eNorthBoat\u003c\/td\u003e\n        \u003ctd\u003eHS001\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model and horsepower in the table below.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eYamaha\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n       \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMariner\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eHonda\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSuzuki\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eTohatsu\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n       \u003ctr\u003e\n        \u003ctd\u003eJohnson\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n       \u003ctr\u003e\n        \u003ctd\u003eEvinrude\u003c\/td\u003e\n        \u003ctd\u003eOutboards\u003c\/td\u003e\n        \u003ctd\u003e5–150\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n       \u003c\/tr\u003e\n       \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eStern Drives\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n       \u003ctr\u003e\n        \u003ctd\u003eOMC\u003c\/td\u003e\n        \u003ctd\u003eStern Drives\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003eAftermarket\u003c\/td\u003e\n        \u003ctd\u003eUniversal fit\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eHydrofoil Stabilizer \/ Planing Aid\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eMounts to anti-ventilation plate with included hardware\u003c\/dd\u003e\n  \u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\u003c\/dd\u003e\n  \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eBolt-on with supplied hardware\u003c\/dd\u003e\n  \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eMarine Grade Reinforced PA66 Nylon Plastic\u003c\/dd\u003e\n  \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack (Yellow, Blue, Gray, White variants available)\u003c\/dd\u003e\n  \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e10-1\/4\" × 8-1\/4\" (260.4 mm × 209.6 mm)\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e2.41 pounds (1.09 kg)\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eUniversal fit for outboard motors and stern drives\u003c\/dd\u003e\n  \u003cdt\u003eThread Size\u003c\/dt\u003e\n\u003cdd\u003eIncludes stainless steel mounting hardware\u003c\/dd\u003e\n  \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eDorsal fin style design with enhanced wing surface area\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Hydrofoil Stabilizer\u003c\/li\u003e\n  \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e4 x Sets of Stainless Steel Mounting Hardware (bolts and nuts)\u003c\/span\u003e\u003c\/li\u003e\n  \u003cli\u003e1 x Installation Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eEnsure the engine is off and the boat is securely trailered or on a lift.\u003c\/li\u003e\n  \u003cli\u003ePlace the hydrofoil on the anti-ventilation plate, ensuring it is centered.\u003c\/li\u003e\n  \u003cli\u003eMark the drilling-hole locations on the plate through the mounting holes of the hydrofoil.\u003c\/li\u003e\n  \u003cli\u003eRemove the hydrofoil and drill the marked holes using an appropriately sized drill bit.\u003c\/li\u003e\n  \u003cli\u003ePlace the hydrofoil back onto the plate, aligning the holes.\u003c\/li\u003e\n  \u003cli\u003eInsert the stainless steel bolts from the top and attach the nuts from the bottom.\u003c\/li\u003e\n  \u003cli\u003eTighten the hardware securely, but do not overtighten to avoid cracking the plate.\u003c\/li\u003e\n  \u003cli\u003eCheck for a firm fit with no movement. The installation is now complete.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill this fit my specific XYZ HP motor?\u003c\/summary\u003e\n  \u003cp\u003eThis hydrofoil is designed for universal fitment on most outboard motors and stern drives in the 5 to 150 HP range. It is compatible with major brands like Yamaha, Mercury, Honda, and more. Always verify your anti-ventilation plate dimensions against the product specs (10-1\/4\" × 8-1\/4\") to ensure proper mounting.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat is the main benefit of the dorsal fin style?\u003c\/summary\u003e\n  \u003cp\u003eThe dorsal fin design helps to reduce or eliminate cavitation by channeling water flow more effectively over the propeller. This improves tracking and stability, especially during turns, complementing the lift provided by the hydrofoil wings.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan this hydrofoil reduce porpoising?\u003c\/summary\u003e\n  \u003cp\u003eYes, one of the primary functions of a hydrofoil is to combat porpoising (the rhythmic bouncing of the bow). By providing stern lift, it keeps the bow down and forces the hull to maintain a more consistent and stable attitude in the water.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDo I need to drill holes in my engine?\u003c\/summary\u003e\n  \u003cp\u003eYes, installation requires drilling four holes into the anti-ventilation (cavitation) plate of your outboard motor or stern drive. The package includes all necessary mounting hardware.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill this affect my boat's top speed?\u003c\/summary\u003e\n  \u003cp\u003eHydrofoils can slightly reduce top-end speed by a small margin (typically 1-2 MPH) due to increased drag. However, this is often offset by significant gains in hole shot, low-speed planing ability, and improved fuel economy at cruising speeds.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow often should I check the mounting hardware?\u003c\/summary\u003e\n  \u003cp\u003eIt is good practice to inspect the mounting bolts and nuts as part of your regular pre-launch checklist, especially after the first few uses to ensure they remain tight. Check for tightness and signs of corrosion at least once per season.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost?\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns?\u003c\/summary\u003e\n  \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717907124539,"sku":"19HS001FO2001","price":32.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/19HS001FO2001.png?v=1762938111"},{"product_id":"hydrofoil-stabilizer-fits-outboard-and-stern-drive-motors-5-150-hp-replaces-seasierra-fo2001-uanofcn-fo2001","title":"Hydrofoil Stabilizer – Fits Outboard and Stern Drive Motors 5–150 HP (Replaces SeaSierra FO2001, UanofCn FO2001)","description":"\u003csection\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis SeaSierra \u003cstrong\u003eHydrofoil Stabilizer\u003c\/strong\u003e is designed for outboard and stern drive motors ranging from 5 to 150 HP. It enhances performance by improving planing, stability, and fuel efficiency. It is compatible with a wide array of engines including Mercury, Johnson, Evinrude, Yamaha, Honda, Suzuki, and Tohatsu (both 2-stroke and 4-stroke models).\u003c\/p\u003e\n\u003cp\u003eThis part serves as a direct replacement for SeaSierra FO2001 and UanofCn FO2001 references.\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eInstallation Method: Transom Mount (Drilling Required)\u003c\/li\u003e\n    \u003cli\u003eHousing Material: UV-Resistant Reinforced Nylon PA66 Plastic\u003c\/li\u003e\n    \u003cli\u003eIncluded Hardware: Comes with stainless steel mounting screws, nuts, and a drill bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSeaSierra\u003c\/td\u003e\n        \u003ctd\u003eFO2001\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eUanofCn\u003c\/td\u003e\n        \u003ctd\u003eFO2001\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eHP Range\u003c\/th\u003e\n        \u003cth\u003eEngine Type\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e5-150 HP\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke, 4-Stroke\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\u003c\/td\u003e\n        \u003ctd\u003e5-150 HP\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke, 4-Stroke\u003c\/td\u003e\n      \u003c\/tr\u003e\n       \u003ctr\u003e\n        \u003ctd\u003eEvinrude\u003c\/td\u003e\n        \u003ctd\u003e5-150 HP\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke, 4-Stroke\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eYamaha\u003c\/td\u003e\n        \u003ctd\u003e5-150 HP\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke, 4-Stroke\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eHonda\u003c\/td\u003e\n        \u003ctd\u003e5-150 HP\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke, 4-Stroke\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSuzuki\u003c\/td\u003e\n        \u003ctd\u003e5-150 HP\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke, 4-Stroke\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eTohatsu\u003c\/td\u003e\n        \u003ctd\u003e5-150 HP\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke, 4-Stroke\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercruiser\u003c\/td\u003e\n        \u003ctd\u003e-\u003c\/td\u003e\n        \u003ctd\u003eStern Drives\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eOMC\u003c\/td\u003e\n        \u003ctd\u003e-\u003c\/td\u003e\n        \u003ctd\u003eStern Drives\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eHydrofoil Stabilizer\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eTransom Mount\u003c\/dd\u003e\n  \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eMarine Grade Nylon PA66 Plastic\u003c\/dd\u003e\n  \u003cdt\u003eAvailable Colors\u003c\/dt\u003e\n\u003cdd\u003eBlue, Black, Gray, Yellow, White\u003c\/dd\u003e\n  \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003eH: 10-1\/4 inches (260 mm), W: 8-1\/4 inches (210 mm)\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e2.4 pounds (1.09 kg)\u003c\/dd\u003e\n  \u003cdt\u003eMaximum Horsepower\u003c\/dt\u003e\n\u003cdd\u003e150 HP\u003c\/dd\u003e\n  \u003cdt\u003eCompatible Engine Type\u003c\/dt\u003e\n\u003cdd\u003e2-Stroke, 4-Stroke\u003c\/dd\u003e\n  \u003cdt\u003ePackage Dimensions\u003c\/dt\u003e\n\u003cdd\u003e14.09 × 8.78 × 1.34 inches (358 × 223 × 34 mm)\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e1 x Hydrofoil Stabilizer (FO2001)\u003c\/li\u003e\n    \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e4 x Sets Stainless Steel Screws and Nuts\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e1 x 6.5mm Drill Bit\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e1 x Installation Instruction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n    \u003cli\u003eDisconnect the engine's battery for safety before starting work.\u003c\/li\u003e\n    \u003cli\u003eCenter the hydrofoil on top of the anti-cavitation plate of your outboard or stern drive. Ensure it is positioned correctly according to the manufacturer's instructions for optimal performance.\u003c\/li\u003e\n    \u003cli\u003eWith the hydrofoil held firmly in place, use a marker to mark the drilling locations through the mounting holes.\u003c\/li\u003e\n    \u003cli\u003eRemove the hydrofoil and carefully drill the marked holes using the included 6.5mm drill bit.\u003c\/li\u003e\n    \u003cli\u003ePlace the hydrofoil back onto the plate, aligning the holes. Insert the stainless steel screws and fasten them securely with the provided nuts.\u003c\/li\u003e\n    \u003cli\u003eTighten all bolts evenly, but do not over-tighten, as this could damage the plate or the hydrofoil. Check for a snug and secure fit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are the main benefits of installing a hydrofoil?\u003c\/summary\u003e\n  \u003cp\u003eA hydrofoil helps your boat get on plane faster, especially with heavier loads. It also improves stability, reduces porpoising (bow bouncing), and can enhance fuel efficiency by allowing the boat to stay on plane at lower RPMs.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill this fit my specific engine model?\u003c\/summary\u003e\n  \u003cp\u003eThis hydrofoil is designed for universal fit on most outboard and stern drive motors from 5 to 150 HP. The key is to ensure your engine's anti-cavitation plate is large enough to accommodate the hydrofoil's dimensions (10-1\/4\" x 8-1\/4\"). Always measure your plate before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs drilling into my engine's cavitation plate required?\u003c\/summary\u003e\n  \u003cp\u003eYes, installation requires drilling four holes into the anti-cavitation plate. All necessary stainless steel mounting hardware and a drill bit are included in the package to complete the installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are signs that my old hydrofoil might need replacement?\u003c\/summary\u003e\n  \u003cp\u003eInspect your current hydrofoil for cracks, warping, or significant damage, especially around the mounting points. A compromised hydrofoil can reduce performance or break off, so it's best to replace it if you notice any structural issues.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan this hydrofoil cause any negative effects on my boat?\u003c\/summary\u003e\n  \u003cp\u003eWhen installed correctly on a compatible motor, a hydrofoil should improve performance. However, incorrect installation or using it on an overpowered engine can potentially affect handling. It's crucial to follow instructions and use it within the 150 HP limit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost?\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns?\u003c\/summary\u003e\n  \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cb\u003ePro-Grade Standards\u003c\/b\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cb\u003eFast Global Fulfillment\u003c\/b\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cb\u003eManufacturer-Direct Value\u003c\/b\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717907157307,"sku":"SS-19HS001-B","price":28.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/SS-19HS001-B.png?v=1762938112"},{"product_id":"transom-support-saver-fits-mercury-yamaha-suzuki-honda-outboard-replaces-my-wedge","title":"Transom Support Saver – Fits Mercury, Yamaha, Suzuki, Honda Outboard (Replaces MY Wedge)","description":"\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThe Sea Sierra \u003cstrong\u003eSingle Ram Boat Transom Support Saver\u003c\/strong\u003e provides essential protection for your outboard motor's hydraulic trim\/tilt system and reduces stress on your boat’s transom during trailering. It is designed for a broad range of vessels equipped with a single-ram system, including Mercury (15–200 HP 4-Stroke), Yamaha (9–90 HP \u0026amp; F115LB), Suzuki, and Honda outboard motors.\u003c\/p\u003e\n  \u003cp\u003eThis unit serves as a direct replacement for parts like the QuickMarine Transom Saver and MY Wedge Single Ram Universal Outboard Trailering Support.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Manual fitment requires no specialized tools.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Constructed from Marine Grade High Density EPDM Rubber for maximum shock absorption.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Safe for both saltwater and freshwater applications.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n  \u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eModel\u003c\/th\u003e\n          \u003cth\u003eRated HP\u003c\/th\u003e\n          \u003cth\u003eStroke\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e15-200\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eIncludes Verado 6-Cylinder\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003eStandard Models\u003c\/td\u003e\n          \u003ctd\u003e9-90\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003eF115LB\u003c\/td\u003e\n          \u003ctd\u003e115\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eNew F115LB model specifically mentioned\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSuzuki\u003c\/td\u003e\n          \u003ctd\u003eModels with Single-Ram Trim\/Tilt\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHonda\u003c\/td\u003e\n          \u003ctd\u003eModels with Single-Ram Trim\/Tilt\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eTransom Support Saver\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eManual\u003c\/dd\u003e\n    \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eMarine Grade High Density EPDM Rubber\u003c\/dd\u003e\n    \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n    \u003cdt\u003eEngine Type\u003c\/dt\u003e\n\u003cdd\u003eCompatible with 2-Stroke and 4-Stroke\u003c\/dd\u003e\n    \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e8.7 in (L) × 2 in (D) (221 mm × 50.8 mm)\u003c\/dd\u003e\n    \u003cdt\u003eCompatibility\u003c\/dt\u003e\n\u003cdd\u003eSingle-Ram Trim\/Tilt System\u003c\/dd\u003e\n    \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eTrailering Support\u003c\/dd\u003e\n    \u003cdt\u003eFeatures\u003c\/dt\u003e\n\u003cdd\u003eReduces vibration, protects outboard engine, prevents damage to tilt\/trim unit\u003c\/dd\u003e\n    \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eSafe for both saltwater and freshwater applications\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x Transom Support Saver\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e2 x\u003c\/span\u003e Trailering Motor Locks (4.15 in (L) × 1.15 in (W) × 1.55 in (H))\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003cp\u003eThis transom support system braces and protects the outboard engine while reducing strain to the transom when trailering. The rubber material absorbs shock loads and dampens vibration during transport. Unlike traditional metal transom savers, this design minimizes scraping between metal parts and the transom. The hydraulic steering stop locks help stabilize the engine and prevent side-to-side movement during transit.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is a transom support saver and why do I need one?\u003c\/summary\u003e\n    \u003cp\u003eIt protects your outboard engine and transom by bracing the motor and absorbing shocks during trailering. This prevents wear on the hydraulic trim\/tilt system and reduces structural stress on the boat's transom.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does this differ from traditional metal transom savers?\u003c\/summary\u003e\n    \u003cp\u003eThis support is made of high-density EPDM rubber, which absorbs vibration and prevents the metal-on-metal scraping and impact common with traditional savers. It offers cushioned support without direct frame contact.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this compatible with my specific engine?\u003c\/summary\u003e\n    \u003cp\u003eIt is designed for outboard motors equipped with a single-ram trim\/tilt system, including specific Mercury, Yamaha, Suzuki, and Honda models. Always verify your engine has a single-ram system before purchasing.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat do the trailering motor locks do?\u003c\/summary\u003e\n    \u003cp\u003eThe two included steering stop locks clip onto the hydraulic steering rams to stabilize the engine and prevent it from pivoting side-to-side during transit, providing extra security against unwanted movement.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the proper maintenance for this part?\u003c\/summary\u003e\n    \u003cp\u003ePeriodically inspect the rubber for cracks, deep gouges, or signs of dry rot. Clean with fresh water after use in saltwater environments to prolong its life. Replace the unit if you see any signs of significant material degradation.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n    \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\n    \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\n    \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717907222843,"sku":"1RamTS-Black-Grey","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/1RamTS-Black-Grey.png?v=1762938115"},{"product_id":"thermostat-fits-johnson-evinrude-6-250-hp-v4-v6-outboard-motors-replaces-5005440-434841","title":"Thermostat – Fits Johnson\/Evinrude 6-250 HP V4\/V6 Outboard Motors (Replaces 5005440, 434841)","description":"\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis high-quality \u003cstrong\u003eMarine Thermostat – Fits Johnson Evinrude 6-250 HP V4\/V6 Outboard Motors (Replaces 5005440, 434841)\u003c\/strong\u003e is designed for a wide range of Johnson\/Evinrude 2-Stroke V4\/V6 engines (6-250 HP, 1973–2006) and select 4-Stroke models (9.9-15 HP, 1994–2001). Its 143°F (62°C) temperature rating ensures your engine's cooling system operates correctly for optimal performance and longevity.\u003c\/p\u003e\n\u003cp\u003eThis thermostat is a direct replacement for Johnson\/Evinrude part numbers 5005440, 8330720, 378065, 393659, 434841, 437414, and 508626, as well as Mercury 62981, 66850, 75692, 75692B and Sierra 18-3543 or 18-3553.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered as a direct-fit replacement for straightforward installation.\u003c\/li\u003e\n  \u003cli\u003eOpens at 143°F (62°C) to maintain correct engine operating temperature.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet or exceed OEM specifications for reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003e5005440\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003e8330720\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003e378065\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003e393659\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003e434841\u003c\/td\u003e\n      \u003c\/tr\u003e\n        \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003e437414\u003c\/td\u003e\n      \u003c\/tr\u003e\n        \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003e508626\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e62981\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e66850\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e75692\u003c\/td\u003e\n      \u003c\/tr\u003e\n        \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e75692B\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e18-3543\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e18-3553\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eFor Johnson\/Evinrude motors, this thermostat fits a broad range of 2-stroke and 4-stroke models produced between 1973 and 2006.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Johnson\/Evinrude Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003eFour-Stroke\u003c\/td\u003e\n        \u003ctd\u003e9.9\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1994–2001\u003c\/td\u003e\n        \u003ctd\u003e5005440, 434841\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003eFour-Stroke\u003c\/td\u003e\n        \u003ctd\u003e15\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1994–2001\u003c\/td\u003e\n        \u003ctd\u003e5005440, 434841\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003eV4 Models\u003c\/td\u003e\n        \u003ctd\u003e40–250\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1973–2006\u003c\/td\u003e\n        \u003ctd\u003e5005440, 434841\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003eV6 Models\u003c\/td\u003e\n        \u003ctd\u003e60–250\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1973–2006\u003c\/td\u003e\n        \u003ctd\u003e5005440, 434841\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003eVarious Models\u003c\/td\u003e\n        \u003ctd\u003e6–55\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1973–2006\u003c\/td\u003e\n        \u003ctd\u003e5005440, 434841\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eFor Mercury\/Mariner motors, the part serves as a cross-reference. Please verify your specific application before ordering.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Mercury\/Mariner Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e62981, 66850, 75692, 75692B\u003c\/td\u003e\n        \u003ctd\u003eCross-reference application only\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eMarine Outboard Thermostat\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect replacement\u003c\/dd\u003e\n  \u003cdt\u003eTemperature Rating\u003c\/dt\u003e\n\u003cdd\u003e143°F (62°C)\u003c\/dd\u003e\n  \u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\u003c\/dd\u003e\n  \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eBrass\/Stainless Steel (varies by manufacturer)\u003c\/dd\u003e\n  \u003cdt\u003eOperating Temperature\u003c\/dt\u003e\n\u003cdd\u003e62°C (143°F) opening temperature\u003c\/dd\u003e\n  \u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003eVaries by manufacturer (typically 1-year limited warranty)\u003c\/dd\u003e\n  \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eManufactured to OEM specifications\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Thermostat (5005440)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e2 x Thermostat Seals (0329319)\u003c\/span\u003e (Note: Seals are not included by all manufacturers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery and ensure the engine is cool to the touch.\u003c\/li\u003e\n  \u003cli\u003eLocate the thermostat housing on the engine block or cylinder head.\u003c\/li\u003e\n  \u003cli\u003ePlace a drain pan under the housing and slowly loosen the bolts to drain the coolant.\u003c\/li\u003e\n  \u003cli\u003eRemove the housing cover, old thermostat, and any existing gasket or seal material.\u003c\/li\u003e\n  \u003cli\u003eClean the mating surfaces of the housing and cover thoroughly.\u003c\/li\u003e\n  \u003cli\u003eInstall the new thermostat, ensuring it is oriented correctly.\u003c\/li\u003e\n  \u003cli\u003ePlace the new seal or gasket onto the housing.\u003c\/li\u003e\n  \u003cli\u003eReinstall the housing cover and tighten the bolts to the manufacturer's specified torque.\u003c\/li\u003e\n  \u003cli\u003eRefill the cooling system with the appropriate coolant.\u003c\/li\u003e\n  \u003cli\u003eReconnect the battery, start the engine, and check for leaks and proper temperature gauge operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I know if my thermostat is failing?\u003c\/summary\u003e\n  \u003cp\u003eCommon signs include engine overheating (gauge reads high), or the engine not reaching operating temperature (gauge reads low). You may also notice poor performance, increased fuel consumption, or steam from the engine.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs 143°F the correct temperature for my engine?\u003c\/summary\u003e\n  \u003cp\u003eThis 143°F (62°C) thermostat is the specified temperature for the listed Johnson\/Evinrude and cross-referenced models. Using the correct temperature is critical for engine performance and preventing carbon buildup.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I test my old thermostat?\u003c\/summary\u003e\n  \u003cp\u003eYes. Suspend the thermostat in a pot of water with a thermometer. Heat the water and observe the temperature at which it starts to open. If it fails to open at or near its rated temperature (143°F), it should be replaced.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes this thermostat fit both 2-stroke and 4-stroke engines?\u003c\/summary\u003e\n  \u003cp\u003eYes, it is designed for a wide range of 2-Stroke V4\/V6 engines from 1973-2006 and specific 4-Stroke 9.9\/15 HP models from 1994–2001. Always verify your exact model and year in the compatibility chart.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDo I need to replace the seals at the same time?\u003c\/summary\u003e\n  \u003cp\u003eIt is highly recommended to replace the thermostat seals or gaskets whenever the thermostat is replaced to ensure a leak-proof seal. While this kit includes seals, availability may vary by supplier, so confirm contents upon purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost?\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns?\u003c\/summary\u003e\n  \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003ePro-Grade Standards — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n\t\u003cli\u003eFast Global Fulfillment — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n\t\u003cli\u003eManufacturer-Direct Value — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717907648827,"sku":"GH-TH20005-J","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/GH-TH20005-J.png?v=1762938132"},{"product_id":"hydrofoil-stabilizer-fins-fits-outboard-motors-up-to-50hp-4-50-hp-replaces-five-oceans-fo-4470-se-sport-300","title":"Hydrofoil Stabilizer Fins – Fits Outboard Motors Up to 50HP (4-50 HP) (Replaces Five Oceans FO-4470, SE Sport 300)","description":"\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n    \u003ch2\u003eProduct Details\u003c\/h2\u003e\n    \u003cp\u003eThese \u003cstrong\u003eHydrofoil Stabilizer Fins\u003c\/strong\u003e are designed to improve performance and stability for outboard motors ranging from 4 to 50 HP. Suitable for a wide variety of brands including Mercury, Yamaha, Evinrude, and Honda, they help boats get on plane faster and stay on plane at lower speeds. The two-piece design allows each foil to flex independently, absorbing shock and providing a smoother ride.\u003c\/p\u003e\n    \u003cp\u003eThis part serves as a direct replacement for Five Oceans FO-4470 and can be used in similar applications as the SE Sport 300.\u003c\/p\u003e\n    \u003cul\u003e\n        \u003cli\u003eInstalls via a simple bolt-on process directly to the anti-ventilation plate (drilling required).\u003c\/li\u003e\n        \u003cli\u003eConstructed from high-strength, UV-resistant black plastic for durability in marine environments.\u003c\/li\u003e\n        \u003cli\u003eKit includes all necessary stainless steel mounting hardware.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n    \u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n    \u003cdiv class=\"ss-table-wrap\"\u003e\n        \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n            \u003cthead\u003e\n                \u003ctr\u003e\n                    \u003cth\u003eBrand\u003c\/th\u003e\n                    \u003cth\u003ePart Number\u003c\/th\u003e\n                    \u003cth\u003eNotes\u003c\/th\u003e\n                \u003c\/tr\u003e\n            \u003c\/thead\u003e\n            \u003ctbody\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eFive Oceans\u003c\/td\u003e\n                    \u003ctd\u003eFO-4470\u003c\/td\u003e\n                    \u003ctd\u003e\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eSE Sport\u003c\/td\u003e\n                    \u003ctd\u003e300\u003c\/td\u003e\n                    \u003ctd\u003eFor similar applications\u003c\/td\u003e\n                \u003c\/tr\u003e\n            \u003c\/tbody\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n    \u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n    \u003cdiv class=\"ss-table-wrap\"\u003e\n        \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n            \u003cthead\u003e\n                \u003ctr\u003e\n                    \u003cth\u003eBrand\u003c\/th\u003e\n                    \u003cth\u003eModel\u003c\/th\u003e\n                    \u003cth\u003eRated HP\u003c\/th\u003e\n                    \u003cth\u003eStroke\u003c\/th\u003e\n                \u003c\/tr\u003e\n            \u003c\/thead\u003e\n            \u003ctbody\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eMercury\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eMariner\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eYamaha\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eJohnson\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eEvinrude\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eHonda\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eTohatsu\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eSuzuki\u003c\/td\u003e\n                    \u003ctd\u003eVarious\u003c\/td\u003e\n                    \u003ctd\u003e4-50 HP\u003c\/td\u003e\n                    \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n                \u003c\/tr\u003e\n            \u003c\/tbody\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n    \u003cdl\u003e\n        \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eOutboard Engine Hydrofoil Stabilizer Fins\u003c\/dd\u003e\n        \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eBolt-on (4 mounting holes)\u003c\/dd\u003e\n        \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eDirect mount to anti-ventilation plate (cavitation plate)\u003c\/dd\u003e\n        \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eHigh-strength black plastic, UV-resistant\u003c\/dd\u003e\n        \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n        \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003eApproximately 180mm × 180mm per fin (7.1\" × 7.1\")\u003c\/dd\u003e\n        \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003e2-piece design (left and right wings)\u003c\/dd\u003e\n        \u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003e1-year (Five Oceans model)\u003c\/dd\u003e\n        \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eMolded in two unbreakable pieces, each foil designed to flex independently to absorb shock\u003c\/dd\u003e\n    \u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003e1 x Hydrofoil Set (Left and Right Fin)\u003c\/li\u003e\n        \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e4 x Stainless Steel Screws\u003c\/span\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e4 x Washers\u003c\/span\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e4 x Pressure Nuts\u003c\/span\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n    \u003col\u003e\n        \u003cli\u003eCenter the hydrofoil pieces on the anti-ventilation (cavitation) plate of your outboard motor.\u003c\/li\u003e\n        \u003cli\u003eMark the positions for the four mounting holes. Ensure they are clear of any underlying structures.\u003c\/li\u003e\n        \u003cli\u003eCarefully drill the four marked holes through the plate using an appropriately sized drill bit.\u003c\/li\u003e\n        \u003cli\u003ePlace the fins onto the plate, aligning the holes.\u003c\/li\u003e\n        \u003cli\u003eInsert the stainless steel screws with washers from the top and secure them from the bottom using the pressure nuts.\u003c\/li\u003e\n        \u003cli\u003eTighten all four nuts evenly and securely. Do not overtighten. Check for firmness before operating the vessel.\u003c\/li\u003e\n    \u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eWill these fins fit my specific outboard motor?\u003c\/summary\u003e\n        \u003cp\u003eThese hydrofoils are designed for a universal fit on most outboard motors from 4 to 50 HP. Installation requires drilling into the anti-ventilation plate. Always measure your plate to ensure the 180mm x 180mm fin dimensions will fit comfortably.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eWhat performance benefits can I expect?\u003c\/summary\u003e\n        \u003cp\u003eHydrofoils can help reduce the time it takes to get on plane, maintain plane at lower speeds, and improve stability and tracking. Actual performance improvements vary depending on boat hull design, weight distribution, and engine mounting height.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eHow do these compare to the SE Sport 300?\u003c\/summary\u003e\n        \u003cp\u003eThese fins offer a similar function and universal fit for small-to-mid-size outboards. They are made from high-strength, UV-resistant plastic and feature a two-piece design that allows each wing to flex independently to absorb shock, similar to other popular models.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eHow often should I check the mounting hardware?\u003c\/summary\u003e\n        \u003cp\u003eIt is good practice to inspect the tightness of all mounting hardware (screws, nuts, washers) as part of your regular pre-launch checklist and at least once per season to ensure continued safe operation.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n        \u003cp\u003eThis listing is an aftermarket replacement (not OEM). It is built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, it is batch-inspected for consistency.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\n        \u003cp\u003eWe ship worldwide quickly—typical transit is 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\n        \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n    \u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n        \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n        \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717908140347,"sku":"19HS001R1","price":25.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/19HS001R1.png?v=1762938148"},{"product_id":"hydrofoil-stabilizer-fits-outboard-motors-8-40-hp-replaces-fo2002","title":"Hydrofoil Stabilizer – Fits Outboard Motors 8-40 HP (Replaces FO2002)","description":"\u003csection\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis compact \u003cstrong\u003eWhale Tail Hydrofoil Stabilizer\u003c\/strong\u003e is a performance-enhancing hydrofoil designed for small to mid-sized outboard motors and stern drives. It fits most outboards from 8–40 HP and can work with larger motors up to 300 HP, though some exceptions apply (notably certain Mercury 4-stroke models).\u003c\/p\u003e\n\u003cp\u003eThis part is a direct replacement for SeaSierra FO2002, UanofCn FO2002, and NorthBoat FO2002.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstalls via bolt-on mounting to the anti-ventilation plate (drilling is required).\u003c\/li\u003e\n\u003cli\u003eConstructed from durable, marine-grade reinforced PA66 nylon plastic.\u003c\/li\u003e\n\u003cli\u003eUV-resistant construction ensures a long service life in marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSeaSierra\u003c\/td\u003e\n        \u003ctd\u003eFO2002\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eUanofCn\u003c\/td\u003e\n        \u003ctd\u003eFO2002\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eNorthBoat\u003c\/td\u003e\n        \u003ctd\u003eFO2002\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eFits all Mercury models from 8-40 HP, with the exception of 4-Stroke models in the 40, 50, and 60 HP range.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eYamaha\u003c\/td\u003e\n        \u003ctd\u003eAll models\u003c\/td\u003e\n        \u003ctd\u003e8-40 HP\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003eAll models\u003c\/td\u003e\n        \u003ctd\u003e8-40 HP\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eExcept 4-Stroke 40, 50, 60 HP\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n        \u003ctd\u003eAll models\u003c\/td\u003e\n        \u003ctd\u003e8-40 HP\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eHonda\u003c\/td\u003e\n        \u003ctd\u003eAll models\u003c\/td\u003e\n        \u003ctd\u003e8-40 HP\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSuzuki\u003c\/td\u003e\n        \u003ctd\u003eAll models\u003c\/td\u003e\n        \u003ctd\u003e8-40 HP\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eTohatsu\u003c\/td\u003e\n        \u003ctd\u003eAll models\u003c\/td\u003e\n        \u003ctd\u003e8-40 HP\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003eOther models\u003c\/td\u003e\n        \u003ctd\u003eUp to 300 HP\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eExcept Mercury 4-Stroke 40, 50, 60 HP\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eWhale Tail Hydrofoil Stabilizer\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eBolt-on with included hardware (drilling required)\u003c\/dd\u003e\n  \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eAnti-Ventilation Plate Mount\u003c\/dd\u003e\n  \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eMarine Grade Reinforced Nylon PA66 Plastic\u003c\/dd\u003e\n  \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eAvailable in Blue, Red, Silver\u003c\/dd\u003e\n  \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e13.5\" × 14.0\" (343 × 355 mm)\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e3.24 lbs (1.47 kg)\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eDirect mount to anti-ventilation plate\u003c\/dd\u003e\n  \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eUV-resistant construction\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Hydrofoil Stabilizer (FO2002)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e4 x Sets\u003c\/span\u003e of Stainless Steel Screws and Nuts\u003c\/li\u003e\n  \u003cli\u003e1 x 6.5mm Drill Bit\u003c\/li\u003e\n  \u003cli\u003e1 x Installation Instruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003ePosition the hydrofoil on the anti-ventilation plate, ensuring it is centered and does not interfere with the propeller's movement.\u003c\/li\u003e\n  \u003cli\u003eMark the positions for the four mounting holes using the hydrofoil as a template.\u003c\/li\u003e\n  \u003cli\u003eCarefully drill the four marked holes through the anti-ventilation plate using the included 6.5mm drill bit.\u003c\/li\u003e\n  \u003cli\u003eSecure the hydrofoil to the plate by inserting the stainless steel screws from the top and tightening the nuts from below. Ensure a firm, snug fit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill this fit my 50 HP Mercury 4-Stroke?\u003c\/summary\u003e\n  \u003cp\u003eNo, this hydrofoil is not compatible with Mercury 4-Stroke motors of 40, 50, or 60 HP. It fits most other outboards from 8-40 HP and can work on some larger engines up to 300 HP. Always verify compatibility before purchasing.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes this require drilling into my engine?\u003c\/summary\u003e\n  \u003cp\u003eYes, installation requires drilling four holes into the anti-ventilation plate of your outboard motor. All necessary mounting hardware, including a drill bit, is included in the package to complete the process.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat performance benefits can I expect?\u003c\/summary\u003e\n  \u003cp\u003eA properly installed hydrofoil helps your boat get on plane faster, which can improve fuel efficiency. It also reduces or eliminates porpoising and cavitation while enhancing overall stability and handling at cruising speeds.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I maintain the hydrofoil?\u003c\/summary\u003e\n  \u003cp\u003eThe hydrofoil is made of UV-resistant, marine-grade plastic and requires minimal maintenance. Periodically check that the mounting bolts are secure and rinse the unit with fresh water after use in saltwater environments to prevent corrosion of the hardware.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). It is built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, it is batch-inspected for consistency and quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit is 5–15 days. Standard shipping is free; expedited options will appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\n  \u003cp\u003eThis product is covered by a 1-year warranty against manufacturing defects under normal use. If any issues arise, please contact our support team with your order details. Returns are accepted within our standard window for unused items in their original condition. See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or quality control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717908205883,"sku":"NB-20HS001 Silver","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/NB-20HS001Silver.png?v=1762947096"},{"product_id":"hydrofoil-stabilizer-fits-outboard-motors-8-40-hp-replaces-sport-200","title":"Hydrofoil Stabilizer – Fits Outboard Motors 8-40 HP (Replaces Sport 200)","description":"\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis \u003cstrong\u003eWhale Tail Hydrofoil Stabilizer\u003c\/strong\u003e is designed for outboard motors from 8 to 40 HP, with compatibility extending to many larger engines up to 300 HP. Its unique design improves boat performance by reducing bow rise, providing better stability, and increasing fuel efficiency.\u003c\/p\u003e\n  \u003cp\u003eThis part serves as a direct, aftermarket replacement for the Sport 200 style hydrofoil.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eBolt-on installation (drill bit and hardware included).\u003c\/li\u003e\n    \u003cli\u003eConstructed from UV-resistant, reinforced Nylon PA66 plastic.\u003c\/li\u003e\n    \u003cli\u003eCrescent-shaped surface enhances water flow and lift for faster planing.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eConfirm your engine model and horsepower range in the table below. This hydrofoil is not compatible with Mercury 4-stroke 40, 50, or 60 HP engines.\u003c\/p\u003e\n  \n  \u003cstyle\u003e\n    .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n    table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n    table.ss-table th, table.ss-table td {\n      padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n    }\n    table.ss-table th {\n      white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc;\n    }\n    @media (max-width:480px){\n      table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n    }\n  \u003c\/style\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Engine Model Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eModel\u003c\/th\u003e\n          \u003cth\u003eRated HP\u003c\/th\u003e\n          \u003cth\u003eStroke\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e8-40\u003c\/td\u003e\n          \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eWill fit most models\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e8-40\u003c\/td\u003e\n          \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eNot compatible with Mercury 4-stroke 40\/50\/60 HP\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e8-40\u003c\/td\u003e\n          \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eWill fit most models\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMultiple Brands\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003eUp to 300\u003c\/td\u003e\n          \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eExcepting Mercury 4-stroke 40\/50\/60 HP\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eHydrofoil Stabilizer (Whale Tail Style)\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eBolt-on (drill required, included)\u003c\/dd\u003e\n    \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eReinforced Nylon PA66 Plastic (UV-Resistant)\u003c\/dd\u003e\n    \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n    \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e13.5\" × 14\" (343 × 356 mm)\u003c\/dd\u003e\n    \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e1.36 kg (3 lbs)\u003c\/dd\u003e\n    \u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003e1 Year (manufacturer dependent)\u003c\/dd\u003e\n    \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eCrescent-shaped surface for improved water flow and lift\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\n  \u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x Hydrofoil Stabilizer (Sport 200 Style)\u003c\/li\u003e\n    \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e4 x Stainless Steel Mounting Screws (SS316)\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e1 x Drill Bit\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e1 x Installation Instructions\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eEnsure the engine is off and the boat is securely positioned out of the water.\u003c\/li\u003e\n    \u003cli\u003ePosition the hydrofoil onto the anti-cavitation plate of your outboard motor, centering it so it is flush.\u003c\/li\u003e\n    \u003cli\u003eMark the locations for the four mounting holes through the guides on the hydrofoil.\u003c\/li\u003e\n    \u003cli\u003eRemove the hydrofoil and carefully drill the four marked holes using the included drill bit.\u003c\/li\u003e\n    \u003cli\u003eAlign the hydrofoil with the newly drilled holes and secure it with the included mounting hardware.\u003c\/li\u003e\n    \u003cli\u003eCheck that the hydrofoil is tight and does not interfere with the propeller's full range of movement.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if this hydrofoil will fit my motor?\u003c\/summary\u003e\n    \u003cp\u003eThis hydrofoil is designed for most outboard motors between 8-40 HP. It also fits many larger engines up to 300 HP, with the specific exception of Mercury 4-stroke 40, 50, and 60 HP models. Always measure your anti-cavitation plate to ensure the 13.5\" x 14\" dimensions will fit without obstructing the propeller.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat performance benefits can I realistically expect?\u003c\/summary\u003e\n    \u003cp\u003eThe primary benefits include getting on plane faster at lower speeds, reducing bow rise for better visibility, minimizing porpoising and cavitation, and improving overall stability and handling. By staying on plane at lower RPMs, you can also see an improvement in fuel efficiency.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs drilling into my engine's cavitation plate required?\u003c\/summary\u003e\n    \u003cp\u003eYes, installation requires drilling four holes into the anti-cavitation plate. We include a drill bit and stainless steel mounting hardware to simplify the process. This bolt-on method provides a secure and permanent fit for optimal performance.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill this hydrofoil reduce my top speed?\u003c\/summary\u003e\n    \u003cp\u003eIn some cases, a hydrofoil may slightly reduce top-end speed by a few MPH due to increased drag. However, this is often offset by significant improvements in handling, stability, and low-speed planing that make the overall boating experience better for most users.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n    \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\n    \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\n    \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \n  \u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717908336955,"sku":"hgp6jC5Px72","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/hgp6jC5Px72.png?v=1762938155"},{"product_id":"140-f-thermostat-gasket-kit-fits-mercury-marine-8-35hp-replaces-8m0119207-855676002-855676005","title":"140°F Thermostat \u0026 Gasket Kit – Fits Mercury Marine 8-35HP (Replaces 8M0119207, 855676002, 855676005)","description":"\u003cstyle\u003e\n\/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n.ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n\/* Base table styles *\/\ntable.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\ntable.ss-table th, table.ss-table td {\npadding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n}\n\n\/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\ntable.ss-table th {\nwhite-space:nowrap; \/* Do not wrap *\/\nword-break:normal; \/* Don’t break words *\/\nletter-spacing:normal; \/* Prevent theme styles from stretching letters *\/\nfont-weight:600;\nbackground:#f8fafc;\n}\n\n\/* Small screen optimization *\/\n@media (max-width:480px){\ntable.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n}\n\u003c\/style\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003e140°F Thermostat \u0026amp; Gasket Kit\u003c\/strong\u003e is an essential component for maintaining optimal engine temperature in Mercury Marine 4-Stroke outboards from 8–35HP (2002–Present), including Carbureted, EFI, Jet, and SeaPro models. It ensures your engine operates within the correct temperature range, preventing overheating and improving performance.\u003c\/p\u003e\n\u003cp\u003eIt serves as a direct replacement for multiple OEM and aftermarket parts, including Mercury 8M0119207, 855676002, 855676005, Sierra 18-43175, and Nissan\/Tohatsu equivalents.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for direct OEM-replacement fitment.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel housing for durability in marine environments.\u003c\/li\u003e\n\u003cli\u003eKit includes thermostat, housing gasket, and rubber seal for a complete installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0119207\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e855676002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e855676005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-43175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\/Tohatsu\u003c\/td\u003e\n\u003ctd\u003e3NV010300M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003e3R3-01030-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003e3R3010300M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eFor Mercury Marine models, check your engine's serial number (S\/N) to ensure it falls within the specified range for a guaranteed fit. This thermostat fits a wide variety of 4-stroke models from 2002 to present.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eOEM Part No.\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–Up (S\/N 0P325500 \u0026amp; Up)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCYLINDER BLOCK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–Up (S\/N 0R042475 \u0026amp; Up)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCYLINDER BLOCK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e9.9\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–Up (S\/N 0R042475 \u0026amp; Up)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCYLINDER BLOCK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–Up (S\/N 0R575531 THRU 0R833819)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCYLINDER BLOCK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCarb 2CYL (S\/N 0R235949 THRU 0R833819)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-898103160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCarb 2CYL JCI (S\/N 0R558208 THRU 0R833819)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-898103160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSEAPRO (S\/N 0R051685 THRU 0R123564)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-895256005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSEAPRO (S\/N 0R123565 \u0026amp; Up)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-895256006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCarb (S\/N 0R235168 THRU 0R833819)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-898103160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSEAPRO (S\/N 0R051710 \u0026amp; Up)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-895257005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eEFI 3CYL (S\/N 0R106999 \u0026amp; Up - USA)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-898126006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eJet EFI 3CYL (S\/N 0R165086 \u0026amp; Up - USA)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-898126006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eEFI 3CYL (S\/N 0R106999 \u0026amp; Up - USA)\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eCat.# 90-898126006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eEFI\u003c\/td\u003e\n\u003ctd\u003e855676002\/8M0119207\u003c\/td\u003e\n\u003ctd\u003eVerified from multiple sources\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eEngine Thermostat with Gasket Kit\u003c\/dd\u003e\n\u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect OEM Replacement\u003c\/dd\u003e\n\u003cdt\u003eTemperature Rating\u003c\/dt\u003e\n\u003cdd\u003e60°C\/140°F\u003c\/dd\u003e\n\u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eMarine Outboard Engine Cooling System\u003c\/dd\u003e\n\u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eStainless Steel (Corrosion Resistant)\u003c\/dd\u003e\n\u003cdt\u003ePackage Includes\u003c\/dt\u003e\n\u003cdd\u003eThermostat, Gaskets, Rubber Seal\u003c\/dd\u003e\n\u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eSelf-cleaning design allows cooling system contaminants to flush through closing surfaces\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Thermostat (855676002\/8M0119207)\u003c\/li\u003e\n\u003cli\u003e1 x Thermostat Rubber Seal\u003c\/li\u003e\n\u003cli\u003e1 x Thermostat Housing Gasket (27-853702005\/27-898101194)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the engine is completely cool before starting. Disconnect the battery for safety.\u003c\/li\u003e\n\u003cli\u003eLocate the thermostat housing on the engine block. It is typically a small dome-shaped cover held by two or three bolts.\u003c\/li\u003e\n\u003cli\u003ePlace a catch pan underneath to collect any residual coolant that may spill.\u003c\/li\u003e\n\u003cli\u003eRemove the bolts securing the housing cover. You may need to gently tap the cover to break the gasket seal.\u003c\/li\u003e\n\u003cli\u003eNote the orientation of the old thermostat before removing it. Lift it out, followed by the old gasket and seal.\u003c\/li\u003e\n\u003cli\u003eClean both the housing and the cover surfaces thoroughly, removing all traces of the old gasket material.\u003c\/li\u003e\n\u003cli\u003eInstall the new gasket, thermostat, and rubber seal in the reverse order of removal. Ensure the thermostat is oriented correctly.\u003c\/li\u003e\n\u003cli\u003eReplace the housing cover and tighten the bolts to the manufacturer's recommended torque specification. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eReconnect the battery, start the engine, and check for any leaks around the housing as the engine warms up.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I know if my thermostat is failing?\u003c\/summary\u003e\u003cp\u003eCommon signs of a faulty thermostat include engine overheating alarms, the engine running colder than usual (not reaching operating temperature), or sudden fluctuations in the temperature gauge. A thermostat stuck open will prevent the engine from warming up, while one stuck closed will cause it to overheat.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this thermostat the correct temperature for my engine?\u003c\/summary\u003e\u003cp\u003eThis is a 140°F (60°C) thermostat. This rating is specified by the OEM for the listed Mercury engine models to ensure optimal performance, fuel efficiency, and engine longevity. Using a thermostat with a different temperature rating can negatively affect your engine.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I replace just the thermostat without the gaskets?\u003c\/summary\u003e\u003cp\u003eIt is strongly recommended to replace the gaskets and seals whenever the thermostat is replaced. Old gaskets can become brittle and may not seal properly when reassembled, leading to coolant leaks. This kit includes all necessary components for a complete and reliable installation.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the benefit of a \"self-cleaning\" design?\u003c\/summary\u003e\u003cp\u003eThe self-cleaning feature refers to small design elements that allow sediment, salt, and other contaminants in the cooling water to pass through the thermostat rather than getting trapped. This helps prevent the thermostat from sticking and ensures more reliable operation over time, especially in saltwater.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow often should an outboard thermostat be replaced?\u003c\/summary\u003e\u003cp\u003eThermostats don't have a strict replacement interval, but they are a common wear item. Many technicians recommend inspecting or replacing them every 2-3 years as part of routine cooling system maintenance, or immediately if you experience any symptoms of failure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat's the difference between an OEM and an aftermarket part?\u003c\/summary\u003e\u003cp\u003eThis listing is for an aftermarket replacement, not an original equipment manufacturer (OEM) part. It is built to OEM-level specifications with comparable materials in an ISO 9002 facility and is batch-inspected for consistency and quality.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are your shipping speeds and costs?\u003c\/summary\u003e\u003cp\u003eWe ship worldwide quickly, with a typical transit time of 5–15 days for most regions. Standard shipping is free. If available for your location, expedited shipping options and their costs will be presented at checkout.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the warranty and return policy?\u003c\/summary\u003e\u003cp\u003eThis part is covered by a 1-year warranty against manufacturing defects under normal marine use. If you encounter any issues, please contact our support team with your order details. Returns are accepted within our standard window for items that are unused and in their original condition. See our policy page or reach out for instructions.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVerify images and specifications against your original part before purchase. If anything differs—even if your model appears on a compatibility list—do not purchase.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement part, not an OEM component.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is highly recommended for safety and optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and rigorously tested for real-world conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — We offer free standard delivery to most regions with an average transit time of 5–15 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Our direct-sourcing model allows us to provide fair pricing without compromising on materials or quality control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717908369723,"sku":"8M0119207-QM","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/8M0119207-QM.png?v=1762938156"},{"product_id":"trim-tab-anode-fits-mercury-mariner-35-300-hp-outboards-mercruiser-alpha-bravo-drives-replaces-97-76214q5-97-76214t5","title":"Trim Tab Anode – Fits Mercury\/Mariner 35-300 HP Outboards \u0026 MerCruiser Alpha\/Bravo Drives (Replaces 97-76214Q5, 97-76214T5)","description":"\u003csection\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis flat plate \u003cstrong\u003eTrim Tab Anode – Fits Mercury\/Mariner 35-300 HP Outboards \u0026amp; MerCruiser Alpha\/Bravo Drives\u003c\/strong\u003e protects your engine from galvanic corrosion in fresh and saltwater. It is designed for a wide range of Mercury\/Mariner outboards (35–300 HP, 1995+), Force outboards (90 \u0026amp; 120 HP, 1995+), and MerCruiser Alpha One Gen 2 and Bravo series stern drives. The flat design provides extra clearance for high-rake propellers.\u003c\/p\u003e\n\u003cp\u003eIt serves as a direct replacement for Mercury\/Mercruiser part numbers 76214Q5, 97-76214Q5, 97-76214T5, and interchanges with Sierra 18-6016, Tecnoseal 00820, and others.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstalls directly with the included mounting bolt.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both freshwater and saltwater environments.\u003c\/li\u003e\n  \u003cli\u003eMade from high-purity, marine-grade zinc alloy for maximum protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury \/ MerCruiser\u003c\/td\u003e\n        \u003ctd\u003e76214Q5\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e97-76214Q5\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e97-76214T5\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e18-6016 \/ 18-6016A \/ 18-60161\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eCMP\u003c\/td\u003e\n        \u003ctd\u003eCM762145Z \/ CM762145A\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eTecnoseal\u003c\/td\u003e\n        \u003ctd\u003e00820 \/ 00820AL\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eGLM\u003c\/td\u003e\n        \u003ctd\u003e12710\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eFits various Mercury, Mariner, and Force outboards from 1995 and newer.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Mercury\/Mariner Outboards Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury \/ Mariner\u003c\/td\u003e\n        \u003ctd\u003eOutboard Motors\u003c\/td\u003e\n        \u003ctd\u003e35–300\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995 and newer\u003c\/td\u003e\n        \u003ctd\u003e97-76214Q5, 97-76214T5\u003c\/td\u003e\n        \u003ctd\u003eFits outboard trim tab cavity\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eForce\u003c\/td\u003e\n        \u003ctd\u003eOutboard Motors\u003c\/td\u003e\n        \u003ctd\u003e90, 120\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995 and newer\u003c\/td\u003e\n        \u003ctd\u003e97-76214Q5, 97-76214T5\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eAlso compatible with MerCruiser Alpha One and Bravo series stern drives.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"MerCruiser Stern Drives Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eAlpha One Gen 2\u003c\/td\u003e\n        \u003ctd\u003e97-76214Q5, 97-76214T5\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eBravo I, II, III\u003c\/td\u003e\n        \u003ctd\u003e97-76214Q5, 97-76214T5\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eBravo X, XR, XZ\u003c\/td\u003e\n        \u003ctd\u003e97-76214Q5, 97-76214T5\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eTrim Tab Anode\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eMarine Grade Zinc Alloy (QuickMarine model); Aluminum (OEM model)\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect bolt-on with included hardware\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eDirect bolt-on\u003c\/dd\u003e\n  \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eFlat plate design provides additional clearance for high rake propellers\u003c\/dd\u003e\n  \u003cdt\u003eOperating Environment\u003c\/dt\u003e\n\u003cdd\u003eFresh and saltwater\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e0.45 lb (0.20 kg)\u003c\/dd\u003e\n  \u003cdt\u003eColor\u003c\/dt\u003e\n\u003cdd\u003eSilver\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e1 x\u003c\/span\u003e Zinc Trim Tab Anode (76214Q5)\u003c\/li\u003e\n  \u003cli\u003e1 x Mounting Bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery or main power supply to the engine for safety.\u003c\/li\u003e\n  \u003cli\u003eLocate the old trim tab anode on the anti-ventilation plate of your outboard or stern drive.\u003c\/li\u003e\n  \u003cli\u003eUnscrew and remove the old anode and its mounting bolt. Retain the hardware if it is a different size.\u003c\/li\u003e\n  \u003cli\u003eThoroughly clean the mounting surface on the drive to ensure a good electrical connection. Remove any corrosion, paint, or buildup.\u003c\/li\u003e\n  \u003cli\u003ePosition the new trim tab anode and insert the included mounting bolt.\u003c\/li\u003e\n  \u003cli\u003eTighten the bolt securely according to your engine manufacturer's torque specifications. Do not over-tighten.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I know if this anode fits my engine?\u003c\/summary\u003e\n  \u003cp\u003eThis anode fits a wide range of Mercury\/Mariner outboards (35-300 HP, 1995+), Force outboards (90\/120 HP, 1995+), and MerCruiser Alpha\/Bravo drives. The best way to confirm is by matching the OEM part number (e.g., 97-76214Q5, 97-76214T5) from your service manual to the numbers in our Part Number Matrix.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat’s the difference between zinc and aluminum anodes?\u003c\/summary\u003e\n  \u003cp\u003eZinc anodes, like this one, are traditionally used for saltwater applications. Aluminum anodes are formulated for saltwater and brackish water, and are the standard for modern Mercury\/MerCruiser engines. This zinc alloy part provides reliable protection in both fresh and salt water.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow often should I replace my trim tab anode?\u003c\/summary\u003e\n  \u003cp\u003eInspect your anodes at least once a year or every 100 hours of operation. You should replace them when they are 50% corroded or consumed. Replacement frequency depends on water salinity, temperature, and electrical currents in your marina.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are the signs of a worn-out anode?\u003c\/summary\u003e\n  \u003cp\u003eA worn-out anode will appear heavily pitted, physically smaller, and may have a chalky white coating. If the anode is gone or mostly eroded, your engine's other metal components are at risk of galvanic corrosion damage.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhy is a flat anode plate better for some setups?\u003c\/summary\u003e\n  \u003cp\u003eThis flat plate design offers increased clearance compared to standard or finned anodes. This is particularly beneficial for boats equipped with high-rake propellers, as it helps prevent the propeller blades from striking the anode during operation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I install this trim tab anode myself?\u003c\/summary\u003e\n  \u003cp\u003eYes, this is a straightforward DIY task for most boat owners. It involves removing one bolt, cleaning the mounting surface, and securing the new anode. However, if you are unsure, professional installation is always recommended.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost?\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns?\u003c\/summary\u003e\n  \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717909778747,"sku":"QM-24ZA498","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/QM-24ZA498.png?v=1762938199"},{"product_id":"propeller-shaft-oil-seal-fits-mercury-mariner-30-125-hp-replaces-26-70081","title":"Propeller Shaft Oil Seal – Fits Mercury\/Mariner 30-125 HP (Replaces 26-70081)","description":"\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis aftermarket \u003cstrong\u003ePropeller Shaft Oil Seal\u003c\/strong\u003e is designed for a wide range of Mercury and Mariner outboard lower units, covering models from 30 HP to 125 HP manufactured between 1978 and the present. It serves as a crucial component in the gearcase to prevent water from entering and to retain gear oil, ensuring the longevity and performance of your engine's drivetrain.\u003c\/p\u003e\n  \u003cp\u003eIt is a direct replacement for Mercury part 26-70081 and interchanges with other aftermarket numbers including Sierra 18-2053, GLM 85530, Quicksilver 26-70081, and UAN Marine 91255-zw1-003.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eInstalls via press fit into the lower unit gearcase.\u003c\/li\u003e\n    \u003cli\u003eConstructed from durable Nitrile Rubber (NBR) for a reliable seal.\u003c\/li\u003e\n    \u003cli\u003ePrevents water intrusion and retains essential gear oil.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n  \u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket brands.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003ePart Number\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSierra\u003c\/td\u003e\n          \u003ctd\u003e18-2053\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGLM\u003c\/td\u003e\n          \u003ctd\u003e85530\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eQuicksilver\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eUAN Marine\u003c\/td\u003e\n          \u003ctd\u003e91255-zw1-003\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n  \u003cp\u003eFor Mercury and Mariner models, this seal fits a broad variety of 2-stroke and 4-stroke engines from 30 to 125 HP. Verify your specific model and year range for an exact match.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Mercury\/Mariner Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eModel\u003c\/th\u003e\n          \u003cth\u003eRated HP\u003c\/th\u003e\n          \u003cth\u003eStroke\u003c\/th\u003e\n          \u003cth\u003eYears\u003c\/th\u003e\n          \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e30 HP\u003c\/td\u003e\n          \u003ctd\u003e30\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1979–1997\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e35 HP\u003c\/td\u003e\n          \u003ctd\u003e35\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1984–1989\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e40 HP\u003c\/td\u003e\n          \u003ctd\u003e40\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1978–1997\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e45 HP\u003c\/td\u003e\n          \u003ctd\u003e45\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1986–1989\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e50 HP\u003c\/td\u003e\n          \u003ctd\u003e50\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1978–1997\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e60 HP\u003c\/td\u003e\n          \u003ctd\u003e60\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1979–1991\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e65 HP\u003c\/td\u003e\n          \u003ctd\u003e65\u003c\/td\u003e\n          \u003ctd\u003e3-cyl\u003c\/td\u003e\n          \u003ctd\u003e1979–1985\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e70 HP\u003c\/td\u003e\n          \u003ctd\u003e70\u003c\/td\u003e\n          \u003ctd\u003e3-cyl\u003c\/td\u003e\n          \u003ctd\u003e1979–1985\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e75 HP\u003c\/td\u003e\n          \u003ctd\u003e75\u003c\/td\u003e\n          \u003ctd\u003e3-cyl\u003c\/td\u003e\n          \u003ctd\u003e1978–1997\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e80 HP\u003c\/td\u003e\n          \u003ctd\u003e80\u003c\/td\u003e\n          \u003ctd\u003e3-cyl\u003c\/td\u003e\n          \u003ctd\u003e1978–1989\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e90 HP\u003c\/td\u003e\n          \u003ctd\u003e90\u003c\/td\u003e\n          \u003ctd\u003e3-cyl\u003c\/td\u003e\n          \u003ctd\u003e1978–1997\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e100 HP\u003c\/td\u003e\n          \u003ctd\u003e100\u003c\/td\u003e\n          \u003ctd\u003e4-cyl\u003c\/td\u003e\n          \u003ctd\u003e1978–1990\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e115 HP\u003c\/td\u003e\n          \u003ctd\u003e115\u003c\/td\u003e\n          \u003ctd\u003e4-cyl\u003c\/td\u003e\n          \u003ctd\u003e1978–1997\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e125 HP\u003c\/td\u003e\n          \u003ctd\u003e125\u003c\/td\u003e\n          \u003ctd\u003e4-cyl\u003c\/td\u003e\n          \u003ctd\u003e1978–1997\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eForce\u003c\/td\u003e\n          \u003ctd\u003e75-120 HP\u003c\/td\u003e\n          \u003ctd\u003e75-120\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1989-1999\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n  \u003cp\u003eAlso compatible with select Force by Mercury Marine outboards from the late 1990s.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Force Outboards Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eModel\u003c\/th\u003e\n          \u003cth\u003eRated HP\u003c\/th\u003e\n          \u003cth\u003eStroke\u003c\/th\u003e\n          \u003cth\u003eYears\u003c\/th\u003e\n          \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eForce\u003c\/td\u003e\n          \u003ctd\u003e75\u003c\/td\u003e\n          \u003ctd\u003e75\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1999\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eForce\u003c\/td\u003e\n          \u003ctd\u003e90\u003c\/td\u003e\n          \u003ctd\u003e90\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1995–1999\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eForce\u003c\/td\u003e\n          \u003ctd\u003e120\u003c\/td\u003e\n          \u003ctd\u003e120\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke\u003c\/td\u003e\n          \u003ctd\u003e1995–1999\u003c\/td\u003e\n          \u003ctd\u003e26-70081\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003ePropeller Shaft Oil Seal\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eLower Unit \/ Gearcase\u003c\/dd\u003e\n    \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003ePress Fit\u003c\/dd\u003e\n    \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eNitrile Rubber (NBR)\u003c\/dd\u003e\n    \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n    \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003eInner Diameter: 30.2 mm (1.188 in), Outer Diameter: 43 mm (1.689 in), Width: 6.3 mm (0.247 in)\u003c\/dd\u003e\n    \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003ePress Fit\u003c\/dd\u003e\n    \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003ePrevents water intrusion and retains gear oil in lower unit\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x Propeller Shaft Oil Seal (26-70081)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003ePosition the lower unit securely on a workbench. Place a drain pan underneath the gearcase.\u003c\/li\u003e\n    \u003cli\u003eRemove the lower drain screw to empty the gear oil completely. Inspect the oil for any milky appearance, indicating water intrusion.\u003c\/li\u003e\n    \u003cli\u003eRemove the propeller assembly, including the propeller nut, thrust washer, and any spacers.\u003c\/li\u003e\n    \u003cli\u003eCarefully pry out the old propeller shaft oil seal using a seal puller or a flat screwdriver. Be cautious not to scratch or gouge the housing.\u003c\/li\u003e\n    \u003cli\u003eThoroughly clean the seal housing area to remove any old sealant, corrosion, or debris.\u003c\/li\u003e\n    \u003cli\u003eApply a thin layer of marine grease or a suitable sealant to the outer edge of the new oil seal.\u003c\/li\u003e\n    \u003cli\u003eGently press the new seal into place using a socket or seal driver that matches the outer diameter of the seal. Ensure it is seated evenly and fully.\u003c\/li\u003e\n    \u003cli\u003eLubricate the propeller shaft and the inner lip of the new seal with marine grease.\u003c\/li\u003e\n    \u003cli\u003eReinstall the propeller assembly, ensuring all spacers and washers are in the correct order. Torque the propeller nut to the manufacturer's specification.\u003c\/li\u003e\n    \u003cli\u003eRefill the lower unit with the recommended gear oil through the bottom drain hole until it seeps out of the upper vent hole, then replace and tighten both screws.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I know if this oil seal will fit my specific engine model?\u003c\/summary\u003e\n    \u003cp\u003eThis seal is designed for a wide range of Mercury\/Mariner (30-125 HP) and Force (75-120 HP) outboards. The best way to confirm is to check the compatibility tables on this page against your engine's model, horsepower, and year. Cross-referencing your old part number with the ones listed in our Part Number Matrix is also a reliable method.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the signs of a failing propeller shaft oil seal?\u003c\/summary\u003e\n    \u003cp\u003eThe most common sign is a milky or creamy appearance in your gear lube, which indicates water has mixed with the oil. You may also notice an oil leak around the propeller shaft area or find fishing line tangled behind the propeller, which can damage the seal and cause it to fail.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow often should I replace my lower unit seals?\u003c\/summary\u003e\n    \u003cp\u003eThere is no fixed replacement interval, but it's good practice to inspect your gear lube annually. It's recommended to replace the seals whenever you perform major service on the lower unit, if you notice any signs of a leak, or if the boat is used heavily in saltwater or commercial applications.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I reuse this seal if I remove the propeller shaft for other maintenance?\u003c\/summary\u003e\n    \u003cp\u003eNo. Oil seals are designed for a single installation. Once removed, they can become stretched or damaged, and will not provide a reliable seal if reinstalled. Always use a new seal during reassembly to prevent leaks.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n    \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\n    \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\n    \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003ePro-Grade Standards — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n    \u003cli\u003eFast Global Fulfillment — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n    \u003cli\u003eManufacturer-Direct Value — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50717913514299,"sku":"24PSK634R2","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/24PSK634R2.png?v=1762938289"},{"product_id":"lower-unit-gear-lube-oil-pump-fits-mercury-outboard-yamaha-honda-mercruiser-sterndrives-replaces-26-830749-8m0204693","title":"Lower Unit Gear Lube Oil Pump – Fits Mercury Outboard, Yamaha, Honda \u0026 MerCruiser Sterndrives (Replaces 26-830749, 8M0204693)","description":"\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eLower Unit Gear Lube Oil Pump\u003c\/strong\u003e is designed for easy gear oil changes on a variety of marine engines. It is compatible with most Mercury outboards, MerCruiser sterndrives, and many models from Yamaha, Honda, and Suzuki that use a standard quart bottle with a 28mm opening.\u003c\/p\u003e\n\u003cp\u003eIt serves as a direct replacement for Mercury OEM part numbers including 26-830749 and 8M0204693.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManual hand pump for controlled fluid transfer, delivering approximately 8cc per stroke.\u003c\/li\u003e\n\u003cli\u003eFits standard quart gear lube bottles with a 28mm threaded opening.\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/8\", 8mm, and 10mm metal adapters to fit various lower unit drain\/fill plugs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e26-830749\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e8M0204693\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e830749\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eThis pump is designed for broad use with most Mercury outboards and MerCruiser sterndrives. It is also suitable for many Yamaha, Honda, and Suzuki models, though specific model-year data is not available. This kit is not compatible with Volvo Penta lower units.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003eF30-F400 Series\u003c\/td\u003e\n        \u003ctd\u003e30-400\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e26-830749, 8M0204693\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003eD75-D300 Series\u003c\/td\u003e\n        \u003ctd\u003e75-300\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003e26-830749, 8M0204693\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003eE150-E250 Series\u003c\/td\u003e\n        \u003ctd\u003e150-250\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003e26-830749, 8M0204693\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eMultiple Sterndrive Models\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n        \u003ctd\u003e26-830749, 8M0204693\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eLower Unit Gear Lube Oil Pump\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eManual hand pump\u003c\/dd\u003e\n  \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eFits standard quart bottles with 28mm opening\u003c\/dd\u003e\n  \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003ePlastic with aluminum adapters\u003c\/dd\u003e\n  \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eWhite\/clear with metal adapters\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003eApprox. 113-150g (4-5.3 oz)\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003e3\/8\" swivel, 8mm and 10mm metal adapters\u003c\/dd\u003e\n  \u003cdt\u003eThread Size\u003c\/dt\u003e\n\u003cdd\u003e3\/8\", 8mm, 10mm\u003c\/dd\u003e\n  \u003cdt\u003eOutput\u003c\/dt\u003e\n\u003cdd\u003e8cc per pump stroke for some models\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Lower Unit Gear Lube Oil Pump Assembly\u003c\/li\u003e\n  \u003cli\u003e1 x 3\/8\" Swivel Adapter\u003c\/li\u003e\n  \u003cli\u003e1 x 8mm Metal Adapter\u003c\/li\u003e\n  \u003cli\u003e1 x 10mm Metal Adapter\u003c\/li\u003e\n  \u003cli\u003e2 x Rigid Suction Tubes (13cm, 15cm)\u003c\/li\u003e\n  \u003cli\u003e1 x Cap Adapter (for 28mm bottle opening)\u003c\/li\u003e\n  \u003cli\u003e1 x Flexible Clear Fill Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e2 x Drain Gasket\u003c\/span\u003e (for Mercury\/Mercruiser models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003ePlace a suitable drain pan under the lower unit of your engine.\u003c\/li\u003e\n  \u003cli\u003eRemove both the lower drain\/fill screw and the upper vent screw from the gearcase assembly.\u003c\/li\u003e\n  \u003cli\u003eAllow all of the old gear oil to drain completely. Inspect the old oil for any metal shavings or milky appearance.\u003c\/li\u003e\n  \u003cli\u003eScrew the appropriate adapter (3\/8\", 8mm, or 10mm) snugly into the lower drain hole.\u003c\/li\u003e\n  \u003cli\u003eAttach the pump assembly to a fresh bottle of manufacturer-recommended lower unit gear lubricant.\u003c\/li\u003e\n  \u003cli\u003eConnect the pump's flexible fill tube to the adapter installed in the gearcase.\u003c\/li\u003e\n  \u003cli\u003ePump the new lubricant into the lower unit until a steady stream of new oil flows out from the upper vent hole.\u003c\/li\u003e\n  \u003cli\u003eKeep pressure on the pump and reinstall the upper vent screw to create a vacuum seal.\u003c\/li\u003e\n  \u003cli\u003eQuickly remove the fill tube and adapter from the bottom hole and reinstall the lower drain\/fill screw.\u003c\/li\u003e\n  \u003cli\u003eTighten both screws to the manufacturer’s specified torque. Do not overtighten.\u003c\/li\u003e\n  \u003cli\u003eClean any excess lubricant from the gearcase exterior and dispose of the old oil properly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWill this pump fit my specific engine?\u003c\/summary\u003e\n  \u003cp\u003eThis pump is designed for broad compatibility with Mercury, MerCruiser, Yamaha, Honda, and Suzuki lower units. It includes 3\/8\", 8mm, and 10mm adapters to fit the most common drain plug sizes. Please verify your engine's drain plug size before purchase. Note: It is not compatible with Volvo Penta models.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I know which adapter to use?\u003c\/summary\u003e\n  \u003cp\u003eThe kit includes multiple adapters to fit common drain plug threads. Gently test-fit the adapters by hand into your lower unit's drain plug opening to find the correct size before attaching the pump assembly.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eThe pump isn't drawing oil from the bottle. What's wrong?\u003c\/summary\u003e\n  \u003cp\u003eFirst, ensure the suction tube is securely attached and fully submerged in the gear oil. Check that the pump's cap is screwed tightly onto the quart bottle to create a proper seal, as any air leak will prevent it from priming. Finally, confirm there are no cracks in the pump housing or tubes.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat is the difference between this pump and an OEM version?\u003c\/summary\u003e\n  \u003cp\u003eThis aftermarket pump is engineered to meet or exceed OEM specifications for fit, function, and material quality but is offered at a more accessible price. It is built for reliable performance and includes multiple adapters for wide utility across different brands.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow much oil does this pump move per stroke?\u003c\/summary\u003e\n  \u003cp\u003eThis pump is rated to deliver approximately 8 cubic centimeters (cc) of fluid per full, steady stroke. This allows for controlled and efficient filling without creating air pockets.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan this pump be used for other fluids like engine oil?\u003c\/summary\u003e\n  \u003cp\u003eThis pump is specifically designed for filling lower unit gearcases with marine-grade gear lubricant, which is typically a high-viscosity oil. It is not recommended for use with engine oil, gasoline, solvents, or other volatile chemicals.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost?\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns?\u003c\/summary\u003e\n  \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718235164987,"sku":"24OP149-XR","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/24OP149-XR.png?v=1762958039"},{"product_id":"lower-unit-gear-lube-oil-pump-fits-mercury-mercruiser-yamaha-honda-suzuki-replaces-multiple-oem-adaptors","title":"Lower Unit Gear Lube Oil Pump – Fits Mercury\/Mercruiser, Yamaha, Honda, Suzuki (Replaces Multiple OEM Adaptors)","description":"\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis \u003cstrong\u003eMarine Lower Unit Gear Lube Oil Pump\u003c\/strong\u003e is designed to cleanly and efficiently transfer gear oil into the lower units of most outboard motors and stern drives. The pump fits directly onto standard quart bottles with 28mm caps and comes with a set of interchangeable adapters for broad compatibility with major marine engine brands.\u003c\/p\u003e\n  \u003cp\u003eThe included adapters allow this single pump to replace multiple OEM-specific tools, providing equivalents for Mercury\/Mercruiser (3\/8\"-16), Yamaha, Honda, Suzuki, and other foreign outboards (8mm\/10mm).\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eFeatures a simple, manual hand-pump operation with a delivery volume of 8-10cc per stroke for precise filling.\u003c\/li\u003e\n    \u003cli\u003eIncludes three metal fill port adapters and two suction tube sizes to fit different bottle heights and engine types.\u003c\/li\u003e\n    \u003cli\u003eEngineered for use with gear oil only.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n  \u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003ePart Number\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury \/ Mercruiser\u003c\/td\u003e\n          \u003ctd\u003e830749\u003c\/td\u003e\n          \u003ctd\u003eGasket part number\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury \/ Mercruiser\u003c\/td\u003e\n          \u003ctd\u003e8M0204693\u003c\/td\u003e\n          \u003ctd\u003eAdapter part number reference\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n  \u003cp\u003eThis pump fits most Mercury, Mercruiser, and other US-made outboards or sterndrives using the included 3\/8\"-16 swivel adapter. Some Johnson\/Evinrude models may require a different adapter.\u003c\/p\u003e\n  \u003cp\u003eIt is also compatible with most foreign outboard models from brands like Yamaha, Honda, Suzuki, Nissan, and Tohatsu using the 8mm or 10mm threaded adapters.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Engine \u0026amp; Model Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eModel\u003c\/th\u003e\n          \u003cth\u003eRated HP\u003c\/th\u003e\n          \u003cth\u003eStroke\u003c\/th\u003e\n          \u003cth\u003eOEM Part No.\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003eF30-F400 Series\u003c\/td\u003e\n          \u003ctd\u003e30-400\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e830749, 8M0204693\u003c\/td\u003e\n          \u003ctd\u003e3\/8\" adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003eD75-D300 Series\u003c\/td\u003e\n          \u003ctd\u003e75-300\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e830749, 8M0204693\u003c\/td\u003e\n          \u003ctd\u003e3\/8\" adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003eE150-E250 Series\u003c\/td\u003e\n          \u003ctd\u003e150-250\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e830749, 8M0204693\u003c\/td\u003e\n          \u003ctd\u003e3\/8\" adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercruiser\u003c\/td\u003e\n          \u003ctd\u003eAlpha\/Bravo Sterndrives\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e830749, 8M0204693\u003c\/td\u003e\n          \u003ctd\u003e3\/8\" adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n         \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003eMost outboards\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e2 \u0026amp; 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e8mm or 10mm adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHonda\u003c\/td\u003e\n          \u003ctd\u003eMost outboards\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e8mm or 10mm adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSuzuki\u003c\/td\u003e\n          \u003ctd\u003eMost outboards\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e8mm or 10mm adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eNissan\/Tohatsu\u003c\/td\u003e\n          \u003ctd\u003eMost outboards\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e2 \u0026amp; 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003e8mm or 10mm adaptor\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n          \u003ctd\u003eMany models\u003c\/td\u003e\n          \u003ctd\u003eVarious\u003c\/td\u003e\n          \u003ctd\u003e2 \u0026amp; 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003e\u003c\/td\u003e\n          \u003ctd\u003eSpecific applications need verification\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n  \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This pump is not compatible with Volvo Penta sterndrives.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eLower Unit Gear Oil Transfer Pump\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eManual hand pump\u003c\/dd\u003e\n    \u003cdt\u003ePump Capacity\u003c\/dt\u003e\n\u003cdd\u003e8-10cc per pump stroke\u003c\/dd\u003e\n    \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003e28mm bottle cap adaptor with interchangeable fill port adaptors\u003c\/dd\u003e\n    \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eMultiple adaptors: 3\/8\" swivel, 8mm, 10mm\u003c\/dd\u003e\n    \u003cdt\u003eThread Size\u003c\/dt\u003e\n\u003cdd\u003e3\/8\"-16 (US outboards), 8mm-1.25, 10mm-1.25 (foreign outboards)\u003c\/dd\u003e\n    \u003cdt\u003eHose Length\u003c\/dt\u003e\n\u003cdd\u003e~19.5 inch (495 mm)\u003c\/dd\u003e\n    \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e~4 ounces (113 g)\u003c\/dd\u003e\n    \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eHigh-quality plastic, rubber, steel and aluminum alloy components\u003c\/dd\u003e\n    \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\/Grey\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x Fluid Pump with 28mm Bottle Cap Adaptor\u003c\/li\u003e\n    \u003cli\u003e1 x 3\/8\" Swivel Adapter\u003c\/li\u003e\n    \u003cli\u003e1 x 8mm Metal Adapter (8mm-1.25 male x 3\/8\"-16 female)\u003c\/li\u003e\n    \u003cli\u003e1 x 10mm Metal Adapter (10mm-1.25 male x 3\/8\"-16 female)\u003c\/li\u003e\n    \u003cli\u003e2 x Rigid Suction Tubes (13cm, 15cm)\u003c\/li\u003e\n    \u003cli\u003e1 x Flexible Clear Fill Tube (19.5 inch\/495mm)\u003c\/li\u003e\n    \u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e2 x Oil Drain Plug Gaskets (for Mercury outboards, 830749)\u003c\/span\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eSelect the correct rigid suction tube for your gear lube bottle and attach it firmly to the pump base.\u003c\/li\u003e\n    \u003cli\u003eScrew the pump securely onto the standard quart gear lube bottle (28mm cap).\u003c\/li\u003e\n    \u003cli\u003eChoose the appropriate adapter for your engine's lower unit: 3\/8\" for Mercury\/Mercruiser, or 8mm\/10mm for most foreign brands.\u003c\/li\u003e\n    \u003cli\u003eAttach the adapter to the flexible clear fill tube.\u003c\/li\u003e\n    \u003cli\u003ePosition a drain pan under the lower unit and remove both the upper vent and lower fill screws.\u003c\/li\u003e\n    \u003cli\u003eAllow all old gear oil to drain completely.\u003c\/li\u003e\n    \u003cli\u003eInsert the fill tube with adapter into the lower drain screw hole.\u003c\/li\u003e\n    \u003cli\u003ePump new lube into the gear case until fluid begins to flow out of the upper vent hole, which indicates it is full.\u003c\/li\u003e\n    \u003cli\u003eRe-install the upper vent screw plug first.\u003c\/li\u003e\n    \u003cli\u003eQuickly remove the fill tube and re-install the lower drain screw plug.\u003c\/li\u003e\n    \u003cli\u003eTighten both plugs to the manufacturer's specified torque and wipe the area clean. Check for leaks after a short period.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich adapter do I use for my engine?\u003c\/summary\u003e\n    \u003cp\u003eUse the 3\/8\"-16 swivel adapter for most Mercury, Mercruiser, and other US-made outboards. Use the 8mm or 10mm adapters for most Yamaha, Honda, Suzuki, Nissan, and Tohatsu models. Always check your engine's fill plug thread size to confirm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this pump compatible with Volvo Penta sterndrives?\u003c\/summary\u003e\n    \u003cp\u003eNo, this pump kit is generally not compatible with Volvo Penta sterndrives, which often require a different type of adapter not included in this kit.\u003c\/p\u003e\n  \u003c\/details\u003e\n    \u003cdetails\u003e\n    \u003csummary\u003eThe pump isn't drawing oil from the bottle. What's wrong?\u003c\/summary\u003e\n    \u003cp\u003eEnsure the suction tube is firmly attached and reaches the bottom of the bottle. Check that the pump is screwed tightly onto the bottle to create a proper seal. Also, make sure all connections, including the hose and adapters, are secure and hand-tightened.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the included gaskets for?\u003c\/summary\u003e\n    \u003cp\u003eThe kit includes two oil drain plug gaskets specifically for Mercury and Mercruiser outboards (replaces OEM part 830749), providing a fresh seal for your gear lube change.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much fluid is transferred with each pump?\u003c\/summary\u003e\n    \u003cp\u003eThe pump delivers approximately 8-10cc of fluid per full stroke, allowing for controlled and efficient filling without waste.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n    \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eShipping speed \u0026amp; cost?\u003c\/summary\u003e\n    \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWarranty \u0026amp; returns?\u003c\/summary\u003e\n    \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003ePro-Grade Standards — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n    \u003cli\u003eFast Global Fulfillment — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n    \u003cli\u003eManufacturer-Direct Value — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718235197755,"sku":"QIhG4540uDj","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/QIhG4540uDj.png?v=1762958041"},{"product_id":"aluminum-trim-tab-anode-fits-mercury-mariner-outboard-35-hp-mercruiser-stern-drives-replaces-822777q1-822777a1","title":"Aluminum Trim Tab Anode – Fits Mercury\/Mariner Outboard 35+ HP \u0026 MerCruiser Stern Drives (Replaces 822777Q1, 822777A1)","description":"\u003csection\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis high-quality \u003cstrong\u003eAluminum Trim Tab Anode\u003c\/strong\u003e is designed for a wide range of Mercury\/Mariner outboards (35 HP and above, from 1995 and up), Force outboards (90HP and 120HP, 1995+), and all MerCruiser stern drives. It provides essential galvanic corrosion protection for your engine's underwater components while also serving as a trim tab to counteract propeller torque.\u003c\/p\u003e\n\u003cp\u003eIt serves as a direct interchange for Mercury part numbers 822777A1 and 822777Q1, MerCruiser 46399A1, and aftermarket equivalents including Sierra 18-6014 and GLM 12680.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Simple bolt-on process with the included mounting bolt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Formulated from a premium aluminum alloy for use in both fresh water and salt water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Provides dual-purpose corrosion protection and hydrodynamic trim force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e822777A1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e46399A2\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e18-6014\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eGLM\u003c\/td\u003e\n        \u003ctd\u003e12680\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eTecnoseal\u003c\/td\u003e\n        \u003ctd\u003e00804AL\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor Mercury\/Mariner \u0026amp; Force Outboards:\u003c\/strong\u003e Fits most standard models 35HP and up from 1995, including specific 225HP CARB, Marathon, and SeaPro series.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Mercury\/Mariner \u0026amp; Force Outboard Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e225 (3.0L CARB)\u003c\/td\u003e\n        \u003ctd\u003e225\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995–2004\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n        \u003ctd\u003eSerial #0D280813 - 0G760299\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e225 MARATHON (3.0L CARB)\u003c\/td\u003e\n        \u003ctd\u003e225\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995–2004\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n        \u003ctd\u003eSerial #0G245605 - 0G760299\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e225 SEAPRO (3.0L CARB)\u003c\/td\u003e\n        \u003ctd\u003e225\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995–2004\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n        \u003ctd\u003eSerial #0G245605 - 0G760299\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n        \u003ctd\u003eStandard Models\u003c\/td\u003e\n        \u003ctd\u003e35-300\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995 and up\u003c\/td\u003e\n        \u003ctd\u003e822777A1\/822777Q1\u003c\/td\u003e\n        \u003ctd\u003eFits most 35HP \u0026amp; above models\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eForce\u003c\/td\u003e\n        \u003ctd\u003eStandard Models\u003c\/td\u003e\n        \u003ctd\u003e90, 120\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995 and up\u003c\/td\u003e\n        \u003ctd\u003e822777A1\/822777Q1\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor MerCruiser Stern Drives:\u003c\/strong\u003e Compatible with all Alpha One, SSM series, and other sterndrive models, especially when using high-rake propellers.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"MerCruiser Stern Drive Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eAlpha One\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eSSM II\/III\/IV\/V\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eALPHA ONE SS\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1982–1989\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n        \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eAll Sterndrives\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n        \u003ctd\u003eUsing high rake propellers\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eTrim Tab Anode\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eBolt-on\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eAluminum Alloy\u003c\/dd\u003e\n  \u003cdt\u003eColor\u003c\/dt\u003e\n\u003cdd\u003eSilver\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e0.38 kg (0.84 lb)\u003c\/dd\u003e\n  \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eDirect bolt-on with included bolt\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eMarine outboard and stern drive engines\u003c\/dd\u003e\n  \u003cdt\u003eOperating Environment\u003c\/dt\u003e\n\u003cdd\u003eFresh water and salt water\u003c\/dd\u003e\n  \u003cdt\u003eEngine Type Compatibility\u003c\/dt\u003e\n\u003cdd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/dd\u003e\n  \u003cdt\u003eFunction\u003c\/dt\u003e\n\u003cdd\u003eCorrosion protection and hydrodynamic trim force\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e1 x\u003c\/span\u003e Aluminum Trim Tab Anode (Replaces 822777Q1\/822777A1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e1 x\u003c\/span\u003e Mounting Bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect the negative battery cable before beginning work.\u003c\/li\u003e\n\u003cli\u003eLocate and unbolt the old trim tab anode from the underside of the anti-ventilation plate.\u003c\/li\u003e\n\u003cli\u003eThoroughly clean the mounting surface on the gearcase. A clean, bare metal contact area is essential for proper conductivity. Do not paint the anode or the mounting surface.\u003c\/li\u003e\n\u003cli\u003ePosition the new anode and install the included mounting bolt.\u003c\/li\u003e\n\u003cli\u003eTighten the bolt to the engine manufacturer's recommended torque specification. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eReconnect the negative battery cable.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I know if this anode will fit my engine?\u003c\/summary\u003e\n  \u003cp\u003eFirst, compare your old part to our images and specs. Second, check the compatibility tables provided for your engine's make, model, and year. Finally, you can cross-reference your existing part number with those in the Part Number Matrix to ensure it is a direct equivalent.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat is the 'trim tab' function for?\u003c\/summary\u003e\n  \u003cp\u003eBesides protecting against corrosion, the tab acts as a small rudder to counteract propeller torque steer. This helps the boat track straight without requiring constant steering wheel correction. You may need to adjust its angle slightly for optimal handling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I use this aluminum anode in salt water?\u003c\/summary\u003e\n  \u003cp\u003eYes. This modern aluminum alloy anode is specifically designed for excellent performance in all water types—salt, brackish, and fresh. It offers broader, more effective protection compared to traditional zinc anodes, which are only suitable for salt water.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow often should I replace my trim tab anode?\u003c\/summary\u003e\n  \u003cp\u003eInspect your anodes at least once a year or every 50-100 hours of operation. You must replace the anode when it is approximately 50-60% eroded to maintain continuous galvanic protection for your engine.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are the signs of a failing or depleted anode?\u003c\/summary\u003e\n  \u003cp\u003eVisible signs include rapid or uneven corrosion, significant pitting, or the anode being almost completely gone. Functionally, you may notice new corrosion or paint blistering on other underwater metal components like your gearcase or propeller.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhy is it important to use the new bolt?\u003c\/summary\u003e\n  \u003cp\u003eUsing the new, clean mounting bolt is critical. An old, dirty, or corroded bolt can impede the electrical connection between the anode and the engine, rendering the anode ineffective at protecting your expensive components.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\n  \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718266196283,"sku":"ZA496","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/ZA496.png?v=1762958546"},{"product_id":"aluminum-trim-tab-anode-fits-mercury-mariner-outboards-35hp-mercruiser-alpha-one-replaces-822777a1-46399a1","title":"Aluminum Trim Tab Anode – Fits Mercury\/Mariner Outboards 35HP+ \u0026 MerCruiser Alpha One (Replaces 822777A1, 46399A1)","description":"\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis high-quality \u003cstrong\u003eAluminum Trim Tab Anode\u003c\/strong\u003e is engineered for a broad range of Mercury\/Mariner outboards (35HP and above, 1994–present), MerCruiser Alpha One stern drives (1985–1990), and select Force outboards (90\/120HP, 1995+). It serves as a crucial sacrificial component, protecting your engine's lower unit from galvanic corrosion in both fresh and salt water.\u003c\/p\u003e\n\u003cp\u003eIt directly replaces OEM and aftermarket part numbers including Sierra 18-6014A, Mercury 822777A1, Mercury 46399A1, Mercury 822777Q1, GLM 12680, and Tecnoseal 00804AL.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on installation with a single center bolt.\u003c\/li\u003e\n\u003cli\u003eDesigned for optimal protection in fresh, brackish, and salt water.\u003c\/li\u003e\n\u003cli\u003eProvides enhanced propeller clearance for high-rake propeller applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e18-6014A\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e822777A1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eGLM\u003c\/td\u003e\n        \u003ctd\u003e12680\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eTecnoseal\u003c\/td\u003e\n        \u003ctd\u003e00804AL\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eFor Mercury, Mariner, and Force Outboards:\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Mercury, Mariner, and Force Outboard Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e225 (3.0L Carb)\u003c\/td\u003e\n        \u003ctd\u003e225\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1994–1998\u003c\/td\u003e\n        \u003ctd\u003e822777A1\/822777Q1\u003c\/td\u003e\n        \u003ctd\u003eS\/N 0D280813 thru 0G760299\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e225 (3.0L Carb)\u003c\/td\u003e\n        \u003ctd\u003e225\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1999–2001\u003c\/td\u003e\n        \u003ctd\u003e822777A1\/822777Q1\u003c\/td\u003e\n        \u003ctd\u003eS\/N 0G760300 thru 0T408999\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e225 Marathon (3.0L Carb)\u003c\/td\u003e\n        \u003ctd\u003e225\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1994–1995\u003c\/td\u003e\n        \u003ctd\u003e822777A1\/822777Q1\u003c\/td\u003e\n        \u003ctd\u003eS\/N 0G245605 thru 0G760299\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e225 SeaPro (3.0L Carb)\u003c\/td\u003e\n        \u003ctd\u003e225\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1994–1998\u003c\/td\u003e\n        \u003ctd\u003e822777A1\/822777Q1\u003c\/td\u003e\n        \u003ctd\u003eS\/N 0G245605 thru 0G760299\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003eMost outboard models\u003c\/td\u003e\n        \u003ctd\u003e35+\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995-Present\u003c\/td\u003e\n        \u003ctd\u003e46399A1\/46399A2\u003c\/td\u003e\n        \u003ctd\u003eFor models requiring high-rake propeller clearance\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eForce\u003c\/td\u003e\n        \u003ctd\u003e90\/120\u003c\/td\u003e\n        \u003ctd\u003e90\/120\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995 and up\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eFor MerCruiser Stern Drives:\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"MerCruiser Stern Drive Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eAlpha One SS\u003c\/td\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1986–1989\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eSSM II\/III\/IV\/V\u003c\/td\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1985–1990\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n        \u003ctd\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eAll stern drive models\u003c\/td\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1985-Present\u003c\/td\u003e\n        \u003ctd\u003e46399A1\/822777A1\u003c\/td\u003e\n        \u003ctd\u003eFor applications requiring high-rake propeller clearance\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eAluminum Trim Tab Anode\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eBolt-on\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eAluminum Alloy\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eFresh water and salt water\u003c\/dd\u003e\n  \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eSingle bolt mount, 7\/16\"-14 thread\u003c\/dd\u003e\n  \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e3-1\/2\" diameter × 3-1\/2\" height (89 mm × 89 mm)\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e1.0 lb (0.45 kg)\u003c\/dd\u003e\n  \u003cdt\u003eThread Size\u003c\/dt\u003e\n\u003cdd\u003e7\/16\"-14\u003c\/dd\u003e\n  \u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003eManufacturer standard warranty\u003c\/dd\u003e\n  \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eProvides longer-lasting protection than zinc anodes in brackish or fresh water\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aluminum Trim Tab Anode (822777A1\/46399A1)\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color:#d0021b;\"\u003e1 x Mounting Bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the engine is off and the battery is disconnected for safety.\u003c\/li\u003e\n\u003cli\u003eLocate and unbolt the old trim tab anode from the underside of the anti-ventilation plate.\u003c\/li\u003e\n\u003cli\u003eThoroughly clean the mounting surface on the gearcase, ensuring a clean, bare metal contact point for electrical continuity.\u003c\/li\u003e\n\u003cli\u003ePosition the new anode and fasten it securely with the provided mounting bolt. Do not over-tighten.\u003c\/li\u003e\n\u003cli\u003eEnsure the new anode does not interfere with the propeller's movement. Adjust if necessary.\u003c\/li\u003e\n\u003cli\u003eOnce installation is confirmed correct, reconnect the battery.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this aluminum anode better than a zinc one?\u003c\/summary\u003e\u003cp\u003eAluminum anodes provide superior protection in fresh and brackish water environments compared to traditional zinc anodes. They are also effective in salt water, making them an excellent all-around choice.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I know when to replace my trim tab anode?\u003c\/summary\u003e\u003cp\u003eInspect your anodes at least every six months. You should replace them when they are approximately 50% consumed or show signs of severe pitting, crumbling, or have fallen off. Regular replacement is critical for engine protection.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I install this part myself?\u003c\/summary\u003e\u003cp\u003eYes, this is a straightforward DIY task for most boat owners. It only requires basic hand tools to unbolt the old anode and install the new one. However, always follow safety precautions, such as disconnecting the battery.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy is a clean mounting surface so important?\u003c\/summary\u003e\u003cp\u003eThe anode must make direct metal-to-metal contact with the gearcase to work correctly. Paint, corrosion, or marine growth on the mounting surface can insulate the anode, rendering it ineffective and putting your engine at risk.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eShipping speed \u0026amp; cost?\u003c\/summary\u003e\u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWarranty \u0026amp; returns?\u003c\/summary\u003e\u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718266229051,"sku":"QM-24ZA497","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/QM-24ZA497.png?v=1762958548"},{"product_id":"aluminum-trim-tab-anode-fits-mercury-mariner-outboards-mercruiser-sterndrives-replaces-822777q1-46399a1","title":"Aluminum Trim Tab Anode – Fits Mercury\/Mariner Outboards \u0026 MerCruiser Sterndrives (Replaces 822777Q1, 46399A1)","description":"\u003csection\u003e\n\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;       \/* Do not wrap *\/\n    word-break:normal;        \/* Don’t break words *\/\n    letter-spacing:normal;    \/* Prevent theme styles from stretching letters *\/\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis high-quality \u003cstrong\u003eAluminum Trim Tab Anode – Fits Mercury\/Mariner Outboards \u0026amp; MerCruiser Sterndrives (Replaces 822777Q1, 46399A1)\u003c\/strong\u003e is designed for Mercury\/Mariner outboards (35HP and above, 1995+), Force outboards (90\/120HP, 1995+), and all MerCruiser sterndrive applications that require additional clearance for high-rake propellers. It provides essential corrosion protection for the gear case housing while providing hydrodynamic trim force to aid steering.\u003c\/p\u003e\n\u003cp\u003eThis part offers a direct interchange for Mercury OEM part numbers 822777Q1, 97-822777Q1, and 46399A1, as well as Sierra equivalents 18-6014, 18-6014A, and 12680.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFeatures a direct bolt-on installation with all necessary mounting hardware included.\u003c\/li\u003e\n  \u003cli\u003eConstructed from cast aluminum meeting MIL-A-24779(SH) specifications for reliable performance in both fresh and salt water.\u003c\/li\u003e\n  \u003cli\u003eSpecifically engineered with a compact design to provide extra clearance for high-rake propellers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to confirm equivalent references across OEM and aftermarket.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e97-822777Q1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e46399A1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e18-6014\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e18-6014A\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eSierra\u003c\/td\u003e\n        \u003ctd\u003e12680\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm your engine model\/year in the table below.\u003c\/p\u003e\n\u003cp\u003eFits various Mercury\/Mariner and Force outboards from 1995 and newer that require additional propeller clearance.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Mercury\/Mariner and Force Outboard Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003e35+\u003c\/td\u003e\n        \u003ctd\u003e2- \u0026amp; 4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995+\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n        \u003ctd\u003eFor applications requiring extra clearance\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eForce\u003c\/td\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003e90, 120\u003c\/td\u003e\n        \u003ctd\u003e2-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1995+\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n        \u003ctd\u003eConfirmed application\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eFits all MerCruiser sterndrive models that require extra clearance for high-rake propellers.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"MerCruiser Sterndrive Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eYears\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eNotes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMerCruiser\u003c\/td\u003e\n        \u003ctd\u003eAll models\u003c\/td\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003eVarious\u003c\/td\u003e\n        \u003ctd\u003eAll\u003c\/td\u003e\n        \u003ctd\u003e822777Q1\u003c\/td\u003e\n        \u003ctd\u003eFor applications requiring extra clearance for high-rake propellers\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eAluminum Trim Tab Anode\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect bolt-on with included hardware\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eCast aluminum (meets\/exceeds mil-spec MIL-A-24779(SH))\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eFor use with high-rake propellers requiring extra clearance\u003c\/dd\u003e\n  \u003cdt\u003eEnvironment\u003c\/dt\u003e\n\u003cdd\u003eFresh water or salt water compatible\u003c\/dd\u003e\n  \u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e7.75 × 6.68 × 4.00 in (196.9 × 169.7 × 101.6 mm)\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e0.81 lb (0.37 kg)\u003c\/dd\u003e\n  \u003cdt\u003eColor\u003c\/dt\u003e\n\u003cdd\u003eSilver\/metallic (aluminum)\u003c\/dd\u003e\n  \u003cdt\u003eMounting Hardware\u003c\/dt\u003e\n\u003cdd\u003eIncluded\u003c\/dd\u003e\n  \u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003e1 year\u003c\/dd\u003e\n  \u003cdt\u003ePurpose\u003c\/dt\u003e\n\u003cdd\u003eProtects gear case housing from corrosion while providing hydrodynamic trim force to aid steering\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Aluminum Trim Tab Anode (822777Q1)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e1 × Hardware Kit\u003c\/span\u003e (bolts and washers for installation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the boat's battery before beginning work.\u003c\/li\u003e\n  \u003cli\u003eLocate and carefully unbolt the old trim tab anode from the underside of the anti-ventilation plate on the gearcase.\u003c\/li\u003e\n  \u003cli\u003eThoroughly clean the mounting surface where the anode sits to ensure a clean, bare-metal contact for proper electrical conductivity.\u003c\/li\u003e\n  \u003cli\u003ePosition the new anode and install it using the provided bolts and washers. Tighten securely, but do not over-torque.\u003c\/li\u003e\n  \u003cli\u003eAfter installation, check for adequate clearance between the anode and the propeller blades through the full range of trim and tilt motion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhy is this anode shaped differently or needed for \"high-rake propellers\"?\u003c\/summary\u003e\n  \u003cp\u003eHigh-rake propellers have blades that sweep back at a steeper angle. This anode's compact design provides the necessary extra clearance to prevent the propeller tips from striking the anode, which could cause damage to both components.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs an aluminum anode correct for my boat?\u003c\/summary\u003e\n  \u003cp\u003eAluminum anodes are the industry standard for modern outboards and sterndrives. They are highly effective in all water types—salt, brackish, and fresh—offering broader protection than traditional zinc (salt only) or magnesium (fresh only) anodes.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow often should I replace my trim tab anode?\u003c\/summary\u003e\n  \u003cp\u003eAnodes should be inspected at least once a year or every 100 hours of operation. You should replace any anode once it has reached 50% corrosion. Never paint an anode, as this will render it useless.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are signs of a failing anode?\u003c\/summary\u003e\n  \u003cp\u003eIf you notice rapid or uneven corrosion on your gearcase, propeller, or other underwater metallic parts, your anode may be depleted, making poor electrical contact, or be the wrong material for the water type. A heavily pitted or mostly dissolved anode is a clear sign it's time for replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan this replace a zinc anode on an older motor?\u003c\/summary\u003e\n  \u003cp\u003eYes, aluminum is a suitable and often superior replacement for zinc anodes on older engines, particularly if the boat is used in brackish or fresh water in addition to salt water. For best results, do not mix anode types (e.g., zinc and aluminum) on the same engine.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eOEM vs. Aftermarket?\u003c\/summary\u003e\n  \u003cp\u003eThis listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eShipping speed \u0026amp; cost\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWarranty \u0026amp; returns\u003c\/summary\u003e\n  \u003cp\u003eCovered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused \u0026amp; in original condition). See our policy page or reach out for instructions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify images\/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or QC.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718266327355,"sku":"ETZA496","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/ETZA496.png?v=1762958551"},{"product_id":"lower-unit-drain-plug-kit-fits-mercury-mercruiser-replaces-8m0058389-79953q04","title":"Magnetic Lower Unit Drain Plug with Gasket – Fits Mercury\/MerCruiser (Replaces 8M0058389, 79953Q04)","description":"\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eProduct Details\u003c\/h2\u003e\n    \u003cp\u003eThis Sea Sierra \u003cstrong\u003emagnetic lower unit drain plug\u003c\/strong\u003e is designed for compatible Mercury and MerCruiser gearcases that use the corresponding threaded drain and fill screw. The magnetic tip helps collect ferrous particles suspended in the gear lubricant, making the plug useful during routine gear-lube service and inspection.\u003c\/p\u003e\n    \u003cp\u003eThe replacement plug is listed for interchange with several Mercury\/Quicksilver and aftermarket references, including Mercury\/Quicksilver 8M0058389 and 79953Q04, Sierra 18-2375, and GLM 21731. Always compare the thread, head style, sealing surface, and original part number before installation.\u003c\/p\u003e\n    \u003cul\u003e\n        \u003cli\u003eMagnetic drain-plug design helps collect ferrous metal particles from the gearcase lubricant.\u003c\/li\u003e\n        \u003cli\u003eThreaded installation is intended for compatible lower-unit drain and fill openings.\u003c\/li\u003e\n        \u003cli\u003eSupplied with a sealing gasket for replacement during gear-lube service.\u003c\/li\u003e\n        \u003cli\u003eAftermarket replacement part; not manufactured by Mercury Marine.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n    \u003cp\u003eThe references below are listed as replacement or interchange numbers. They should be used together with a physical-part and application check; the numbers do not by themselves confirm fitment for every engine or sterndrive.\u003c\/p\u003e\n    \u003cdiv class=\"ss-table-wrap\"\u003e\n        \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n            \u003cthead\u003e\n                \u003ctr\u003e\n                    \u003cth\u003eBrand\u003c\/th\u003e\n                    \u003cth\u003ePart Number\u003c\/th\u003e\n                    \u003cth\u003eReference Type\u003c\/th\u003e\n                \u003c\/tr\u003e\n            \u003c\/thead\u003e\n            \u003ctbody\u003e\n                \u003ctr\u003e\n\u003ctd\u003eMercury \/ Quicksilver\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eMercury \/ Quicksilver\u003c\/td\u003e\n\u003ctd\u003e79953Q04\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e67892A1\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e67892A05\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e67892A06\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e14834A1\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-2375\u003c\/td\u003e\n\u003ctd\u003eAftermarket reference; magnetic drain plug\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-23751-9\u003c\/td\u003e\n\u003ctd\u003eRelated package reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eGLM\u003c\/td\u003e\n\u003ctd\u003e21731\u003c\/td\u003e\n\u003ctd\u003eAftermarket reference\u003c\/td\u003e\n\u003c\/tr\u003e\n                \u003ctr\u003e\n\u003ctd\u003eMallory\u003c\/td\u003e\n\u003ctd\u003e9-72651\u003c\/td\u003e\n\u003ctd\u003eAftermarket reference\u003c\/td\u003e\n\u003c\/tr\u003e\n            \u003c\/tbody\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eApplication and Compatibility\u003c\/h2\u003e\n    \u003cp\u003eThis plug is intended for compatible Mercury and Mariner outboard lower units and MerCruiser sterndrives using the matching drain\/fill plug specification. Commonly referenced MerCruiser drive families include MC-1, Alpha One, Alpha One Gen II, TR, TRS, I, R, and MR, but application can vary by year, gearcase, serial number, and production change.\u003c\/p\u003e\n    \u003cp\u003eDo not rely on the engine brand or model family alone. Confirm the original plug, thread size, sealing surface, and manufacturer part number before ordering. Verado and other applications using a different drain-plug design may not be compatible.\u003c\/p\u003e\n    \u003cdiv class=\"ss-table-wrap\"\u003e\n        \u003ctable class=\"ss-table\" aria-label=\"Compatibility Verification Guide\"\u003e\n            \u003cthead\u003e\n                \u003ctr\u003e\n                    \u003cth\u003eApplication Area\u003c\/th\u003e\n                    \u003cth\u003eUse\u003c\/th\u003e\n                    \u003cth\u003eVerification Required\u003c\/th\u003e\n                \u003c\/tr\u003e\n            \u003c\/thead\u003e\n            \u003ctbody\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eMercury and Mariner outboards\u003c\/td\u003e\n                    \u003ctd\u003eLower-unit gear-lube drain or fill opening\u003c\/td\u003e\n                    \u003ctd\u003eConfirm exact model, year, serial range, and original plug\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eMerCruiser sterndrives\u003c\/td\u003e\n                    \u003ctd\u003eDrive or lower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n                    \u003ctd\u003eConfirm drive family and plug specification\u003c\/td\u003e\n                \u003c\/tr\u003e\n                \u003ctr\u003e\n                    \u003ctd\u003eVerado and other specialty applications\u003c\/td\u003e\n                    \u003ctd\u003eApplication may use a different plug design\u003c\/td\u003e\n                    \u003ctd\u003eDo not install without exact part-number confirmation\u003c\/td\u003e\n                \u003c\/tr\u003e\n            \u003c\/tbody\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n    \u003cdl\u003e\n        \u003cdt\u003eProduct Type\u003c\/dt\u003e\n        \u003cdd\u003eMagnetic lower-unit drain plug with sealing gasket\u003c\/dd\u003e\n        \u003cdt\u003eInstallation\u003c\/dt\u003e\n        \u003cdd\u003eThreaded replacement installation\u003c\/dd\u003e\n        \u003cdt\u003eThread Size\u003c\/dt\u003e\n        \u003cdd\u003e3\/8-16 UNC, where specified by the matching application\u003c\/dd\u003e\n        \u003cdt\u003ePlug Function\u003c\/dt\u003e\n        \u003cdd\u003eLower-unit gear-lube drain\/fill closure\u003c\/dd\u003e\n        \u003cdt\u003eMagnetic Element\u003c\/dt\u003e\n        \u003cdd\u003eYes; intended to collect ferrous particles in the lubricant\u003c\/dd\u003e\n        \u003cdt\u003eFinish\u003c\/dt\u003e\n        \u003cdd\u003eMetallic silver\/chrome appearance\u003c\/dd\u003e\n        \u003cdt\u003eSeal\u003c\/dt\u003e\n        \u003cdd\u003eReplacement sealing gasket included\u003c\/dd\u003e\n        \u003cdt\u003eConstruction\u003c\/dt\u003e\n        \u003cdd\u003eMetal threaded plug with magnetic tip\u003c\/dd\u003e\n    \u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003e1 x Magnetic lower-unit drain plug\u003c\/li\u003e\n        \u003cli\u003e1 x Sealing gasket\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis listing is for the magnetic plug configuration. It does not include a gear-lube pump, gear lubricant, additional vent plug, or installation tools.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n    \u003col\u003e\n        \u003cli\u003ePlace a suitable drain pan below the outboard lower unit or sterndrive.\u003c\/li\u003e\n        \u003cli\u003eRemove the upper vent screw and lower drain screw with the correct large flat-blade driver.\u003c\/li\u003e\n        \u003cli\u003eAllow the old gear lubricant to drain completely. Inspect it for excessive metal particles or a milky appearance, which may indicate internal wear or water intrusion.\u003c\/li\u003e\n        \u003cli\u003eClean the area around the drain and vent openings and remove the old gasket material.\u003c\/li\u003e\n        \u003cli\u003eFit the new gasket to the magnetic drain plug and install it in the correct lower opening by hand to avoid cross-threading.\u003c\/li\u003e\n        \u003cli\u003eFill the gearcase with the lubricant specified by the engine or sterndrive manufacturer through the lower opening until lubricant appears at the upper vent opening.\u003c\/li\u003e\n        \u003cli\u003eInstall the upper vent screw with the appropriate new gasket if required by the application.\u003c\/li\u003e\n        \u003cli\u003eRemove the lubricant pump and promptly install the lower drain plug with its gasket.\u003c\/li\u003e\n        \u003cli\u003eTighten both screws to the torque specified in the applicable service manual. Do not overtighten.\u003c\/li\u003e\n        \u003cli\u003eClean excess lubricant and check both openings for leaks after service.\u003c\/li\u003e\n    \u003c\/ol\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eWill this plug fit every Mercury or Mariner outboard?\u003c\/summary\u003e\n        \u003cp\u003eNo. Mercury and Mariner applications vary by model, year, serial range, gearcase, and production change. Confirm the original plug and exact reference number before ordering.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eWill it fit a Verado outboard?\u003c\/summary\u003e\n        \u003cp\u003eDo not assume compatibility with Verado models. Some applications use a different drain-plug design. Confirm the exact service-part requirement for your engine before installation.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eWhat does the magnet do?\u003c\/summary\u003e\n        \u003cp\u003eThe magnetic tip is intended to collect ferrous particles in the gear lubricant. Inspecting the plug during an oil change can help identify abnormal wear, although the plug is not a substitute for a complete mechanical inspection.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eShould I replace the gasket?\u003c\/summary\u003e\n        \u003cp\u003eYes. Replace the sealing gasket whenever the drain plug is removed if the application uses a replaceable gasket. A new gasket helps reduce the risk of seepage.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eWhat torque specification should I use?\u003c\/summary\u003e\n        \u003cp\u003eTorque specifications vary by engine and sterndrive model. Use the applicable manufacturer service manual rather than relying on a general tightening rule. Avoid overtightening, which can damage the threads, gearcase, plug, or sealing surface.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n        \u003csummary\u003eIs this an OEM Mercury part?\u003c\/summary\u003e\n        \u003cp\u003eNo. This is an aftermarket replacement that references the listed Mercury\/Quicksilver part numbers for application comparison.\u003c\/p\u003e\n    \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003eVerify the original part number, thread, gasket style, and physical dimensions before purchase.\u003c\/li\u003e\n        \u003cli\u003eKeep the model, year, horsepower, stroke, shaft, and serial-number conditions together when checking compatibility.\u003c\/li\u003e\n        \u003cli\u003eUse only the gear lubricant specified for your engine or sterndrive.\u003c\/li\u003e\n        \u003cli\u003eDispose of used gear lubricant according to local regulations.\u003c\/li\u003e\n        \u003cli\u003eProfessional installation is recommended if you are unsure of the correct drain and vent openings or torque specification.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003eMarine replacement parts developed for routine service and repair applications.\u003c\/li\u003e\n        \u003cli\u003eProduct references are provided to help compare compatible replacement components.\u003c\/li\u003e\n        \u003cli\u003eConfirm application details before installation for the best fit and sealing performance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718267146555,"sku":"ZQ-92DU-C8EJ","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/ZQ-92DU-C8EJ.png?v=1762958577"},{"product_id":"magnetic-drain-plug-fits-mercury-mercruiser-outboards-sterndrives-replaces-8m0058389-67892a1","title":"Magnetic Drain Plug – Fits Mercury \u0026 MerCruiser Outboards \u0026 SternDrives (Replaces 8M0058389, 67892A1)","description":"\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003emagnetic drain plug\u003c\/strong\u003e is a replacement lower-unit gear-lube drain and fill screw for compatible Mercury and MerCruiser marine applications. It is designed for MerCruiser sterndrives that use a 3\/8-16 threaded drain\/fill screw, including Alpha One, Alpha One Gen II, MC-1, TR, TRS, I, R, and MR drives. It also fits a wide range of Mercury and Mariner outboards using the same 3\/8-16 drain\/fill thread; verify the original plug and application before ordering.\u003c\/p\u003e\n\u003cp\u003eThe plug is cross-referenced to Mercury\/QuickSilver 8M0058389, Mercury 67892A1, 67892A06, 67892A05, and 14834A1, as well as aftermarket references Sierra 18-2375, Sierra 18-23751-9, GLM 21731, and Mallory 9-72651.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThreaded replacement plug supplied with a sealing component.\u003c\/li\u003e\n\u003cli\u003eMagnetic tip collects ferrous particles suspended in the gear lubricant.\u003c\/li\u003e\n\u003cli\u003eSuitable for lower-unit gear-lube drain and fill openings when the original application uses a 3\/8-16 UNC plug.\u003c\/li\u003e\n\u003cli\u003eVerify the part number, thread size, and drive or outboard application before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eThe references below are provided for identification and cross-reference purposes. Confirm the application and dimensions before purchase.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/QuickSilver\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e67892A1\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e67892A06\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e67892A05\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e14834A1\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-2375\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-23751-9\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eGLM\u003c\/td\u003e\n\u003ctd\u003e21731\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMallory\u003c\/td\u003e\n\u003ctd\u003e9-72651\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eCompatibility depends on the use of a 3\/8-16 UNC drain\/fill screw. Always compare the existing plug, thread size, sealing arrangement, and application before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMerCruiser sterndrives:\u003c\/strong\u003e The plug is intended for compatible lower-unit gear-lube drain and fill openings on the following drive families:\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"MerCruiser Engine and Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eReference Part No.\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eAlpha One\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eAlpha One Gen II\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eMC-1\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eTR\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eTRS\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eI\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eR\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMerCruiser\u003c\/td\u003e\n\u003ctd\u003eMR\u003c\/td\u003e\n\u003ctd\u003eVerify by application\u003c\/td\u003e\n\u003ctd\u003e8M0058389\u003c\/td\u003e\n\u003ctd\u003eLower-unit gear-lube drain\/fill opening\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eFor Mercury and Mariner outboards, verify that the engine uses a 3\/8-16 drain\/fill screw. The original listing identifies the Verado series as excluded; confirm the specific engine model before ordering.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n  \u003cdd\u003eMagnetic lower-unit gear-lube drain plug\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n  \u003cdd\u003eThreaded plug with sealing component\u003c\/dd\u003e\n  \u003cdt\u003eThread Size\u003c\/dt\u003e\n  \u003cdd\u003e3\/8-16 UNC\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n  \u003cdd\u003eThreaded drain\/fill plug\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n  \u003cdd\u003eMetal housing with magnetic element\u003c\/dd\u003e\n  \u003cdt\u003eColor\u003c\/dt\u003e\n  \u003cdd\u003eChrome\/silver\u003c\/dd\u003e\n  \u003cdt\u003eFunction\u003c\/dt\u003e\n  \u003cdd\u003eCaptures ferrous particles in the gear lubricant during service\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e1 x\u003c\/span\u003e Magnetic lower-unit gear-lube drain\/fill plug with sealing component\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eTurn the engine off, place the drive unit in a suitable service position, and position a drain pan beneath the lower unit.\u003c\/li\u003e\n\u003cli\u003eUse a large, correctly fitting flat-blade screwdriver to remove the lower drain plug and upper vent plug.\u003c\/li\u003e\n\u003cli\u003eAllow the gear lubricant to drain completely. Inspect it for water contamination, a milky appearance, or unusual metal debris.\u003c\/li\u003e\n\u003cli\u003eClean the sealing surfaces around the drain and vent openings.\u003c\/li\u003e\n\u003cli\u003eInstall the magnetic plug in the lower opening with the sealing component in place. Tighten according to the manufacturer’s service guidance; do not overtighten.\u003c\/li\u003e\n\u003cli\u003ePump the manufacturer-recommended gear lubricant into the lower opening until it reaches the upper vent opening.\u003c\/li\u003e\n\u003cli\u003eInstall and tighten the upper vent plug.\u003c\/li\u003e\n\u003cli\u003eRemove the lubricant-pump nozzle and promptly install and tighten the lower drain plug.\u003c\/li\u003e\n\u003cli\u003eWipe the drive clean and inspect both plugs for leaks after servicing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich MerCruiser sterndrives does this plug fit?\u003c\/summary\u003e\n\u003cp\u003eIt is intended for compatible MerCruiser sterndrives using a 3\/8-16 UNC gear-lube drain\/fill screw, including Alpha One, Alpha One Gen II, MC-1, R, MR, TR, and TRS drive families. Verify the specific application and original plug before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWill this fit my Mercury or Mariner outboard?\u003c\/summary\u003e\n\u003cp\u003eIt fits Mercury and Mariner outboards that use a compatible 3\/8-16 drain\/fill screw. The original application information excludes the Verado series. Confirm the engine model, original part number, and thread size before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow does the magnetic feature work?\u003c\/summary\u003e\n\u003cp\u003eThe magnet attracts and holds ferrous particles circulating in the gear lubricant. Inspect the plug during service; a small amount of fine debris may occur, while large chips or excessive debris can indicate an internal gear-case issue.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the thread size?\u003c\/summary\u003e\n\u003cp\u003eThis plug uses a 3\/8-16 UNC thread. Confirm that your original drain\/fill plug uses the same thread before installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eShould the seal be replaced during gear-lube service?\u003c\/summary\u003e\n\u003cp\u003eInspect the sealing component every time the gear lubricant is changed and replace it if damaged, compressed, or otherwise unable to provide a reliable seal. Follow the service guidance for your specific drive or outboard.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the signs of a leaking or damaged drain plug?\u003c\/summary\u003e\n\u003cp\u003ePossible signs include lubricant dripping from the drain opening, a low gear-lube level, water contamination, damaged sealing surfaces, or damaged threads. Milky lubricant or excessive metal debris should be investigated before the unit is returned to service.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\n\u003cp\u003eThis listing is for an aftermarket replacement. The referenced Mercury and aftermarket numbers are provided for identification and cross-reference purposes only; verify application and dimensions before installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat should I verify before ordering?\u003c\/summary\u003e\n\u003cp\u003eVerify the original part number, 3\/8-16 UNC thread, drive or outboard model, sealing arrangement, and the intended drain\/fill location. Do not rely on model-family names alone when the application is uncertain.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eService the gear case only with the engine stopped and the boat securely supported.\u003c\/li\u003e\n\u003cli\u003eUse the lubricant specified by the engine or drive manufacturer.\u003c\/li\u003e\n\u003cli\u003eDo not force the plug or overtighten it, as damaged threads or sealing surfaces can cause leaks.\u003c\/li\u003e\n\u003cli\u003eVerify the original part, thread size, and application before purchase and installation.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended when the gear case, threads, or sealing surfaces are damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine replacement parts selected for demanding service environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobal Fulfillment\u003c\/strong\u003e — Delivery options and estimated transit times are shown at checkout based on destination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue-Focused Marine Parts\u003c\/strong\u003e — We aim to provide practical replacement solutions with clear application information.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718267179323,"sku":"6A-C66D-FM6S","price":21.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/6A-C66D-FM6S.png?v=1762958578"},{"product_id":"inline-fuel-filter-fits-johnson-evinrude-mercury-3-8-replaces-398319-802128a1","title":"Inline Fuel Filter for 3\/8 in. Fuel Hose – Johnson\/Evinrude and Mercury Replacement","description":"\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis aftermarket inline fuel filter is intended for outboard fuel systems that use 3\/8-inch (approximately 10 mm) inside-diameter fuel hose. It installs in the fuel line between the tank and engine to help capture fuel contaminants before they reach sensitive fuel-system components.\u003c\/p\u003e\n  \u003cp\u003eThe filter is commonly listed as a replacement or interchange reference for Johnson\/Evinrude 398319 and Mercury 802128A1\/802128. Additional aftermarket reference numbers associated with this filter style include Sierra 18-7831, GLM 40160, Mallory 9-37960, Wix 33033, and Fram G3\/G15. Reference numbers are provided for identification; confirm the hose size, filter configuration, and application before ordering.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eInline installation on a compatible 3\/8-inch fuel line.\u003c\/li\u003e\n    \u003cli\u003e10-micron filtration rating as specified for this filter.\u003c\/li\u003e\n    \u003cli\u003eSonically sealed plastic housing intended for gasoline and ethanol-blended fuels.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cstyle\u003e\n    .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n    table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n    table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n    table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n    @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n  \u003c\/style\u003e\n\n  \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n  \u003cp\u003eThe following numbers are commonly associated with this filter type. Verify the original filter and your engine or fuel-system requirements before purchase.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n\u003ctd\u003e398319\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e802128A1\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e802128\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-7831\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eGLM\u003c\/td\u003e\n\u003ctd\u003e40160\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMallory\u003c\/td\u003e\n\u003ctd\u003e9-37960\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eWix\u003c\/td\u003e\n\u003ctd\u003e33033\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eFram\u003c\/td\u003e\n\u003ctd\u003eG3\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eFram\u003c\/td\u003e\n\u003ctd\u003eG15\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eEngine and Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThis filter is intended for compatible Johnson\/Evinrude, Mercury, and other marine fuel systems using a 3\/8-inch fuel line. A general brand or horsepower range is not sufficient to confirm fitment because fuel-filter requirements can vary by engine model, year, fuel-system layout, and hose size.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Application Guidance\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n\u003cth\u003eBrand or Application\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eFitment Requirement\u003c\/th\u003e\n\u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n          \u003ctd\u003eApplications using the listed replacement reference\u003c\/td\u003e\n          \u003ctd\u003eNot specified\u003c\/td\u003e\n          \u003ctd\u003eNot specified\u003c\/td\u003e\n          \u003ctd\u003eNot specified\u003c\/td\u003e\n          \u003ctd\u003e398319\u003c\/td\u003e\n          \u003ctd\u003eVerify the exact engine application and 3\/8-inch fuel-line connection.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003eApplications using the listed replacement reference\u003c\/td\u003e\n          \u003ctd\u003eNot specified\u003c\/td\u003e\n          \u003ctd\u003eNot specified\u003c\/td\u003e\n          \u003ctd\u003eNot specified\u003c\/td\u003e\n          \u003ctd\u003e802128 or 802128A1\u003c\/td\u003e\n          \u003ctd\u003eVerify the exact engine application and 3\/8-inch fuel-line connection.\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eInline fuel filter\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eInline in a compatible fuel hose\u003c\/dd\u003e\n    \u003cdt\u003eFiltration Rating\u003c\/dt\u003e\n\u003cdd\u003e10 micron\u003c\/dd\u003e\n    \u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline and ethanol-blended gasoline\u003c\/dd\u003e\n    \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003e3\/8-inch (approximately 10 mm) hose barbs\u003c\/dd\u003e\n    \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003ePlastic housing with metal end caps\u003c\/dd\u003e\n    \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eClear or translucent body with black ends\u003c\/dd\u003e\n    \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e59 g (2.08 oz)\u003c\/dd\u003e\n    \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eBarbed hose connection\u003c\/dd\u003e\n    \u003cdt\u003eOther Technical Attributes\u003c\/dt\u003e\n\u003cdd\u003eSonically sealed end caps; intended for use with ethanol-blended fuels\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 × inline fuel filter\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eConfirm that the replacement filter has the correct hose-barb size and matches the original filter configuration.\u003c\/li\u003e\n    \u003cli\u003eWork in a well-ventilated area away from flames, sparks, and other ignition sources. Allow the engine to cool before service.\u003c\/li\u003e\n    \u003cli\u003eLocate the existing filter on the fuel line between the tank and engine, and place an absorbent cloth or suitable container below it.\u003c\/li\u003e\n    \u003cli\u003eRelieve fuel-system pressure as directed by the engine manufacturer's service instructions.\u003c\/li\u003e\n    \u003cli\u003eNote the direction-of-flow arrow on the old filter, if present, and disconnect the fuel hoses and clamps.\u003c\/li\u003e\n    \u003cli\u003eInstall the replacement filter with its flow arrow pointing toward the engine, if an arrow is marked on the filter body.\u003c\/li\u003e\n    \u003cli\u003ePush the hoses fully onto the barbs and secure the clamps without damaging the hose.\u003c\/li\u003e\n    \u003cli\u003ePrime the fuel system according to the engine manual and inspect all connections for leaks before starting the engine.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch2\u003eTroubleshooting and FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich engines does this filter fit?\u003c\/summary\u003e\n    \u003cp\u003eIt is intended for compatible applications using a 3\/8-inch fuel line and is commonly associated with Johnson\/Evinrude reference 398319 and Mercury references 802128 and 802128A1. Exact fitment depends on the engine model, year, fuel-system layout, and original filter. Confirm all of these details before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow often should I replace the fuel filter?\u003c\/summary\u003e\n    \u003cp\u003eReplacement intervals vary by engine manufacturer, operating conditions, fuel quality, and maintenance schedule. Inspect the filter regularly and follow the service interval in your engine or boat owner's manual. Replace it sooner if it is restricted, damaged, or contaminated.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the signs of a clogged fuel filter?\u003c\/summary\u003e\n    \u003cp\u003ePossible symptoms include hard starting, engine sputtering, loss of power, hesitation, or stalling, particularly under load. These symptoms can have other causes, so inspect the complete fuel system before replacing parts.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a direct replacement for my original filter?\u003c\/summary\u003e\n    \u003cp\u003eThis filter is commonly listed as an aftermarket replacement for several reference numbers, including Johnson\/Evinrude 398319 and Mercury 802128A1. Compare the original part number, hose size, flow direction, and physical configuration before installation.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the filtration rating?\u003c\/summary\u003e\n    \u003cp\u003eThe stated filtration rating is 10 microns.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan it be used with ethanol-blended fuel?\u003c\/summary\u003e\n    \u003cp\u003eThe housing and filter are specified for gasoline and ethanol-blended fuels. Always follow the fuel requirements and maintenance guidance for your engine.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\n    \u003cp\u003eNo. This listing is for an aftermarket replacement filter. Johnson\/Evinrude, Mercury, Sierra, GLM, Mallory, Wix, and Fram numbers are reference numbers used to help identify potentially compatible applications.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWarranty and returns\u003c\/summary\u003e\n    \u003cp\u003eWarranty and return eligibility are governed by the applicable seller policy. Contact support before installation if the item does not match the ordered configuration or your original filter.\u003c\/p\u003e\n  \u003c\/details\u003e\n\n  \u003ch2\u003eSafety and Important Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify the original part number, hose inside diameter, flow direction, and physical dimensions before ordering.\u003c\/li\u003e\n    \u003cli\u003eDo not rely on brand, horsepower, or year alone to confirm fitment.\u003c\/li\u003e\n    \u003cli\u003eFuel is flammable. Use appropriate safety procedures and dispose of spilled fuel and the old filter properly.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended if you are unfamiliar with marine fuel-system service.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMarine Parts Focus\u003c\/strong\u003e — Parts and replacement components for marine maintenance applications.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication-Conscious Support\u003c\/strong\u003e — Verify part numbers and physical specifications before installation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAftermarket Value\u003c\/strong\u003e — Replacement options for routine service and repair needs.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718271045947,"sku":"23FF667JLM","price":20.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/23FF667JLM.png?v=1762958729"},{"product_id":"hydrofoil-stabilizer-fits-yamaha-mercury-johnson-evinrude-honda-suzuki-tohatsu-8-40-hp-replaces-seasierra-fo2002-stingray-junior-2-hydrofoil-se-sport-200","title":"Hydrofoil Stabilizer for 8–40 HP Outboard Motors – Blue, Drilling-Mount Design","description":"\u003cstyle\u003e\n  \/* Outer container allows horizontal scrolling (with iOS momentum) *\/\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n\n  \/* Base table styles *\/\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n\n  \/* Key: prevent wrapping, word breaks, and vertical text in headers *\/\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n\n  \/* Small screen optimization *\/\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis \u003cstrong\u003eblue whale-tail hydrofoil stabilizer\u003c\/strong\u003e is designed for small outboard motors rated from 8 to 40 HP. Mounted to the anti-cavitation plate, it can help improve low-speed handling, reduce bow rise, and help the boat reach planing speed more efficiently.\u003c\/p\u003e\n  \u003cp\u003eThe stabilizer is intended for many Yamaha, Mercury, Johnson, Evinrude, Honda, Suzuki, and Tohatsu outboards. Compatibility depends on the exact engine configuration and anti-cavitation-plate shape, so confirm the dimensions and the application notes before installation.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eWhale-tail design for added stern lift and improved control.\u003c\/li\u003e\n    \u003cli\u003eMounts directly to the outboard anti-cavitation plate.\u003c\/li\u003e\n    \u003cli\u003eDrilling is required for installation; mounting hardware and a drill bit are included.\u003c\/li\u003e\n    \u003cli\u003eConstructed from durable marine-grade nylon plastic.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eEquivalent Aftermarket References\u003c\/h2\u003e\n  \u003cp\u003eThe following references are provided as aftermarket comparison terms. They are not manufacturer endorsements, and fitment should still be confirmed against the engine and product dimensions.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Equivalent Aftermarket References\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eReference\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSeaSierra\u003c\/td\u003e\n          \u003ctd\u003eFO2002\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eStingRay\u003c\/td\u003e\n          \u003ctd\u003eJunior 2 Hydrofoil\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSE Sport\u003c\/td\u003e\n          \u003ctd\u003e200\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eEngine Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThis hydrofoil is intended for many 8–40 HP outboard applications. Confirm the exact engine model, year, mounting area, and anti-cavitation-plate dimensions before drilling.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eMercury note:\u003c\/strong\u003e Do not use this product with Mercury 40, 50, or 60 four-stroke models unless fitment has been independently confirmed for the specific engine.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Engine Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eRated HP\u003c\/th\u003e\n          \u003cth\u003eStroke\u003c\/th\u003e\n          \u003cth\u003eApplication\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003e8–40 HP\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eMany applications\u003c\/td\u003e\n          \u003ctd\u003eVerify the exact model and plate dimensions.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003e8–40 HP\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eMany applications\u003c\/td\u003e\n          \u003ctd\u003eNot intended for 40, 50, or 60 four-stroke models unless specifically confirmed.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n          \u003ctd\u003e8–40 HP\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eMany applications\u003c\/td\u003e\n          \u003ctd\u003eVerify the exact model and plate dimensions.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHonda\u003c\/td\u003e\n          \u003ctd\u003e8–40 HP\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eMany applications\u003c\/td\u003e\n          \u003ctd\u003eVerify the exact model and plate dimensions.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSuzuki\u003c\/td\u003e\n          \u003ctd\u003e8–40 HP\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eMany applications\u003c\/td\u003e\n          \u003ctd\u003eVerify the exact model and plate dimensions.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTohatsu\u003c\/td\u003e\n          \u003ctd\u003e8–40 HP\u003c\/td\u003e\n          \u003ctd\u003e2-Stroke and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eMany applications\u003c\/td\u003e\n          \u003ctd\u003eVerify the exact model and plate dimensions.\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n    \u003cdd\u003eHydrofoil stabilizer\u003c\/dd\u003e\n    \u003cdt\u003eApplication\u003c\/dt\u003e\n    \u003cdd\u003eOutboard and compatible sterndrive mounting applications\u003c\/dd\u003e\n    \u003cdt\u003eConnection\u003c\/dt\u003e\n    \u003cdd\u003eAnti-cavitation plate mount\u003c\/dd\u003e\n    \u003cdt\u003eMaterial\u003c\/dt\u003e\n    \u003cdd\u003eMarine-grade nylon PA66 plastic\u003c\/dd\u003e\n    \u003cdt\u003eColor\u003c\/dt\u003e\n    \u003cdd\u003eBlue\u003c\/dd\u003e\n    \u003cdt\u003eDimensions\u003c\/dt\u003e\n    \u003cdd\u003e13.39 × 13.7 in. (340 × 348 mm)\u003c\/dd\u003e\n    \u003cdt\u003eWeight\u003c\/dt\u003e\n    \u003cdd\u003e1.33 kg (2.94 lb)\u003c\/dd\u003e\n    \u003cdt\u003eMounting Hardware\u003c\/dt\u003e\n    \u003cdd\u003eStainless-steel screws and nuts\u003c\/dd\u003e\n    \u003cdt\u003eInstallation Method\u003c\/dt\u003e\n    \u003cdd\u003eDrilling required; 6.5 mm drill bit included\u003c\/dd\u003e\n    \u003cdt\u003eHorsepower Range\u003c\/dt\u003e\n    \u003cdd\u003e8–40 HP\u003c\/dd\u003e\n    \u003cdt\u003eLower-Power Applications\u003c\/dt\u003e\n    \u003cdd\u003eSome 4 HP applications may be compatible; verify dimensions before purchase.\u003c\/dd\u003e\n    \u003cdt\u003eEngine Type\u003c\/dt\u003e\n    \u003cdd\u003e2-Stroke and 4-Stroke applications, as applicable\u003c\/dd\u003e\n    \u003cdt\u003eDesign\u003c\/dt\u003e\n    \u003cdd\u003eWhale-tail profile for added lift and control\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 × Hydrofoil stabilizer\u003c\/li\u003e\n    \u003cli\u003e4 sets of stainless-steel screws and nuts\u003c\/li\u003e\n    \u003cli\u003e1 × 6.5 mm drill bit\u003c\/li\u003e\n    \u003cli\u003e1 × Installation instruction sheet\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eCenter the hydrofoil on the outboard’s anti-cavitation plate and check that the selected position will not interfere with steering or propulsion components.\u003c\/li\u003e\n    \u003cli\u003eUse the hydrofoil as a template to mark the four mounting-hole locations.\u003c\/li\u003e\n    \u003cli\u003eRemove the hydrofoil and carefully drill the four holes with the included 6.5 mm drill bit.\u003c\/li\u003e\n    \u003cli\u003ePosition the hydrofoil on the plate and align the holes.\u003c\/li\u003e\n    \u003cli\u003eInsert the stainless-steel screws from the top and secure them with the nuts underneath. Tighten evenly without overtightening or deforming the plate.\u003c\/li\u003e\n    \u003cli\u003eBefore operation, confirm that all hardware is secure and that the hydrofoil does not contact the propeller, rudder, trim mechanism, or other moving parts.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill this fit my specific boat model?\u003c\/summary\u003e\n    \u003cp\u003eFitment is determined primarily by the outboard motor and the shape and dimensions of its anti-cavitation plate, not by the boat model alone. Check the engine brand, horsepower, stroke type, exact model, and available mounting area before installation.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow can a hydrofoil improve performance?\u003c\/summary\u003e\n    \u003cp\u003eThe whale-tail profile adds lift at the stern and may help reduce bow rise, improve low-speed control, and bring a boat onto plane more quickly. Results vary with the boat, load, propeller, engine setup, and operating conditions.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs drilling into the anti-cavitation plate required?\u003c\/summary\u003e\n    \u003cp\u003eYes. This design uses drilled mounting holes and the supplied screws and nuts. Installation should be completed carefully, with the hydrofoil centered and clear of the propeller and other moving parts.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan this stabilizer affect top speed?\u003c\/summary\u003e\n    \u003cp\u003eAny hydrofoil can increase drag and may slightly affect top speed or handling on some boats. Check the installation, alignment, and engine trim if performance changes unexpectedly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat maintenance is required?\u003c\/summary\u003e\n    \u003cp\u003ePeriodically check the mounting screws and nuts for tightness and inspect the hydrofoil for cracks, deformation, or impact damage. Recheck the hardware after the first operating session and after use in rough conditions.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is an aftermarket hydrofoil stabilizer. Brand and reference names shown above are provided only for comparison and application research.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat should I do if the dimensions do not match?\u003c\/summary\u003e\n    \u003cp\u003eDo not drill or install the hydrofoil if the mounting area, hole pattern, clearance, or product dimensions do not match your engine. Choose a product designed for the specific application instead.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eConfirm the engine application and physical dimensions before purchase and installation.\u003c\/li\u003e\n    \u003cli\u003eDo not install the hydrofoil where it can contact the propeller, steering system, trim mechanism, or other moving components.\u003c\/li\u003e\n    \u003cli\u003eUse appropriate eye protection and safe drilling practices during installation.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended if you are not experienced with drilling and outboard hardware.\u003c\/li\u003e\n    \u003cli\u003eInspect the mounting hardware and hydrofoil before each period of regular use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMarine Replacement Parts\u003c\/strong\u003e — Practical aftermarket components for common marine applications.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication-Focused Support\u003c\/strong\u003e — Verify model, dimensions, and installation requirements before ordering.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eQuality-Controlled Supply\u003c\/strong\u003e — Products are selected for dependable use in ordinary marine service conditions.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718271373627,"sku":"SS-20HS001-B","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/SS-20HS001-B.png?v=1762958743"},{"product_id":"thermostat-gasket-kit-fits-mercury-marine-8-35-hp-replaces-855676002-8m0119207","title":"Thermostat \u0026 Gasket Kit for Mercury Marine 8–35 HP 4-Stroke Outboards – Replaces 855676002 and 8M0119207","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis aftermarket \u003cstrong\u003ethermostat and gasket kit\u003c\/strong\u003e is intended for selected Mercury Marine 8–35 HP 4-Stroke outboard motors and replaces the listed Mercury reference numbers. The supplied application information covers selected 209cc two-cylinder and three-cylinder engines, including certain Mercury, Tohatsu, and Nissan 4-Stroke models that use a 60°C (140°F) thermostat.\u003c\/p\u003e\n\u003cp\u003eBecause fitment can vary by model designation, production year, engine configuration, and serial number, compare the part number and application details with your original component before ordering. The references below are provided for identification and interchange checking; they do not replace confirmation against the specific engine serial number.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement thermostat service kit for selected marine 4-Stroke applications.\u003c\/li\u003e\n  \u003cli\u003e60°C (140°F) thermostat rating.\u003c\/li\u003e\n  \u003cli\u003eIncludes the thermostat, thermostat-cover gasket, and rubber ring seal listed below.\u003c\/li\u003e\n  \u003cli\u003eDesigned as an aftermarket direct-replacement solution where the listed references and fitment conditions match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse the following manufacturer and aftermarket references to help compare your existing part.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e855676002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0119207\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0139434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e855676005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-43175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMallory\u003c\/td\u003e\n\u003ctd\u003e9-43175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003e3NV010300M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003e3R3-01030-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003e3R3010300M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe applications below reflect the supplied fitment information. Confirm the complete model, year, stroke, configuration, and serial-number range before installation.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel or Configuration\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eApplicable Reference\u003c\/th\u003e\n\u003cth\u003eSerial or Application Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R042475 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e9.9\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R042475 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eCarbureted, 2-cylinder\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R235949 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eSeaPro\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R051685 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eCarbureted, 2-cylinder\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R235168 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R106999 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eJet EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R165086 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eSeaPro\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial R051710 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–2012\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSerial T409000–1B226999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eSeaPro\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSelected 209cc models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005–present\u003c\/td\u003e\n\u003ctd\u003e855676002 \/ 8M0119207\u003c\/td\u003e\n\u003ctd\u003eSelected 209cc models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eVarious listed applications\u003c\/td\u003e\n\u003ctd\u003e8–30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003ctd\u003e3NV010300M \/ 3R3-01030-0\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n  \u003cdd\u003eThermostat and gasket kit\u003c\/dd\u003e\n  \u003cdt\u003eThermostat Rating\u003c\/dt\u003e\n  \u003cdd\u003e60°C (140°F)\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n  \u003cdd\u003eSelected Mercury Marine, Tohatsu, and Nissan 4-Stroke outboards\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n  \u003cdd\u003eReplacement installation; verify the application before fitting\u003c\/dd\u003e\n  \u003cdt\u003eProduct Status\u003c\/dt\u003e\n  \u003cdd\u003eAftermarket replacement, not an OEM-branded component\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 60°C (140°F) thermostat, replacing the listed 855676002 \/ 8M0119207 references\u003c\/li\u003e\n  \u003cli\u003e1 × thermostat-cover gasket, listed as replacing 27-853702005\u003c\/li\u003e\n  \u003cli\u003e1 × rubber ring seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eConfirm the engine model, stroke, horsepower, year, serial number, and existing thermostat reference before starting.\u003c\/li\u003e\n  \u003cli\u003eSwitch off the engine and allow it to cool completely.\u003c\/li\u003e\n  \u003cli\u003eFollow the engine manufacturer’s service procedure for access to the thermostat housing.\u003c\/li\u003e\n  \u003cli\u003eRemove the thermostat cover and note the orientation of the original thermostat, gasket, and seal.\u003c\/li\u003e\n  \u003cli\u003eRemove all old sealing material and clean the mating surfaces without damaging the housing or cover.\u003c\/li\u003e\n  \u003cli\u003eInstall the replacement thermostat, gasket, and rubber ring seal in the correct orientation.\u003c\/li\u003e\n  \u003cli\u003eReinstall the cover and tighten the fasteners to the manufacturer’s specified torque.\u003c\/li\u003e\n  \u003cli\u003eOperate the engine using the appropriate water-supply or test procedure for the outboard.\u003c\/li\u003e\n  \u003cli\u003eCheck for leakage and confirm that the engine reaches and maintains its normal operating temperature.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eInstallation should be performed by a qualified technician when the correct service procedure, torque values, or cooling-system requirements are not known. Do not add automotive coolant or drain a closed cooling system unless the specific engine design and manufacturer’s service instructions require it.\u003c\/p\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I confirm that this kit fits my engine?\u003c\/summary\u003e\n  \u003cp\u003eMatch the thermostat or kit reference on your existing part with the Part Number Matrix, then confirm the complete engine model, horsepower, stroke, year, configuration, and serial-number range. A model that falls within the general horsepower range is not sufficient by itself.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are common signs of a failing thermostat?\u003c\/summary\u003e\n  \u003cp\u003ePossible symptoms include overheating, the engine running below its normal operating temperature, unstable temperature readings, or leakage near the thermostat housing. Before replacing the thermostat, inspect the water passages, water pump, cooling-system components, and temperature-sensing equipment as appropriate.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs this a 140°F or 60°C thermostat?\u003c\/summary\u003e\n  \u003cp\u003eIt is specified as a 60°C thermostat, which is approximately 140°F.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow often should the thermostat be replaced?\u003c\/summary\u003e\n  \u003cp\u003eThere is no single replacement interval for every outboard. Inspect the thermostat during scheduled cooling-system service and replace it if it is corroded, sticking, damaged, contaminated, or associated with abnormal engine temperature.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\n  \u003cp\u003eNo. This listing is for an aftermarket replacement kit intended for applications where the listed reference numbers and fitment conditions match. Mercury, Tohatsu, Nissan, Sierra, and Mallory names and numbers are used only to identify compatibility or reference applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat should I do if my model appears compatible but the part looks different?\u003c\/summary\u003e\n  \u003cp\u003eDo not install the part until the dimensions, housing arrangement, thermostat rating, gasket shape, and reference number have been confirmed. Contact a qualified marine technician or compare the engine serial number with the manufacturer’s parts information.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWork only on a completely cool engine and follow the engine manufacturer’s service instructions.\u003c\/li\u003e\n  \u003cli\u003eVerify fitment using the complete model and serial-number information before ordering or installing.\u003c\/li\u003e\n  \u003cli\u003eDo not force the thermostat, gasket, or seal into position; incorrect orientation can cause leakage or cooling problems.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement and is not an OEM-branded component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended when the correct service procedure or torque specifications are unavailable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine Parts Focus\u003c\/strong\u003e — Replacement components selected for common marine service applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication-Conscious Listings\u003c\/strong\u003e — Use the listed references and engine conditions to confirm compatibility before purchase.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupport for Routine Maintenance\u003c\/strong\u003e — Replacement parts for keeping compatible outboard cooling systems in service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718271406395,"sku":"jz12111254","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/jz12111254.png?v=1762958744"},{"product_id":"fuel-pump-fits-yamaha-mercury-25-60-hp-4-stroke-replaces-62y-24410-04-00-826398t3","title":"Aftermarket Fuel Pump for Yamaha and Mercury\/Mariner 4-Stroke Outboards, 25–60 HP — Replaces Yamaha 62Y-24410-04-00 and Mercury 826398T3","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis aftermarket fuel pump is intended as a replacement for selected Yamaha and Mercury\/Mariner 4-stroke outboard applications. It is listed for Yamaha applications in the 20–60 HP range and Mercury\/Mariner applications in the 25–60 HP range. Confirm the exact engine model, year, original pump design, connection layout, and part number before ordering.\u003c\/p\u003e\n\u003cp\u003eThe pump is listed as a replacement reference for Yamaha part numbers \u003cstrong\u003e62Y-24410-00-00\u003c\/strong\u003e, \u003cstrong\u003e62Y-24410-01-00\u003c\/strong\u003e, \u003cstrong\u003e62Y-24410-02-00\u003c\/strong\u003e, \u003cstrong\u003e62Y-24410-03-00\u003c\/strong\u003e, and \u003cstrong\u003e62Y-24410-04-00\u003c\/strong\u003e, and Mercury references \u003cstrong\u003e826398A1\u003c\/strong\u003e, \u003cstrong\u003e826398A3\u003c\/strong\u003e, and \u003cstrong\u003e826398T3\u003c\/strong\u003e. These numbers should be compared with the number on the pump being replaced; number co-occurrence alone does not confirm fitment for every engine configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAftermarket replacement fuel pump for selected gasoline outboard applications.\u003c\/li\u003e\n  \u003cli\u003eMetal housing intended for use in marine fuel-system environments.\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement style design; compare mounting, ports, and electrical connections before installation.\u003c\/li\u003e\n  \u003cli\u003eSold as one fuel pump rather than a complete fuel-system assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse these manufacturer and replacement references to help identify the correct pump. Always verify the complete engine application and physical configuration.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eReference Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-01-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-03-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-04-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e826398A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e826398A3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e826398T3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine and Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe application information below summarizes the listed coverage. Yamaha fitment includes selected F20, FT25, F25, F30, F40, F50, FT50, T50, and F60 4-stroke models. The listed Yamaha model-year applications include selected models from 1997 through 2003. Mercury\/Mariner coverage is listed for selected 25–60 HP 4-stroke engines from approximately 1995 through 2004.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Model families can contain different serial-number ranges, electrical systems, fuel-system layouts, and pump revisions. Confirm the exact model code, year, serial number when applicable, original part number, and port arrangement before installation.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Yamaha Compatible Model Families\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eListed model families\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eListed years or range\u003c\/th\u003e\n\u003cth\u003eReference numbers\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify year and model code\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-04-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF25, FT25\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSelected 1998–2003 applications\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00-00 through 62Y-24410-04-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSelected 2001–2002 applications; verify exact model\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00-00 or 62Y-24410-04-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF40\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSelected 1999–2002 applications\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00-00 or 62Y-24410-04-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF50, FT50, T50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSelected 1997–2002 applications\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00-00 or 62Y-24410-04-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF60\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify year and model code\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-04-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Mercury and Mariner Compatible Applications\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eListed year range\u003c\/th\u003e\n\u003cth\u003eReference numbers\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e25–60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSelected 1995–2004 applications\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, 826398T3\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eAftermarket fuel pump\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eSelected gasoline 4-stroke outboard fuel systems\u003c\/dd\u003e\n  \u003cdt\u003eInstallation Style\u003c\/dt\u003e\n\u003cdd\u003eDirect-replacement style; verify physical and electrical compatibility\u003c\/dd\u003e\n  \u003cdt\u003eConnection Layout\u003c\/dt\u003e\n\u003cdd\u003e1 inlet and 2 outlets, as listed for this replacement design\u003c\/dd\u003e\n  \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eMetal\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003eApproximately 0.33 kg (0.73 lb)\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eBarbed outlets and threaded inlet, as listed\u003c\/dd\u003e\n  \u003cdt\u003eOutlet Connection Size\u003c\/dt\u003e\n\u003cdd\u003eApproximately 0.5 inch\u003c\/dd\u003e\n  \u003cdt\u003eInlet Connection Size\u003c\/dt\u003e\n\u003cdd\u003eApproximately 0.5 inch\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x aftermarket fuel pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a single replacement pump, not a complete pump assembly or engine fuel-system kit. Hose clamps, clips, O-rings, mounting hardware, and other installation parts should not be assumed unless they are specifically shown or stated in the order details. Reuse hardware only when it is serviceable and approved for the application.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the negative battery terminal and follow all applicable marine fuel-system safety procedures.\u003c\/li\u003e\n  \u003cli\u003eRelieve fuel-system pressure according to the engine service manual before disconnecting any fuel line.\u003c\/li\u003e\n  \u003cli\u003eWork in a well-ventilated area away from flames, sparks, heat, and ignition sources. Use absorbent towels to control spilled fuel.\u003c\/li\u003e\n  \u003cli\u003ePhotograph or label the original hose and electrical-connector positions before removing the old pump.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the fuel lines and electrical connector, then remove the original mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement pump with the original unit, including mounting points, inlet and outlet positions, thread size, hose-barb size, and electrical connections.\u003c\/li\u003e\n  \u003cli\u003eInstall only the correct fuel-resistant seals and hardware for the engine. Do not force mismatched fittings or alter the fuel-system configuration.\u003c\/li\u003e\n  \u003cli\u003eSecure the replacement pump with suitable hardware and reconnect each line and electrical connection to the correct port.\u003c\/li\u003e\n  \u003cli\u003eReconnect the battery, prime the fuel system as specified by the service manual, and inspect carefully for leaks before starting the engine.\u003c\/li\u003e\n  \u003cli\u003eAfter starting, recheck for fuel leakage and abnormal pump noise. Stop immediately if a leak or connection problem is found.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting and FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I confirm this fuel pump is correct?\u003c\/summary\u003e\n  \u003cp\u003eCompare the original pump's manufacturer number, engine brand, model code, horsepower, stroke, year, serial-number range when applicable, connector, mounting arrangement, and inlet\/outlet configuration. A visual comparison and service-manual check are recommended before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat symptoms can indicate a failing fuel pump?\u003c\/summary\u003e\n  \u003cp\u003ePossible symptoms include hard starting, stalling, hesitation, loss of power, poor operation at higher throttle, or inadequate fuel delivery. These symptoms can also result from blocked filters, restricted hoses, wiring faults, fuel contamination, or other engine problems, so diagnose the complete system before replacing the pump.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes this pump have a fixed replacement interval?\u003c\/summary\u003e\n  \u003cp\u003eFuel pumps are generally replaced when testing shows a fault or when performance has degraded. Follow the engine manufacturer's inspection and maintenance schedule, and address fuel contamination or restrictions that could damage a replacement pump.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\n  \u003cp\u003eNo. This listing is for an aftermarket replacement fuel pump. The reference numbers are provided for identification and application comparison only; the pump is not represented as an original manufacturer component.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat should I do if the connections do not match?\u003c\/summary\u003e\n  \u003cp\u003eDo not force the installation or modify fuel-system connections to make the pump fit. Stop installation and compare the original part, engine service information, and the applicable reference number.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety and Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the complete application before purchase and installation; horsepower alone is not sufficient to confirm fitment.\u003c\/li\u003e\n  \u003cli\u003eUse only fuel-system-compatible hoses, seals, clamps, and fittings.\u003c\/li\u003e\n  \u003cli\u003eNever operate the engine when fuel is leaking or when fuel vapors are present.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended if you are not experienced with marine fuel systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMarine replacement parts selected for practical repair and maintenance applications.\u003c\/li\u003e\n  \u003cli\u003eProduct information is provided to support part-number and application comparison.\u003c\/li\u003e\n  \u003cli\u003eFor the safest result, confirm the original component and complete engine specifications before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723793666363,"sku":"MY-17FP-003","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/MY-17FP-003.png?v=1763031934"},{"product_id":"fuel-pump-fits-yamaha-mercury-4-stroke-25-60-hp-replaces-62y-24410-02-826398a3","title":"Fuel Pump – Fits Yamaha \u0026 Mercury 4-Stroke 25–60 HP (Replaces 62Y-24410-02, 826398A3)","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis aftermarket electric \u003cstrong\u003efuel pump is listed for Yamaha and Mercury 4-stroke outboard engines from 25 to 60 HP\u003c\/strong\u003e. It is intended as a replacement for applications using the compatible manufacturer part numbers listed below. Confirm your exact engine model, year, serial number, pump configuration, and mounting arrangement before ordering.\u003c\/p\u003e\n\u003cp\u003eThe listed Yamaha reference numbers are 62Y-24410-00, 62Y-24410-01, 62Y-24410-02, 62Y-24410-03, and 62Y-24410-04. The listed Mercury reference numbers are 826398A1, 826398A3, and 826398T3.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElectric fuel pump for gasoline outboard applications.\u003c\/li\u003e\n  \u003cli\u003eEngine-mounted flange-mount design.\u003c\/li\u003e\n  \u003cli\u003eTwo-outlet, one-inlet connection arrangement as listed for this replacement.\u003c\/li\u003e\n  \u003cli\u003eIncludes an O-ring and two clamps\/clips for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse the matrix below to compare the manufacturer reference numbers associated with this replacement pump. A number match should be confirmed against the complete engine model and serial-number range.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-01\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-02\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-03\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-04\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e826398A1\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e826398A3\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e826398T3\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe listed application range covers Yamaha 4-stroke outboards from 20 to 60 HP and Mercury 4-stroke EFI outboards from 25 to 60 HP. The product title focuses on the 25–60 HP range. Model, year, serial number, stroke, fuel system, and physical configuration must all be checked before installation.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eListed Years\u003c\/th\u003e\n\u003cth\u003eManufacturer Reference\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF25\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eFT25\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF40\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eFT50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eF60\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e62Y-24410-00 through 62Y-24410-04\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF25\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF35\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF40\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF45\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF55\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF60\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke EFI\u003c\/td\u003e\n\u003ctd\u003e2001–Present\u003c\/td\u003e\n\u003ctd\u003e826398A1, 826398A3, or 826398T3\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial range.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eElectric fuel pump\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eEngine-mounted, flange mount\u003c\/dd\u003e\n  \u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\u003c\/dd\u003e\n  \u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eTwo outlets and one inlet\u003c\/dd\u003e\n  \u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eMetal\u003c\/dd\u003e\n  \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack with silver accents\u003c\/dd\u003e\n  \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e0.38 kg (13.4 oz)\u003c\/dd\u003e\n  \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eThreaded\u003c\/dd\u003e\n  \u003cdt\u003ePosition\u003c\/dt\u003e\n\u003cdd\u003eUpper\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x electric fuel pump\u003c\/li\u003e\n  \u003cli\u003e2 x clamps\/clips\u003c\/li\u003e\n  \u003cli\u003e1 x O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery and relieve fuel-system pressure according to the engine service manual.\u003c\/li\u003e\n  \u003cli\u003ePlace absorbent rags or a suitable container beneath the pump to catch spilled fuel.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the fuel lines and electrical connector from the old pump.\u003c\/li\u003e\n  \u003cli\u003eRemove the mounting bolts and take out the old pump.\u003c\/li\u003e\n  \u003cli\u003eRemove the old O-ring and clean the engine mounting surface.\u003c\/li\u003e\n  \u003cli\u003eLightly lubricate and install the new O-ring, making sure it is seated correctly.\u003c\/li\u003e\n  \u003cli\u003eMount the replacement pump and tighten the bolts evenly to the manufacturer’s specified torque.\u003c\/li\u003e\n  \u003cli\u003eReconnect the fuel lines and electrical connector, using the supplied clamps where appropriate.\u003c\/li\u003e\n  \u003cli\u003eReconnect the battery.\u003c\/li\u003e\n  \u003cli\u003ePrime the fuel system according to the engine procedure and check carefully for leaks before starting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I confirm that this fuel pump is correct for my motor?\u003c\/summary\u003e\u003cp\u003eCheck the complete engine brand, model, horsepower, stroke, year, and serial number. Then compare the pump’s mounting arrangement, connector layout, and manufacturer reference number with the pump being replaced.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are common signs of a failing fuel pump?\u003c\/summary\u003e\u003cp\u003ePossible symptoms include hard starting or failure to start, sputtering at higher speeds, loss of power under load, hesitation, or unusual pump noise. These symptoms can also have other causes, so test the fuel system before replacing parts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the O-ring included?\u003c\/summary\u003e\u003cp\u003eYes. The package includes one fuel pump, one O-ring, and two clamps\/clips.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM pump?\u003c\/summary\u003e\u003cp\u003eNo. This is an aftermarket replacement intended for applications using the listed manufacturer reference numbers. It is not sold as an OEM component.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I install the pump myself?\u003c\/summary\u003e\u003cp\u003eInstallation may be straightforward for an experienced technician, but fuel-system work involves fire and fuel-leak hazards. Follow the engine service manual and use professional installation if you are not familiar with marine fuel systems.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhen should a fuel pump be replaced?\u003c\/summary\u003e\u003cp\u003eReplace the pump when testing confirms inadequate fuel delivery or when it shows failure symptoms. There is no universal replacement interval for every engine; follow the maintenance guidance for your specific model.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the exact engine model, year, serial number, and reference number before purchase.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement pump’s connections and mounting arrangement with the original part.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery, relieve fuel pressure, prevent ignition sources, and work in a well-ventilated area.\u003c\/li\u003e\n  \u003cli\u003eCheck all connections for leaks before operating the engine.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine Replacement Parts\u003c\/strong\u003e — Replacement components for common marine repair applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment-Focused Shopping\u003c\/strong\u003e — Compare manufacturer reference numbers and complete engine details before ordering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupport for Installation\u003c\/strong\u003e — Follow the appropriate engine service information for safe installation and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723793699131,"sku":"JO-2DH9-A1N8","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/JO-2DH9-A1N8.png?v=1763031935"},{"product_id":"water-pump-impeller-repair-kit-fits-tohatsu-nissan-25-40-hp-2-stroke-replaces-361-87322-0","title":"Water Pump Impeller Repair Kit – Fits Tohatsu\/Nissan 25–40 HP 2-Stroke (Replaces 361-87322-0)","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eWater Pump Impeller Repair Kit\u003c\/strong\u003e is designed for specified Tohatsu and Nissan 25–40 HP 2-stroke outboard engines from the model and year ranges listed below. It also fits select Mercury 25–30 HP 4-stroke EFI engines when the engine model and serial-number conditions in the compatibility table are met.\u003c\/p\u003e\n\u003cp\u003eThe kit is an aftermarket replacement for Tohatsu\/Nissan part number \u003cstrong\u003e361-87322-0\u003c\/strong\u003e and includes the impeller, drive key, wear plate, cup liner, gaskets, bolts, and washers listed in the package contents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit aftermarket replacement\u003c\/li\u003e\n  \u003cli\u003eComponents for servicing the water pump assembly\u003c\/li\u003e\n  \u003cli\u003eCovered by a 1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse the following references to compare the applicable OEM and interchange numbers for your engine.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003e361873220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003e361873220M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e853792A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e853792T01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm the exact engine brand, model, rated horsepower, stroke, year, and serial-number condition before ordering. Compatibility conditions must be considered together.\u003c\/p\u003e\n\u003ch3\u003eTohatsu \u0026amp; Nissan 2-Stroke Applications\u003c\/h3\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Tohatsu and Nissan Engine Compatibility\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eOEM Part No.\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM25C2\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM25C3\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM30A3\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM30A4\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM35C\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM40C\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2004\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS25C2\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS25C3\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS30A3\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS30A4\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS35C\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS40C\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2004\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS40C2\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2004\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eMercury Marine 4-Stroke EFI Applications\u003c\/h3\u003e\n\u003cp\u003eThe Mercury applications below require the listed serial-number range. Do not rely on horsepower alone when checking fitment.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Mercury Marine Engine Compatibility\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eSerial Number\u003c\/th\u003e\n\u003cth\u003eOEM Part No.\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eSea Pro\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R051710 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI Standard\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R106999 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI JET\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R165086 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI Standard\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R106999 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eWater pump impeller repair kit\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eOutboard water pump service\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect-fit aftermarket replacement\u003c\/dd\u003e\n  \u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eMarine-grade replacement materials\u003c\/dd\u003e\n  \u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003e1 year\u003c\/dd\u003e\n  \u003cdt\u003eManufacturing Standard\u003c\/dt\u003e\n\u003cdd\u003eProduced in an ISO 9002 certified factory\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Water pump impeller (345-65021-0 \/ 47-161541)\u003c\/li\u003e\n  \u003cli\u003e1 × Driveshaft key (332-65022-0)\u003c\/li\u003e\n  \u003cli\u003e1 × Stainless-steel wear plate (348-65025-0)\u003c\/li\u003e\n  \u003cli\u003e1 × Stainless-steel cup liner (348-65011-0)\u003c\/li\u003e\n  \u003cli\u003e1 × Gasket set\u003c\/li\u003e\n  \u003cli\u003e4 × Bolts with washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery and remove the engine cover.\u003c\/li\u003e\n  \u003cli\u003eDrain the lower-unit gear lubricant.\u003c\/li\u003e\n  \u003cli\u003eRemove the lower unit from the outboard.\u003c\/li\u003e\n  \u003cli\u003eUnbolt and remove the existing water-pump housing.\u003c\/li\u003e\n  \u003cli\u003eInspect the housing and clean all mating surfaces.\u003c\/li\u003e\n  \u003cli\u003eInstall the impeller, gaskets, wear plate, and cup liner supplied with the kit. Make sure the driveshaft key is correctly seated.\u003c\/li\u003e\n  \u003cli\u003eReassemble the water-pump housing and torque the bolts to the engine manufacturer’s specifications.\u003c\/li\u003e\n  \u003cli\u003eReinstall the lower unit and refill it with the correct gear lubricant.\u003c\/li\u003e\n  \u003cli\u003eReconnect the battery and test the cooling system, confirming a steady tell-tale stream.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I know if this kit fits my engine?\u003c\/summary\u003e\u003cp\u003eCompare your engine brand, exact model, horsepower, stroke, year, and serial number with the tables above. Also compare the original water-pump part number. Mercury applications require particular attention to the listed serial-number range.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the signs of a failing water-pump impeller?\u003c\/summary\u003e\u003cp\u003eCommon signs include overheating at idle or low speed, a weak or missing tell-tale stream, and a dry, cracked, or brittle impeller. A worn housing or wear plate can also reduce water-pump performance.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow often should the water pump be serviced?\u003c\/summary\u003e\u003cp\u003eAs a preventative-maintenance guideline, inspect and replace the impeller and gaskets every 1–2 years or every 100–200 hours of use. Service may be needed sooner in saltwater or sandy and silty conditions.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\u003cp\u003eNo. This listing is for an aftermarket replacement kit, not an OEM component. The listed OEM and interchange numbers are provided only for reference and fitment comparison.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the shipping and warranty terms?\u003c\/summary\u003e\u003cp\u003eTypical transit is 5–15 days, with standard shipping free to most regions. Expedited options may be available at checkout. The product includes a 1-year warranty against manufacturing defects under normal use. Returns are accepted according to the applicable return policy when the item is unused and in its original condition.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the exact engine model, year, stroke, horsepower, serial number, and original part number before ordering.\u003c\/li\u003e\n  \u003cli\u003eDo not operate an outboard with an overheating engine or an inadequate tell-tale stream.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement kit, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended when you are not familiar with lower-unit removal or water-pump service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered for dependable real-world service.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery is available to most regions, with typical transit of 5–15 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing supported by consistent materials and quality-control processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723800580411,"sku":"DK0c98KT025","price":39.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/DK0c98KT025.png?v=1763032151"},{"product_id":"water-pump-impeller-kit-fits-mercury-marine-25-30-hp-tohatsu-nissan-25-40-hp-replaces-853792a07-361873220","title":"Water Pump Impeller Service Kit for Mercury 25–30 HP 4-Stroke EFI and Compatible Tohatsu\/Nissan Outboards — Replaces 853792A07 and 361-87322-0","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis aftermarket \u003cstrong\u003ewater pump impeller service kit\u003c\/strong\u003e is designed for selected Mercury, Mariner and Force 25–30 HP 4-stroke EFI outboards and compatible Tohatsu\/Nissan applications. It is intended to restore water-pump performance and help maintain proper engine cooling when the existing impeller, gasket, wear components or related service parts are worn.\u003c\/p\u003e\n\u003cp\u003eThe kit is listed as a replacement for Mercury reference numbers \u003cstrong\u003e853792A07\u003c\/strong\u003e, \u003cstrong\u003e853792A1\u003c\/strong\u003e and \u003cstrong\u003e853792T01\u003c\/strong\u003e, together with Tohatsu\/Nissan references \u003cstrong\u003e361-87322-0\u003c\/strong\u003e, \u003cstrong\u003e361873220M\u003c\/strong\u003e and \u003cstrong\u003e361873220\u003c\/strong\u003e. These numbers should be compared with the number and configuration of the parts removed from your engine before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAftermarket water pump impeller service kit for selected outboard applications.\u003c\/li\u003e\n  \u003cli\u003eIncludes an impeller and related water-pump service components listed below.\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct replacement where the listed reference number and engine conditions match.\u003c\/li\u003e\n  \u003cli\u003eImpeller reference 345-65021-0 is cataloged for selected 25–30 HP Tohatsu applications and related 25–35 HP impeller applications; complete kit fitment remains dependent on the engine model and water-pump assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse the following references to compare the kit with the part being replaced. A reference number alone does not confirm fitment for every engine variant.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand or Type\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e853792A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e853792T01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu \/ Nissan\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu \/ Nissan\u003c\/td\u003e\n\u003ctd\u003e361873220M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu \/ Nissan\u003c\/td\u003e\n\u003ctd\u003e361873220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAftermarket impeller reference\u003c\/td\u003e\n\u003ctd\u003e345-65021-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAftermarket impeller reference\u003c\/td\u003e\n\u003ctd\u003e47-16154-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAftermarket impeller reference\u003c\/td\u003e\n\u003ctd\u003e161541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine and Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eConfirm the complete engine model, stroke, production year and serial-number range before installation. Mercury fitment is commonly controlled by serial number rather than year alone. The model entries below are application leads and should be checked against the service-manual diagram or the original water-pump parts before purchase.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears \/ Serial No.\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eSea Pro\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R051710 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI Standard\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R106999 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI JET\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R165086 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eEFI Standard\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0R106999 and up\u003c\/td\u003e\n\u003ctd\u003e853792A07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM25C2\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM25C3\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM30A3\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM30A4\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM35C\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu\u003c\/td\u003e\n\u003ctd\u003eM40C\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2004\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS25C2\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS25C3\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS30A3\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS30A4\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS35C\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS40C\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2004\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNS40C2\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e2002–2004\u003c\/td\u003e\n\u003ctd\u003e361-87322-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTohatsu \/ Nissan\u003c\/td\u003e\n\u003ctd\u003eSelected 25–30 HP models\u003c\/td\u003e\n\u003ctd\u003e25–30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify exact model and year\u003c\/td\u003e\n\u003ctd\u003eCheck the complete water-pump assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eWater pump impeller service kit\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eReplacement water-pump service component\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eSelected gasoline outboard engines\u003c\/dd\u003e\n  \u003cdt\u003eImpeller Material\u003c\/dt\u003e\n\u003cdd\u003eMarine-grade neoprene rubber\u003c\/dd\u003e\n  \u003cdt\u003eIncluded Service Materials\u003c\/dt\u003e\n\u003cdd\u003eGaskets and metal water-pump service components as listed below\u003c\/dd\u003e\n  \u003cdt\u003eImpeller Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n  \u003cdt\u003eApproximate Weight\u003c\/dt\u003e\n\u003cdd\u003e130 g (4.6 oz), as listed\u003c\/dd\u003e\n  \u003cdt\u003eProduct Status\u003c\/dt\u003e\n\u003cdd\u003eAftermarket replacement; not an OEM-manufactured component\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Water pump impeller, reference 345-65021-0 \/ 47-16154-1 \/ 161541\u003c\/li\u003e\n  \u003cli\u003e1 x Impeller key, reference 28-161582 \/ 348-65018\u003c\/li\u003e\n  \u003cli\u003e1 x Gasket, reference 278-161602 \/ 348-65029-1\u003c\/li\u003e\n  \u003cli\u003e1 x Gasket, reference 27-161582 \/ 348-65018-0\u003c\/li\u003e\n  \u003cli\u003e1 x Insert cup, reference 161572 \/ 348-65011-0\u003c\/li\u003e\n  \u003cli\u003e1 x Wear plate, reference 161592 \/ 348-65025-0\u003c\/li\u003e\n  \u003cli\u003e4 x Bolts and washers, reference 910103-565\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePackage contents may vary by production batch. Compare the supplied components with the water-pump parts removed from your engine before beginning installation.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery and remove the engine cover where applicable.\u003c\/li\u003e\n  \u003cli\u003ePlace the engine securely and remove the lower unit according to the manufacturer's service procedure.\u003c\/li\u003e\n  \u003cli\u003eRemove the water-pump housing and retain the original fasteners for comparison.\u003c\/li\u003e\n  \u003cli\u003eRemove the old impeller, key, gaskets, cup and wear plate as applicable.\u003c\/li\u003e\n  \u003cli\u003eClean the mating surfaces and inspect the housing, drive key, shaft and fasteners for wear or corrosion.\u003c\/li\u003e\n  \u003cli\u003eInstall the replacement components in the same order as the original parts, with the impeller key correctly seated.\u003c\/li\u003e\n  \u003cli\u003eLubricate the impeller and housing with a suitable water-pump assembly lubricant; do not use petroleum products that may damage the rubber.\u003c\/li\u003e\n  \u003cli\u003eReassemble the water pump and lower unit. Tighten fasteners to the engine manufacturer's specifications.\u003c\/li\u003e\n  \u003cli\u003eTest-run the engine in an appropriate water supply and confirm a steady tell-tale stream before normal operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting and FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I confirm fitment for a Mercury engine?\u003c\/summary\u003e\u003cp\u003eUse the engine's complete model and serial number. Compare the serial range, water-pump diagram and original part number rather than relying on horsepower alone.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are common signs of a worn impeller?\u003c\/summary\u003e\u003cp\u003eSymptoms can include a weak or missing tell-tale stream, overheating warnings, fluctuating cooling-water flow, or a damaged, melted or deformed impeller.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow often should the impeller be inspected?\u003c\/summary\u003e\u003cp\u003eInspect the impeller during scheduled maintenance and replace it when damaged, hardened, cracked or deformed. Service intervals depend on operating hours, storage conditions and saltwater exposure; follow the engine manufacturer's maintenance schedule.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill this fit every Tohatsu or Nissan 25–40 HP engine?\u003c\/summary\u003e\u003cp\u003eNo. Tohatsu and Nissan engines can use different water-pump designs across model, year and serial-number ranges. Verify the exact model, stroke and original water-pump reference before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\u003cp\u003eNo. This is an aftermarket replacement kit intended to replace the listed OEM and manufacturer reference numbers where the application matches.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat should I do if my original components look different?\u003c\/summary\u003e\u003cp\u003eDo not force installation. Compare the complete water-pump assembly, shaft key, housing, cup, wear plate and gasket pattern with the supplied parts before use.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety and Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the engine model, year, stroke, serial number and original part number before purchase.\u003c\/li\u003e\n  \u003cli\u003eDo not operate an outboard without a reliable cooling-water supply.\u003c\/li\u003e\n  \u003cli\u003eUse appropriate lifting, support and lower-unit removal procedures.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended if you are unfamiliar with outboard lower-unit service.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — Marine replacement parts selected for dependable service in real-world operating conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlobal Fulfillment\u003c\/strong\u003e — Standard and expedited delivery options are shown at checkout where available.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Practical replacement solutions with clear application and part-number information.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723800613179,"sku":"UY-YSF0-9STY","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/UY-YSF0-9STY.png?v=1763032152"},{"product_id":"water-pump-impeller-service-kit-fits-mercury-marine-tohatsu-nissan-25-40-hp-replaces-47-16154-1-3r0-65021-0-345-65021-0","title":"Water Pump Impeller Service Kit for Mercury Marine and Tohatsu\/Nissan 25–40 HP Outboards – Replaces 47-16154-1, 3R0-65021-0 and 345-65021-0","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003ewater pump impeller service kit\u003c\/strong\u003e is designed for select Mercury Marine 25–30 HP 4-Stroke Sea Pro and Lightning outboard models, as well as a range of Tohatsu and Nissan 25–40 HP 2-Stroke and 25–30 HP 4-Stroke outboard engines. It provides the primary replacement components needed to service the water pump and maintain proper engine cooling.\u003c\/p\u003e\n\u003cp\u003eThis aftermarket kit is listed as a replacement for Mercury part \u003cstrong\u003e47-16154-1\u003c\/strong\u003e and Tohatsu\/Nissan parts \u003cstrong\u003e345-65021-0\u003c\/strong\u003e and \u003cstrong\u003e3R0-65021-0\u003c\/strong\u003e. It also cross-references Sierra 18-8923, Mallory 9-45400 and CEF 500382. Confirm the part number, model, year and serial-number range before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement water pump impeller service kit for selected Mercury, Tohatsu and Nissan outboards.\u003c\/li\u003e\n  \u003cli\u003eNeoprene rubber impeller with a durable nylon hub.\u003c\/li\u003e\n  \u003cli\u003eIncludes the impeller, key and water pump housing gaskets required for the listed service application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse the following references to compare the listed OEM and aftermarket numbers with the number on your original component or service manual.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury Marine\u003c\/td\u003e\n\u003ctd\u003e47-16154-1\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003e345-65021-0 \/ 345650210 \/ 345-65021-0M \/ 345650210M\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003e3R0-65021-0 \/ 3R0650210 \/ 3R0-65021-0M \/ 3R0650210M\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-8923\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMallory\u003c\/td\u003e\n\u003ctd\u003e9-45400\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eCEF\u003c\/td\u003e\n\u003ctd\u003e500382\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eFitment depends on the complete engine configuration. Match the engine brand, model, year, stroke, horsepower and serial-number range against the information below and verify the replacement number in your service manual before installation.\u003c\/p\u003e\n\u003cp\u003eFor Mercury Marine applications, the listed fitment includes select 25–30 HP 4-Stroke Sea Pro and Lightning models from 2005 and newer.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Mercury Marine Engine Compatibility\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eOEM Part No.\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eSea Pro\u003c\/td\u003e\n\u003ctd\u003e25 EFI JET\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005 and newer\u003c\/td\u003e\n\u003ctd\u003e47-16154-1\u003c\/td\u003e\n\u003ctd\u003eS\/N 0N055505 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eLightning\u003c\/td\u003e\n\u003ctd\u003e30 EFI JET\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2005 and newer\u003c\/td\u003e\n\u003ctd\u003e47-16154-1\u003c\/td\u003e\n\u003ctd\u003eS\/N 0G575500 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe listed Tohatsu and Nissan applications include selected 25–40 HP 2-Stroke and 25–30 HP 4-Stroke outboard engines manufactured approximately between 1996 and 2005.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Tohatsu and Nissan Engine Compatibility\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eOEM Part No.\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003eNS25C, M25C\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e345-65021-0\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003eNS30A, M30A\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e345-65021-0\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003eNS35C, M35C\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e345-65021-0\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003eNS40C, M40C\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e345-65021-0\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003eNSF25A, NSF25B, MFS25A, MFS25B, MFS25C\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e345-65021-0\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eTohatsu\/Nissan\u003c\/td\u003e\n\u003ctd\u003eNSF30A, NSF30B, MFS30A, MFS30B, MFS30C\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2005\u003c\/td\u003e\n\u003ctd\u003e345-65021-0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eWater pump impeller service kit\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect replacement for the listed applications\u003c\/dd\u003e\n  \u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003eNeoprene rubber impeller with nylon hub\u003c\/dd\u003e\n  \u003cdt\u003eNumber of Blades\u003c\/dt\u003e\n\u003cdd\u003e6\u003c\/dd\u003e\n  \u003cdt\u003eImpeller Height\u003c\/dt\u003e\n\u003cdd\u003e20.3 mm (0.80 inch)\u003c\/dd\u003e\n  \u003cdt\u003eOverall Diameter\u003c\/dt\u003e\n\u003cdd\u003e44.1 mm (1.74 inch)\u003c\/dd\u003e\n  \u003cdt\u003eHub Shaft Diameter\u003c\/dt\u003e\n\u003cdd\u003e17.1 mm (0.67 inch)\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Water pump impeller, cross-referenced to 345-65021-0, 47-16154-1 and 161541\u003c\/li\u003e\n  \u003cli\u003e1 x Impeller key, 332-65022-0\u003c\/li\u003e\n  \u003cli\u003e2 x Water pump housing gaskets\u003c\/li\u003e\n  \u003cli\u003e1 x Installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery and shut off the fuel supply for safety.\u003c\/li\u003e\n  \u003cli\u003eRemove the lower unit or gearcase according to the engine manufacturer’s service procedure.\u003c\/li\u003e\n  \u003cli\u003eUnbolt and carefully remove the water pump housing cover.\u003c\/li\u003e\n  \u003cli\u003eNote the rotational direction of the old impeller blades before removal.\u003c\/li\u003e\n  \u003cli\u003eRemove the old impeller, impeller key and used gaskets.\u003c\/li\u003e\n  \u003cli\u003eClean the housing interior and wear plate, and inspect them for grooves, cracks or other damage.\u003c\/li\u003e\n  \u003cli\u003eInstall the new gasket and impeller key onto the driveshaft.\u003c\/li\u003e\n  \u003cli\u003eSlide the new impeller onto the driveshaft while turning the shaft in the correct direction so the blades seat properly in the housing.\u003c\/li\u003e\n  \u003cli\u003eReinstall the water pump housing and tighten the bolts to the manufacturer’s specified torque.\u003c\/li\u003e\n  \u003cli\u003eReattach the lower unit, ensuring that the water tube and shift shaft are correctly aligned.\u003c\/li\u003e\n  \u003cli\u003eTest the engine with an appropriate water supply and verify a strong, steady stream from the tell-tale outlet.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I know if this impeller kit fits my engine?\u003c\/summary\u003e\u003cp\u003eMatch the engine brand, model, year, horsepower, stroke and serial-number range against the compatibility information. Also compare the OEM or aftermarket replacement number in your service manual with the numbers in the Part Number Matrix. If any detail differs, confirm fitment before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the signs of a failing water pump impeller?\u003c\/summary\u003e\u003cp\u003eCommon symptoms include a weak or intermittent tell-tale stream, overheating alarms or reduced cooling performance. Inspection may reveal blades that are cracked, brittle, melted or missing pieces.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow often should I replace the impeller?\u003c\/summary\u003e\u003cp\u003eInspect the impeller as part of routine maintenance. Replacement intervals vary with engine use and operating conditions; more frequent service may be appropriate for engines used in saltwater or sandy and silty environments.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this part the same as the original OEM version?\u003c\/summary\u003e\u003cp\u003eThis is an aftermarket replacement, not an OEM component. It is listed as a replacement for the referenced OEM numbers and is supplied with the components shown in the What’s in the Box section.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eOEM vs. aftermarket?\u003c\/summary\u003e\u003cp\u003eThis listing is for an aftermarket replacement. Compare the dimensions, replacement numbers and complete engine fitment information before installation.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eShipping speed and cost?\u003c\/summary\u003e\u003cp\u003eTypical transit is 5–15 days. Standard shipping is free, and expedited options appear at checkout where available.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWarranty and returns?\u003c\/summary\u003e\u003cp\u003eThis product is covered by a 1-year warranty against manufacturing defects under normal use. Returns are accepted within the standard return window when the item is unused and in its original condition. Contact support for current policy details and return instructions.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the original part number, dimensions and complete engine fitment information before purchase.\u003c\/li\u003e\n  \u003cli\u003eDo not operate the engine without an adequate water supply.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended when you are not familiar with lower-unit or water-pump service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts designed for dependable service in real-world operating conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery is available to most regions, typically within 5–15 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing with attention to materials and quality control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723800645947,"sku":"24KM104-QM","price":19.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/24KM104-QM.png?v=1763032154"},{"product_id":"fuel-pump-assembly-fits-mercury-mariner-25-60-hp-4-stroke-outboards-replaces-881862t1-892874t01-899106t01","title":"Fuel Pump Assembly – Fits Mercury\/Mariner 25–60 HP 4-Stroke Outboards (Replaces 881862T1, 892874T01, 899106T01)","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis aftermarket \u003cstrong\u003efuel pump assembly\u003c\/strong\u003e is intended as a direct replacement for selected Mercury and Mariner 25–60 HP four-stroke outboards. It is designed to restore fuel delivery on applicable EFI models while using the engine's existing mounting arrangement, fuel connections, and electrical system.\u003c\/p\u003e\n\u003cp\u003eThe replacement references associated with this listing include Mercury \u003cstrong\u003e881862T1\u003c\/strong\u003e, \u003cstrong\u003e892874T01\u003c\/strong\u003e, and \u003cstrong\u003e899106T01\u003c\/strong\u003e. Because fuel-pump fitment can vary by exact model, production year, configuration, and serial-number range, compare your original pump and verify the engine details before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-replacement fuel pump assembly for applicable Mercury and Mariner four-stroke outboards.\u003c\/li\u003e\n\u003cli\u003eDesigned for a straightforward installation using the existing fuel-system and electrical connections.\u003c\/li\u003e\n\u003cli\u003eSuitable for gasoline\/petrol marine fuel systems; confirm fuel-system requirements for your specific engine.\u003c\/li\u003e\n\u003cli\u003eAftermarket replacement component; not manufactured or sold by Mercury or Mariner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eThe following numbers are reference and cross-reference information associated with this replacement. Always compare the original component and confirm exact engine fitment before installation.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e881862T1, 881862T07, 881862T08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e892874T, 892874T01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e899106T, 899106T01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0118176, 8M0118177, 8M0141827, 8M0141844\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-8866\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWSM\u003c\/td\u003e\n\u003ctd\u003e600-092\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis listing is intended for selected \u003cstrong\u003eMercury and Mariner 25–60 HP four-stroke outboards\u003c\/strong\u003e, including applicable EFI configurations. The exact fitment may depend on the engine's model designation, year, configuration, and serial number. The horsepower range alone is not sufficient to confirm compatibility.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eHorsepower range\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eFitment note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e25–60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSelected EFI outboards\u003c\/td\u003e\n\u003ctd\u003eVerify exact model, year, configuration, and serial number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003e25–60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eSelected EFI outboards\u003c\/td\u003e\n\u003ctd\u003eVerify exact model, year, configuration, and serial number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Do not assume that every 25–60 HP four-stroke engine uses the same pump. Compare the pump body, mounting points, connector, fuel-line arrangement, and applicable manufacturer reference before purchase.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eFuel pump assembly\u003c\/dd\u003e\n\u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eSelected Mercury and Mariner 25–60 HP 4-stroke outboards\u003c\/dd\u003e\n\u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect replacement\u003c\/dd\u003e\n\u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\/petrol marine fuel systems\u003c\/dd\u003e\n\u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eExisting electrical and fuel-system connections\u003c\/dd\u003e\n\u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eHigh-grade plastic\u003c\/dd\u003e\n\u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n\u003cdt\u003eDimensions\u003c\/dt\u003e\n\u003cdd\u003e120 × 100 × 85 mm (4.72 × 3.94 × 3.35 in)\u003c\/dd\u003e\n\u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e0.432 kg (0.95 lb)\u003c\/dd\u003e\n\u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eOEM-compatible connections\u003c\/dd\u003e\n\u003cdt\u003eProduct Classification\u003c\/dt\u003e\n\u003cdd\u003eAftermarket replacement; not an OEM component\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Fuel pump assembly\u003c\/li\u003e\n\u003cli\u003e1 × Cable tie\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMounting hardware, seals, hoses, wiring, and other parts are not included unless specifically shown or stated in the order details.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect the negative battery terminal and work in a well-ventilated area away from ignition sources.\u003c\/li\u003e\n\u003cli\u003eRelieve fuel-system pressure according to the service procedure for your exact engine.\u003c\/li\u003e\n\u003cli\u003ePlace absorbent rags below the pump to collect residual fuel.\u003c\/li\u003e\n\u003cli\u003eLabel and carefully disconnect the fuel lines and electrical connector from the original pump.\u003c\/li\u003e\n\u003cli\u003eRemove the original mounting hardware and take out the old assembly.\u003c\/li\u003e\n\u003cli\u003eClean the mounting surface and compare the replacement pump with the original before fitting.\u003c\/li\u003e\n\u003cli\u003eInstall the replacement pump using the original hardware unless the engine service manual specifies otherwise.\u003c\/li\u003e\n\u003cli\u003eReconnect the fuel lines and electrical connector, checking that every connection is secure and correctly routed.\u003c\/li\u003e\n\u003cli\u003eReconnect the negative battery terminal.\u003c\/li\u003e\n\u003cli\u003ePrime the fuel system according to the engine manufacturer's procedure.\u003c\/li\u003e\n\u003cli\u003eStart the engine and inspect the pump, fuel lines, and connections for leaks before operating the boat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow can I confirm this pump fits my engine?\u003c\/summary\u003e\u003cp\u003eCheck the engine brand, model designation, horsepower, four-stroke configuration, production year, and serial-number range. Compare the original pump's shape, mounting points, connector, fuel-line arrangement, and manufacturer reference with the information above. If any of these details differ, confirm fitment with the engine service manual before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are common symptoms of a failing fuel pump?\u003c\/summary\u003e\u003cp\u003ePossible symptoms include hard starting, engine stalling, sputtering or hesitation under load, loss of power, or an abnormal pump noise. These symptoms can also be caused by restricted fuel lines, contaminated fuel, wiring faults, filters, injectors, or other fuel-system problems, so diagnose the system before replacing the pump.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this pump compatible with E10 fuel?\u003c\/summary\u003e\u003cp\u003eThe listing is intended for gasoline\/petrol marine fuel systems. Fuel compatibility depends on the complete fuel system and the requirements of the specific engine. Follow the engine manufacturer's fuel guidance and avoid contaminated or stale fuel.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs calibration required after installation?\u003c\/summary\u003e\u003cp\u003eA replacement fuel pump normally does not require electronic programming. Correct installation, fuel-system priming, leak inspection, and verification of the engine's normal fuel pressure are still required. Follow the service manual for your exact engine.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat can cause a marine fuel pump to fail?\u003c\/summary\u003e\u003cp\u003eCommon causes include water or debris in the fuel, stale or contaminated fuel, restricted filters or lines, corrosion, overheating, and electrical or wiring problems. Correct the underlying cause before installing a replacement pump.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM pump?\u003c\/summary\u003e\u003cp\u003eNo. This listing is for an aftermarket replacement component. The OEM and aftermarket numbers shown above are provided as reference information and do not by themselves replace exact engine fitment verification.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the shipping and warranty terms?\u003c\/summary\u003e\u003cp\u003eShipping availability, delivery estimates, returns, and any applicable warranty are determined by the seller's current order and policy terms. Review the applicable policy information at checkout or contact support before ordering if you need confirmation.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFuel is flammable. Disconnect the battery, relieve fuel pressure, provide ventilation, and keep all ignition sources away during installation.\u003c\/li\u003e\n\u003cli\u003eVerify the original part, engine model, year, configuration, and serial number before purchase.\u003c\/li\u003e\n\u003cli\u003eDo not operate the engine if any fuel leak is present.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended when the required fuel-system service procedure is unfamiliar.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — Marine replacement parts selected for dependable service in real-world conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobal Fulfillment\u003c\/strong\u003e — Shipping options and delivery estimates are shown according to the destination and current checkout availability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Practical replacement solutions supported by product and order assistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723800744251,"sku":"QM-FP21005","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/QM-FP21005.png?v=1763032157"},{"product_id":"fuel-pump-assembly-fits-mercury-mariner-25-60-hp-4-stroke-replaces-8m0141844-8m0118176-881862t1","title":"Fuel Pump Assembly for Mercury\/Mariner 25–60 HP 4-Stroke EFI Outboards — Replaces 8M0141844, 8M0118176 and 881862T1","description":"\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis aftermarket \u003cstrong\u003efuel pump assembly\u003c\/strong\u003e is intended as a replacement for selected Mercury and Mariner 4-stroke EFI outboard applications. The referenced applications cover Mercury 25–60 HP engines, including 3-cylinder 30\/40 HP EFI configurations and 4-cylinder 40\/50\/60 HP EFI configurations. Exact fitment depends on the engine configuration and serial-number range.\u003c\/p\u003e\n  \u003cp\u003eUse the original pump number, engine model, cylinder configuration and serial number to confirm compatibility before ordering. The assembly replaces the listed Mercury reference numbers where the application catalog identifies the same pump.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplacement fuel pump assembly for selected 4-stroke EFI outboards.\u003c\/li\u003e\n    \u003cli\u003eDesigned for direct replacement when the original part number and application conditions match.\u003c\/li\u003e\n    \u003cli\u003eSold as one fuel pump assembly; mounting hardware and other engine-specific components are not included unless separately stated.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eVerified Reference Numbers\u003c\/h2\u003e\n  \u003cp\u003eThe following manufacturer reference numbers are associated with this pump application in the available catalog material. Reference numbers alone do not replace model and serial-number verification.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Fuel Pump Reference Numbers\"\u003e\n      \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003cth\u003eReference Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0141844\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0118176\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e881862T1\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e881862T07\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e892874T\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e899106T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eEngine Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThe application references available for this fuel pump include the following Mercury 4-stroke EFI configurations. Because Mercury fitment changes by serial-number range and production configuration, treat this table as an application guide rather than a universal fitment statement.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Mercury Engine Compatibility\"\u003e\n      \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eFitment Conditions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e3-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e30–40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eConfirm the engine serial-number range and original pump number.\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e40–60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eConfirm the engine serial-number range and original pump number.\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e25 HP application\u003c\/td\u003e\n\u003ctd\u003e25 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCatalog occurrences exist for specific serial ranges; verify the exact serial number before purchase.\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003eEquivalent 4-stroke EFI platforms\u003c\/td\u003e\n\u003ctd\u003e25–60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eOnly applicable where the original pump reference and engine serial-number conditions match.\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n  \u003cp\u003eDo not rely on horsepower alone. Compare the pump's connections, mounting arrangement, original reference number and complete engine serial number with the service information for your outboard.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n    \u003cdd\u003eFuel pump assembly\u003c\/dd\u003e\n    \u003cdt\u003eApplication\u003c\/dt\u003e\n    \u003cdd\u003eSelected Mercury and Mariner 4-stroke EFI outboards\u003c\/dd\u003e\n    \u003cdt\u003eRated Engine Range\u003c\/dt\u003e\n    \u003cdd\u003e25–60 HP applications, subject to model and serial-number conditions\u003c\/dd\u003e\n    \u003cdt\u003eReplacement Type\u003c\/dt\u003e\n    \u003cdd\u003eAftermarket replacement\u003c\/dd\u003e\n    \u003cdt\u003ePackage Quantity\u003c\/dt\u003e\n    \u003cdd\u003e1 fuel pump assembly\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 × Fuel pump assembly\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eReuse only the original hardware and ancillary components that are in serviceable condition and specified for your engine. Any gaskets, fasteners, hoses, clamps or wiring components not shown above are not confirmed as included.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eDisconnect the battery and relieve fuel-system pressure according to the engine service manual.\u003c\/li\u003e\n    \u003cli\u003eBefore removal, identify the fuel-line routing and electrical connections.\u003c\/li\u003e\n    \u003cli\u003eDisconnect the fuel lines and electrical connector, taking appropriate precautions to prevent fuel spills.\u003c\/li\u003e\n    \u003cli\u003eRemove the original pump and compare the replacement's mounting points, connections and reference number.\u003c\/li\u003e\n    \u003cli\u003eInstall the replacement using the correct engine-specific hardware and any required serviceable seals.\u003c\/li\u003e\n    \u003cli\u003eReconnect the fuel lines and electrical connector securely and confirm correct routing.\u003c\/li\u003e\n    \u003cli\u003ePrime the fuel system according to the manufacturer's procedure.\u003c\/li\u003e\n    \u003cli\u003eInspect all connections for leaks before operating the engine and recheck them after the engine reaches operating temperature.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003eFuel-system work should be performed by a qualified technician or by a person familiar with marine fuel-system safety procedures.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I confirm that this pump fits my engine?\u003c\/summary\u003e\n    \u003cp\u003eMatch the original pump reference number, engine brand, model, horsepower, stroke, cylinder configuration and complete serial number. The 25–60 HP range by itself is not sufficient to confirm fitment.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich reference numbers are associated with this replacement?\u003c\/summary\u003e\n    \u003cp\u003eThe available application information associates this replacement with 8M0141844, 8M0118176, 881862T1, 881862T07, 892874T and 899106T. Verify the number on your original pump and the engine serial-number range before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\n    \u003cp\u003eNo. This listing is for an aftermarket replacement assembly. Mercury reference numbers are shown only for application and cross-reference purposes.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the package include mounting hardware or a cable tie?\u003c\/summary\u003e\n    \u003cp\u003eThe confirmed package content is one fuel pump assembly. Mounting hardware, cable ties, seals and other installation items are not confirmed as included unless specifically shown in the package contents.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I install it myself?\u003c\/summary\u003e\n    \u003cp\u003eInstallation involves fuel, electrical connections and possible fuel pressure. Follow the engine service manual and applicable marine safety procedures, or use a qualified marine technician.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are common symptoms of a failing fuel pump?\u003c\/summary\u003e\n    \u003cp\u003ePossible symptoms include hard starting, stalling, hesitation, loss of power under load and inadequate fuel pressure. These symptoms can also result from restricted filters, damaged wiring, injector problems or other fuel-system faults, so diagnosis should be completed before replacement.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs programming required after installation?\u003c\/summary\u003e\n    \u003cp\u003eA fuel pump replacement normally does not require electronic programming, but the installation and fuel-system priming procedure specified for the particular engine must be followed.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify the complete engine serial number and original pump reference before purchase.\u003c\/li\u003e\n    \u003cli\u003eDo not install the part if the connections, mounting arrangement or original reference do not match.\u003c\/li\u003e\n    \u003cli\u003eRelieve fuel pressure, avoid ignition sources and work in a properly ventilated area.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement and is not manufactured by Mercury or Mariner.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eMarine replacement parts selected for practical repair and maintenance applications.\u003c\/li\u003e\n    \u003cli\u003eClear reference-number and fitment guidance to help customers compare replacement parts.\u003c\/li\u003e\n    \u003cli\u003eSupport for customers who need help matching a part to a marine engine application.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723800777019,"sku":"IG-K18D-EWAD","price":43.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/IG-K18D-EWAD.png?v=1763032159"},{"product_id":"fuel-pump-assembly-fits-mercury-mariner-25-60-hp-4-stroke-replaces-881862t1-892874t01-899106t01","title":"Fuel Pump Assembly for Selected Mercury\/Mariner 25–60 HP 4-Stroke EFI Outboards — Replaces 881862T1, 892874T01 and 899106T01","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis aftermarket \u003cstrong\u003efuel pump assembly\u003c\/strong\u003e is intended for selected Mercury and Mariner 4-stroke EFI outboard applications in the 25–60 HP range. Catalog references identify applications including 30 and 40 HP 3-cylinder EFI models and 40, 50 and 60 HP 4-cylinder EFI models. Fitment depends on the exact engine model, serial-number range and original pump configuration.\u003c\/p\u003e\n\u003cp\u003eUse the reference numbers and compatibility information below as a starting point, then compare the original pump, connector and mounting arrangement before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement fuel-pump assembly for selected Mercury and Mariner 4-stroke EFI outboards.\u003c\/li\u003e\n  \u003cli\u003eDesigned for a replacement installation when the pump configuration and connections match the original component.\u003c\/li\u003e\n  \u003cli\u003eAftermarket replacement; Mercury and Mariner names and part numbers are used only to identify application and cross-reference references.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eThe following references are associated with this fuel-pump application in the available aftermarket catalog material. Part-number references do not replace model and serial-number verification.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand or Source\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e881862T1\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e881862T07\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e892874T\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e892874T01\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e899106T\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e899106T01\u003c\/td\u003e\n\u003ctd\u003eOEM reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0118176\u003c\/td\u003e\n\u003ctd\u003eCatalog reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e8M0141844\u003c\/td\u003e\n\u003ctd\u003eCatalog reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-8866\u003c\/td\u003e\n\u003ctd\u003eAftermarket cross-reference\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eAvailable catalog information supports the application groups below. The ranges are not a substitute for checking the complete engine model and serial number, because similar horsepower and cylinder-count configurations can use different components.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eEngine Configuration\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eApplication Note\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e3-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCatalog-listed application group\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e3-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCatalog-listed application group\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCatalog-listed application group\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCatalog-listed application group\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eCatalog-listed application group\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003e3-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial number\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003e3-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial number\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial number\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial number\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003eVerify the exact model and serial number\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eFuel pump assembly\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eSelected Mercury and Mariner 4-stroke EFI outboard engines\u003c\/dd\u003e\n  \u003cdt\u003eHorsepower Range\u003c\/dt\u003e\n\u003cdd\u003e25–60 HP application range; confirm the specific engine configuration\u003c\/dd\u003e\n  \u003cdt\u003eStroke\u003c\/dt\u003e\n\u003cdd\u003e4-Stroke\u003c\/dd\u003e\n  \u003cdt\u003eFuel System\u003c\/dt\u003e\n\u003cdd\u003eEFI outboard fuel system\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eReplacement component; compare the original pump, fittings, connector and mounting points before installation\u003c\/dd\u003e\n  \u003cdt\u003ePart Type\u003c\/dt\u003e\n\u003cdd\u003eSingle fuel pump assembly, not a multi-part service kit\u003c\/dd\u003e\n  \u003cdt\u003eManufacturer Status\u003c\/dt\u003e\n\u003cdd\u003eAftermarket replacement, not a genuine Mercury OEM component\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × aftermarket fuel pump assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdditional fittings, seals, wiring components or mounting hardware are not confirmed as included unless specifically shown in the product package or order details. Reuse original hardware only when it is serviceable and appropriate for the installation.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eConfirm the engine brand, complete model designation, horsepower, stroke, cylinder count and serial-number range before beginning work.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery and follow the engine service manual's fuel-system safety procedures.\u003c\/li\u003e\n  \u003cli\u003eRelieve fuel-system pressure before disconnecting fuel lines to reduce the risk of fuel spray.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement pump with the original for connector style, hose connections, mounting points and physical orientation.\u003c\/li\u003e\n  \u003cli\u003eRemove the original pump and install the replacement using appropriate serviceable hardware and the service manual's procedures.\u003c\/li\u003e\n  \u003cli\u003eReconnect the fuel lines and electrical connector securely. Replace damaged clamps, hoses or seals as required by the service manual.\u003c\/li\u003e\n  \u003cli\u003eReconnect the battery, prime the fuel system according to the manufacturer's procedure and inspect all connections for leaks.\u003c\/li\u003e\n  \u003cli\u003eDo not operate the engine if fuel leakage, an incorrect connection or an abnormal pump condition is found.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I confirm whether this pump fits my outboard?\u003c\/summary\u003e\n  \u003cp\u003eMatch the original pump's OEM reference, engine brand, complete model designation, horsepower, stroke, cylinder count and serial-number range. Also compare the connector, hose arrangement and mounting points. Horsepower alone is not sufficient to confirm fitment.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs this a genuine Mercury OEM part?\u003c\/summary\u003e\n  \u003cp\u003eNo. This listing is for an aftermarket replacement. Mercury and Mariner references are provided only for application identification and cross-reference purposes.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes the package include a cable tie, fittings or installation hardware?\u003c\/summary\u003e\n  \u003cp\u003eThe confirmed package item is one fuel pump assembly. Extra fittings, cable ties, seals and hardware should not be assumed to be included unless they are expressly listed with the order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eCan I install the pump without checking the fuel system?\u003c\/summary\u003e\n  \u003cp\u003eNo. Fuel-system work requires pressure relief, electrical isolation and leak inspection. Follow the applicable factory service manual, and use qualified marine service assistance if you are not familiar with fuel-system repairs.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat should I do if the engine still has a fuel problem after replacement?\u003c\/summary\u003e\n  \u003cp\u003eCheck fuel pressure, fuel delivery, wiring, filters, hoses, tank ventilation and related EFI components according to the service manual. A no-start or power-loss condition is not always caused by the fuel pump.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow can I verify an unlisted part number?\u003c\/summary\u003e\n  \u003cp\u003eContact support with a clear photo of the original pump and the complete engine model and serial information. Do not rely on a similar-looking pump or a partial part number alone.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify fitment against the complete engine model and serial number before purchase.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement pump with the original component before installation.\u003c\/li\u003e\n  \u003cli\u003eWork in a well-ventilated area away from ignition sources and properly contain spilled fuel.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not a genuine Mercury OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended for fuel-system work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine Replacement Parts\u003c\/strong\u003e — We provide aftermarket components for marine repair and maintenance applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication-Focused Listings\u003c\/strong\u003e — Product references and compatibility information are provided to help you compare the replacement with your original part.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment First\u003c\/strong\u003e — Always verify the complete engine identification and component configuration before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723800809787,"sku":"75-4XNY-EETY","price":52.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/75-4XNY-EETY.png?v=1763032160"},{"product_id":"water-pump-repair-kit-fits-mercury-marine-30-60-hp-4-stroke-outboards-replaces-46-812966a12-812966a12","title":"Aftermarket Water Pump Service Kit for Mercury 40, 50 \u0026 60 HP EFI 4-Stroke Outboards – Replaces 46-812966A12","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003ewater pump service kit\u003c\/strong\u003e is an aftermarket replacement for selected Mercury and Mariner 40, 50, and 60 HP EFI 4-stroke outboards. It is intended to restore the water pump assembly during cooling-system service and replaces the Mercury OEM reference \u003cstrong\u003e46-812966A12\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe kit is designed for the specific 40–60 HP EFI 4-stroke application shown below. Confirm the OEM reference and your engine configuration before ordering; horsepower alone is not sufficient to establish fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAftermarket replacement water pump service kit.\u003c\/li\u003e\n  \u003cli\u003eSuitable for the listed Mercury and Mariner EFI 4-stroke applications.\u003c\/li\u003e\n  \u003cli\u003eIncludes the principal water pump service components listed below, including the impeller, housing, gaskets, wear plate, pump base, and related sealing hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse these references to compare the service-kit application with your original part.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eReference Type\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e46-812966A12\u003c\/td\u003e\n        \u003ctd\u003eOEM replacement reference\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe documented application is limited to the following horsepower and engine configuration. Model-year and serial-number coverage is not specified in the available reference material, so verify the OEM number on your existing service parts before installation.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eEngine Application\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eEFI\u003c\/th\u003e\n        \u003cth\u003eOEM Part No.\u003c\/th\u003e\n        \u003cth\u003eFitment Notes\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury \/ Mariner\u003c\/td\u003e\n        \u003ctd\u003eOutboard\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eYes\u003c\/td\u003e\n        \u003ctd\u003e46-812966A12\u003c\/td\u003e\n        \u003ctd\u003eUse only where the original water pump service-kit reference matches.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury \/ Mariner\u003c\/td\u003e\n        \u003ctd\u003eOutboard\u003c\/td\u003e\n        \u003ctd\u003e50\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eYes\u003c\/td\u003e\n        \u003ctd\u003e46-812966A12\u003c\/td\u003e\n        \u003ctd\u003eUse only where the original water pump service-kit reference matches.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury \/ Mariner\u003c\/td\u003e\n        \u003ctd\u003eOutboard\u003c\/td\u003e\n        \u003ctd\u003e60\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003eYes\u003c\/td\u003e\n        \u003ctd\u003e46-812966A12\u003c\/td\u003e\n        \u003ctd\u003eUse only where the original water pump service-kit reference matches.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n  \u003cdd\u003eWater pump service kit\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n  \u003cdd\u003eMercury and Mariner 40, 50, and 60 HP EFI 4-stroke outboards\u003c\/dd\u003e\n  \u003cdt\u003eReplacement Reference\u003c\/dt\u003e\n  \u003cdd\u003eMercury OEM 46-812966A12\u003c\/dd\u003e\n  \u003cdt\u003eConstruction\u003c\/dt\u003e\n  \u003cdd\u003eMarine-service replacement components, including rubber and metal pump components\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n  \u003cdd\u003eDirect replacement when the original application and part reference match\u003c\/dd\u003e\n  \u003cdt\u003eFitment Limitation\u003c\/dt\u003e\n  \u003cdd\u003eModel-year and serial-number coverage is not specified; verify the original part number before purchase\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Water pump impeller — 47-19453T\u003c\/li\u003e\n  \u003cli\u003e1 x Pump housing — 14334A3\u003c\/li\u003e\n  \u003cli\u003e1 x Wear plate — 19700A2\u003c\/li\u003e\n  \u003cli\u003e1 x Upper gasket — 27-822189\u003c\/li\u003e\n  \u003cli\u003e1 x Lower gasket — 27-19701\u003c\/li\u003e\n  \u003cli\u003e1 x Water pump base — 46-812966A7\u003c\/li\u003e\n  \u003cli\u003e1 x 4-stroke tube seal — 859770-1\u003c\/li\u003e\n  \u003cli\u003e2 x Plastic washer — 12-858234\u003c\/li\u003e\n  \u003cli\u003e1 x O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComponent quantities and part references are provided as an application guide. Compare the supplied parts with the components removed from your engine before installation.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery, turn the engine off, and allow it to cool completely.\u003c\/li\u003e\n  \u003cli\u003ePlace the outboard in a secure service position and follow the applicable manufacturer procedure for lower-unit removal.\u003c\/li\u003e\n  \u003cli\u003eRemove the old water pump housing, impeller, gaskets, wear plate, base, and sealing components.\u003c\/li\u003e\n  \u003cli\u003eClean all mating surfaces and inspect the driveshaft, water tube, keyway, and surrounding components for wear or damage.\u003c\/li\u003e\n  \u003cli\u003eInstall the replacement components in the correct order. Ensure the impeller key is correctly seated if the engine uses a keyed impeller shaft.\u003c\/li\u003e\n  \u003cli\u003eLubricate the impeller and housing with a suitable water-pump installation lubricant. Do not use petroleum grease unless specifically approved for the application.\u003c\/li\u003e\n  \u003cli\u003eRotate the driveshaft in the correct direction while fitting the housing over the impeller so the impeller vanes are set properly.\u003c\/li\u003e\n  \u003cli\u003eReinstall the lower unit, aligning the driveshaft, shift shaft, and water tube.\u003c\/li\u003e\n  \u003cli\u003eTighten all fasteners to the manufacturer’s specified torque.\u003c\/li\u003e\n  \u003cli\u003eRun the engine only in water or with an approved flushing device, then confirm a steady tell-tale stream and normal operating temperature.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I confirm that this kit fits my engine?\u003c\/summary\u003e\u003cp\u003eConfirm that your outboard is a Mercury or Mariner 40, 50, or 60 HP EFI 4-stroke model and compare the original water pump service-kit reference with \u003cstrong\u003e46-812966A12\u003c\/strong\u003e. Check the exact engine model and serial information in the manufacturer service documentation because horsepower alone does not confirm fitment.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the signs of a failing water pump?\u003c\/summary\u003e\u003cp\u003eCommon symptoms include a weak or missing tell-tale stream, overheating warnings, abnormal operating temperature, steam, or reduced cooling-water flow. Stop operating the engine if overheating is suspected.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the kit include the pump housing?\u003c\/summary\u003e\u003cp\u003eYes. The listed kit contents include a replacement water pump housing, impeller, wear plate, pump base, gaskets, tube seal, washers, and an O-ring.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM Mercury kit?\u003c\/summary\u003e\u003cp\u003eNo. This is an aftermarket replacement kit that references Mercury OEM part number 46-812966A12 for application identification. It is not represented as a genuine Mercury-branded product.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eShould the water pump impeller be replaced on a schedule?\u003c\/summary\u003e\u003cp\u003eFollow the maintenance interval in your engine manufacturer’s service manual. Inspection or replacement may be needed sooner when the outboard is used in sand, silt, salt water, or other conditions that can accelerate water-pump wear.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if the supplied components do not match my original parts?\u003c\/summary\u003e\u003cp\u003eDo not force installation. Stop and compare the OEM reference, engine model, and serial information. Contact the seller before installation if the component shape, dimensions, or part references differ.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the OEM reference, engine configuration, and component dimensions before purchase.\u003c\/li\u003e\n  \u003cli\u003eDo not operate the engine without an adequate water supply or an approved flushing device.\u003c\/li\u003e\n  \u003cli\u003eUse the manufacturer’s service manual for disassembly procedures, fastener torque, and final testing.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended if you are not experienced with outboard lower-unit service.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement, not a genuine OEM component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine-Focused Parts\u003c\/strong\u003e — Replacement components selected for common outboard maintenance and repair applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication-Based Listing\u003c\/strong\u003e — Product references and fitment information are provided to help match the original service part.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupport for Installation Decisions\u003c\/strong\u003e — Always compare the original component and manufacturer service information before fitting a replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723964256571,"sku":"19KM004-QM","price":155.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/19KM004-QM.png?v=1763038539"},{"product_id":"water-pump-impeller-kit-fits-mercury-mariner-30-75-hp-replaces-47-19453t-47-19453","title":"Water Pump Impeller Kit for Mercury\/Mariner 30–75 HP and Force 70–75 HP Outboards – Replaces 47-19453T and 47-19453","description":"\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis \u003cstrong\u003eWater Pump Impeller Kit\u003c\/strong\u003e is an aftermarket replacement designed for selected Mercury\/Mariner 30–75 HP and Force 70–75 HP outboard motors. The listed applications include both 2-stroke and 4-stroke models, standard gearcases, and selected BigFoot gearcases. Always verify the exact model, year, stroke, gearcase, and serial-number range before ordering.\u003c\/p\u003e\n  \u003cp\u003eThe kit is listed as a replacement for Mercury\/Mariner 47-19453T, 47-19453T1, 47-19453T2, and 47-19453T3; Quicksilver 19453Q2; Sierra 18-8900; Mallory 9-45301; GLM 12044; and SEI Marine 96-265-03AK.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eRubber impeller material intended for dependable water-pump service.\u003c\/li\u003e\n    \u003cli\u003eIncludes the impeller, key, plate, gaskets, washers, guide tube\/coupler, and O-ring listed below.\u003c\/li\u003e\n    \u003cli\u003eInstallation requires removal and disassembly of the water-pump housing and lower unit.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003csection\u003e\n  \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n  \u003cp\u003eUse these references as cross-reference information only. Confirm the complete engine application before installation.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n      \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e47-19453T1\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e47-19453T2\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e47-19453T3\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eQuicksilver\u003c\/td\u003e\n\u003ctd\u003e19453Q2\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-8900\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMallory\u003c\/td\u003e\n\u003ctd\u003e9-45301\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eGLM\u003c\/td\u003e\n\u003ctd\u003e12044\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eSEI Marine\u003c\/td\u003e\n\u003ctd\u003e96-265-03AK\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eEngine and Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThe applications below are the listed compatibility range. Model, year, stroke, gearcase, and serial-number conditions must be considered together; horsepower alone is not sufficient to confirm fitment.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Mercury and Mariner Engine Compatibility\"\u003e\n      \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\/Gearcase\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e30 HP Jet\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1994–1995\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eS\/N 0D000750 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e35 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eEFI models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1991–1997\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003e3-cylinder models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1999–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eEFI and carbureted models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e40 HP EFI Jet\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1999–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eSeaPro models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e45 HP\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1994–1995\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003e3-cylinder Jet; S\/N 0D000750 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1991–1997\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003e3-cylinder; USA S\/N 0D000750–0G589999; Belgian 9683055–99773099\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1999–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eIncluding EFI models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e55 HP\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–1997\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003e3-cylinder; USA S\/N 0D000750 and up; Belgian 9741042 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e55 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eIncluding EFI models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1991–1995\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003e3-cylinder standard models; USA S\/N 0D000750 and up; Belgian 9683055 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eIncluding EFI models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eBigFoot\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eVerify the specific gearcase\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e70 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eIncluding selected BigFoot models\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e75 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998–2021\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eIncluding selected BigFoot models\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Force Engine Compatibility\"\u003e\n      \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\/Gearcase\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eForce\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e70 HP\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1995–1999\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eVerify the specific model\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eForce\u003c\/td\u003e\n\u003ctd\u003eStandard Gearcase\u003c\/td\u003e\n\u003ctd\u003e75 HP\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1995–1999\u003c\/td\u003e\n\u003ctd\u003e47-19453T\u003c\/td\u003e\n\u003ctd\u003eVerify the specific model\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eOutboard water pump impeller kit\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect replacement; requires water-pump housing disassembly\u003c\/dd\u003e\n    \u003cdt\u003eImpeller Construction\u003c\/dt\u003e\n\u003cdd\u003eRubber impeller with metal insert\u003c\/dd\u003e\n    \u003cdt\u003eImpeller Color\u003c\/dt\u003e\n\u003cdd\u003eBlack\u003c\/dd\u003e\n    \u003cdt\u003eMaterial Information\u003c\/dt\u003e\n\u003cdd\u003eRubber compound intended for marine water-pump service\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 × Water pump impeller — replaces 47-19453T\u003c\/li\u003e\n    \u003cli\u003e1 × Impeller key\u003c\/li\u003e\n    \u003cli\u003e1 × Plate — replaces 19700A2\u003c\/li\u003e\n    \u003cli\u003e1 × Guide tube\/coupler — replaces 859770, 8597701, and 893857\u003c\/li\u003e\n    \u003cli\u003e2 × Washers — replace 12-858234\u003c\/li\u003e\n    \u003cli\u003e1 × Upper gasket — replaces 27-822189\u003c\/li\u003e\n    \u003cli\u003e1 × Lower gasket — replaces 27-19701\u003c\/li\u003e\n    \u003cli\u003e1 × O-ring\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eDisconnect the battery and place the outboard in neutral.\u003c\/li\u003e\n    \u003cli\u003ePlace a drain pan under the gearcase and remove the drain and vent screws to drain the gear oil.\u003c\/li\u003e\n    \u003cli\u003eRemove the fasteners securing the lower unit to the driveshaft housing.\u003c\/li\u003e\n    \u003cli\u003eLower the gearcase carefully to expose the water-pump assembly.\u003c\/li\u003e\n    \u003cli\u003eRemove the fasteners securing the water-pump housing cover and lift off the cover.\u003c\/li\u003e\n    \u003cli\u003eRemove the old impeller from the driveshaft and note the position of the impeller key.\u003c\/li\u003e\n    \u003cli\u003eClean the housing and plate. Install the applicable gaskets, plate, impeller, and key from the kit.\u003c\/li\u003e\n    \u003cli\u003eReassemble the housing with the impeller vanes oriented correctly for the engine's rotation.\u003c\/li\u003e\n    \u003cli\u003eReinstall the lower unit, refill the gearcase with the correct gear oil, and reconnect the battery.\u003c\/li\u003e\n    \u003cli\u003eRun the engine only with an appropriate water supply and verify a strong, consistent tell-tale stream.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting and FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\u003csummary\u003eHow do I confirm fitment?\u003c\/summary\u003e\u003cp\u003eCompare the engine brand, model, horsepower, year, stroke, gearcase, and serial number with the compatibility information above. If any condition differs, consult the engine parts manual or confirm with a qualified marine technician.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eWhat are common signs of a failing impeller?\u003c\/summary\u003e\u003cp\u003eSymptoms may include overheating at idle or low speed, a weak or intermittent tell-tale stream, or an engine warning alarm. Stop operation and inspect the cooling system if these symptoms occur.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eHow often should the impeller be replaced?\u003c\/summary\u003e\u003cp\u003eReplacement intervals depend on the engine manufacturer's maintenance schedule and operating conditions. Sandy, silty, or saltwater use can accelerate wear, so inspect the impeller regularly.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eDoes this kit fit both 2-stroke and 4-stroke engines?\u003c\/summary\u003e\u003cp\u003eThe listed applications include selected 2-stroke and 4-stroke Mercury, Mariner, and Force outboards. Confirm the complete engine and serial-number application before ordering.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eWill I use every gasket and seal in the kit?\u003c\/summary\u003e\u003cp\u003eThe kit covers multiple applications, so some components may remain unused. Use only the parts that correspond to the water-pump assembly on your specific engine.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\u003cp\u003eNo. This is an aftermarket replacement kit listed for the reference numbers shown above. It is not manufactured or sold as a genuine OEM component.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eWhat are the shipping speed and cost?\u003c\/summary\u003e\u003cp\u003eTypical transit time is 5–15 days. Standard shipping is free; expedited options, when available, are shown at checkout based on the delivery location.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eWhat is the warranty and return policy?\u003c\/summary\u003e\u003cp\u003eThis product is covered by a 1-year warranty against manufacturing defects under normal use. Returns are accepted within the standard return window for unused items in their original condition. Contact support for current instructions and eligibility.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eSafety and Important Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify the engine model, year, stroke, gearcase, serial number, and original part before ordering.\u003c\/li\u003e\n    \u003cli\u003eDo not operate the outboard without an adequate water supply.\u003c\/li\u003e\n    \u003cli\u003eFollow the engine manufacturer's service procedures and use suitable protective equipment.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended when lower-unit removal or water-pump service is unfamiliar.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not a genuine OEM component.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine replacement parts intended for demanding real-world conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery is available to most regions, with typical transit times of 5–15 days.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Competitive pricing with attention to materials and quality control.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723964289339,"sku":"SJ-95IV-0PFI","price":18.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/SJ-95IV-0PFI.png?v=1763038540"},{"product_id":"water-pump-repair-kit-fits-mercury-mariner-30-60-hp-4-stroke-outboards-replaces-46-812966a12","title":"Water Pump Repair Kit for Mercury\/Mariner 30–60 HP 4-Stroke Outboards — Replaces 46-812966A12","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis aftermarket \u003cstrong\u003ewater pump repair kit\u003c\/strong\u003e is intended for servicing the cooling-system water pump on selected Mercury and Mariner 30–60 HP 4-stroke outboards. The supplied compatibility information includes EFI, JET, SeaPro, BIGFOOT and Formula variants, along with selected Force 70 HP and 75 HP applications. Confirm the exact engine model, year, serial-number range, gearcase configuration and original pump components before ordering.\u003c\/p\u003e\n\u003cp\u003eThe kit is listed as a replacement for Mercury\/Mariner references \u003cstrong\u003e46-812966A12\u003c\/strong\u003e, \u003cstrong\u003e812966A11\u003c\/strong\u003e, \u003cstrong\u003e812966A4\u003c\/strong\u003e, \u003cstrong\u003e812966A5\u003c\/strong\u003e, \u003cstrong\u003e14334A1\u003c\/strong\u003e, \u003cstrong\u003e14334A2\u003c\/strong\u003e and \u003cstrong\u003e14334A3\u003c\/strong\u003e. Additional aftermarket reference information includes Sierra \u003cstrong\u003e18-3324\u003c\/strong\u003e and Quicksilver \u003cstrong\u003e812966A12\u003c\/strong\u003e. These numbers should be compared with the part removed from your engine; number co-occurrence alone does not confirm fitment for every model or serial range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAftermarket replacement water-pump repair kit for selected outboard applications.\u003c\/li\u003e\n  \u003cli\u003eIncludes the impeller, pump housing, plates, base, gaskets and related installation hardware listed below.\u003c\/li\u003e\n  \u003cli\u003eIntended for specific applications using a 1.83:1 ratio gearcase.\u003c\/li\u003e\n  \u003cli\u003eVerify the original parts and exact engine configuration before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number References\u003c\/h2\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Cross-Reference Matrix\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eReference Description\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003ePrimary replacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e812966A11\u003c\/td\u003e\n\u003ctd\u003eListed superseded reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e812966A4\u003c\/td\u003e\n\u003ctd\u003eListed superseded reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e812966A5\u003c\/td\u003e\n\u003ctd\u003eListed superseded reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e14334A1\u003c\/td\u003e\n\u003ctd\u003eListed replacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e14334A2\u003c\/td\u003e\n\u003ctd\u003eListed replacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\/Mariner\u003c\/td\u003e\n\u003ctd\u003e14334A3\u003c\/td\u003e\n\u003ctd\u003eHousing reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eQuicksilver\u003c\/td\u003e\n\u003ctd\u003e812966A12\u003c\/td\u003e\n\u003ctd\u003eListed equivalent reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-3324\u003c\/td\u003e\n\u003ctd\u003eListed aftermarket reference\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine and Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe following applications are listed for this repair kit. Always verify the complete model designation, production year, serial-number range, stroke configuration and gearcase ratio against your engine before purchase.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eListed Years\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e30 EFI\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2006–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e35 EFI JET\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2006–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eStandard and EFI versions listed\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2006–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 CARB\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2006–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 JET\u003c\/td\u003e\n\u003ctd\u003e40–60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1999–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eJet-drive variants listed\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 SeaPro\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2006–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eCommercial model listed\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e45 JET\u003c\/td\u003e\n\u003ctd\u003e45–60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998–2004\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2001–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eStandard and EFI versions listed\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e55, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1999–2006\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60, 3- and 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1999–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eStandard, EFI and BIGFOOT versions listed\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60 SeaPro\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2006–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eCommercial model listed\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eFormula 60\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2006–2012+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eForce\u003c\/td\u003e\n\u003ctd\u003e70 HP\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1991–1995\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eListed application; verify engine identification carefully\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eForce\u003c\/td\u003e\n\u003ctd\u003e75 HP\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1996–1998\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003eListed application; verify engine identification carefully\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eAftermarket water pump repair kit\u003c\/dd\u003e\n  \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eReplacement water-pump assembly components\u003c\/dd\u003e\n  \u003cdt\u003eApproximate Weight\u003c\/dt\u003e\n\u003cdd\u003e0.63 kg (1.39 lb)\u003c\/dd\u003e\n  \u003cdt\u003eGearcase Application\u003c\/dt\u003e\n\u003cdd\u003eSelected 1.83:1 ratio gearcases\u003c\/dd\u003e\n  \u003cdt\u003eManufacturer Status\u003c\/dt\u003e\n\u003cdd\u003eAftermarket replacement; not a Mercury, Mariner, Quicksilver or Sierra original-manufacturer product\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Impeller, reference 47-19453T\u003c\/li\u003e\n  \u003cli\u003e1 × Faceplate, reference 19700A2\u003c\/li\u003e\n  \u003cli\u003e1 × Base, reference 46-812966A7\u003c\/li\u003e\n  \u003cli\u003e1 × Housing, reference 14334A3\u003c\/li\u003e\n  \u003cli\u003e1 × Guide tube\/coupler, references 859770, 8597701 or 893857\u003c\/li\u003e\n  \u003cli\u003e1 × Upper gasket, reference 27-822189\u003c\/li\u003e\n  \u003cli\u003e1 × Lower gasket, reference 27-19701\u003c\/li\u003e\n  \u003cli\u003e1 × Impeller key\u003c\/li\u003e\n  \u003cli\u003e1 × O-ring\u003c\/li\u003e\n  \u003cli\u003e11 × Small washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComponent references identify the listed kit contents and may cover more than one engine variation. Compare the removed parts and the applicable exploded parts diagram before installation.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect the battery and place the outboard in neutral.\u003c\/li\u003e\n  \u003cli\u003eRemove the lower unit according to the engine manufacturer’s service procedure.\u003c\/li\u003e\n  \u003cli\u003ePlace the lower unit on a stable work surface and remove the water-pump housing fasteners.\u003c\/li\u003e\n  \u003cli\u003eLift off the old housing and note the order and orientation of all pump components.\u003c\/li\u003e\n  \u003cli\u003eRemove the old impeller, gaskets, faceplate and related seals. Clean the mating surfaces thoroughly.\u003c\/li\u003e\n  \u003cli\u003eInstall the applicable lower gasket, faceplate and impeller key.\u003c\/li\u003e\n  \u003cli\u003eInstall the impeller on the driveshaft, orienting the vanes in the correct direction for shaft rotation. Do not force the impeller over the key.\u003c\/li\u003e\n  \u003cli\u003eInstall the upper gasket and housing over the impeller.\u003c\/li\u003e\n  \u003cli\u003eTighten the housing fasteners using the manufacturer’s specified torque.\u003c\/li\u003e\n  \u003cli\u003eReinstall the lower unit, making sure the water tube and shift shaft are correctly aligned.\u003c\/li\u003e\n  \u003cli\u003eTorque the lower-unit mounting fasteners according to the applicable service manual.\u003c\/li\u003e\n  \u003cli\u003eTest the engine in an appropriate water supply and confirm a steady tell-tale stream before normal operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eUse the correct service manual for your exact engine. If you are not familiar with lower-unit removal or water-pump service, professional installation is recommended.\u003c\/p\u003e\n\n\u003ch2\u003eTroubleshooting and FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are common signs of a failing water pump?\u003c\/summary\u003e\u003cp\u003eCommon symptoms include a weak or missing tell-tale stream, an overheating alarm, steam from the exhaust or an engine that runs hotter than normal. Stop operation if overheating occurs and diagnose the cooling system before continuing.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow often should the impeller be inspected?\u003c\/summary\u003e\u003cp\u003eInspect the impeller at the interval specified by the engine manufacturer and whenever the engine shows cooling-system symptoms. Replacement frequency depends on operating hours, storage conditions and exposure to sand, silt or saltwater.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill this kit fit a BIGFOOT or SeaPro model?\u003c\/summary\u003e\u003cp\u003eThe supplied application information lists selected Mercury 60 HP BIGFOOT and Mercury 40\/60 HP SeaPro models. Confirm the exact model, year, serial-number range, gearcase ratio and original part numbers before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat should I do if the engine still overheats after installation?\u003c\/summary\u003e\u003cp\u003eStop the engine and check the impeller-key installation, impeller orientation, gasket placement, housing condition, water-tube alignment and cooling passages. Also verify that the replacement components match the exact water-pump assembly for your engine.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy might some washers or seals remain after installation?\u003c\/summary\u003e\u003cp\u003eThe listed kit covers multiple engine variations. Some components may not be used on every application. Use the parts diagram for your exact engine rather than installing unused parts by guesswork.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM product?\u003c\/summary\u003e\u003cp\u003eNo. This is an aftermarket replacement kit. The displayed Mercury, Mariner, Quicksilver and Sierra numbers are reference numbers used for application comparison and are not a statement that this kit is manufactured by those brands.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the warranty and return terms?\u003c\/summary\u003e\u003cp\u003eWarranty and return eligibility are governed by the seller’s current store policy and the order terms applicable at checkout. Contact support before returning or installing a part if the supplied components do not match your application.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety and Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm the exact engine brand, model, year, serial-number range, stroke type, gearcase ratio and original part numbers before ordering.\u003c\/li\u003e\n  \u003cli\u003eCompare the kit components with the original water-pump assembly and the applicable service-manual diagram.\u003c\/li\u003e\n  \u003cli\u003eNever operate an outboard with an uncertain cooling-water supply or an overheating warning.\u003c\/li\u003e\n  \u003cli\u003eThis is an aftermarket replacement product, not an OEM component.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended when lower-unit service experience or the correct torque specifications are unavailable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine Parts Focus\u003c\/strong\u003e — We provide replacement marine components for maintenance and repair applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication Guidance\u003c\/strong\u003e — Product references and compatibility information are supplied to help customers compare parts before ordering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupport\u003c\/strong\u003e — Contact support with your engine model, year, serial number and original part information when application confirmation is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723964420411,"sku":"JK-8YUE-71H8","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/JK-8YUE-71H8.png?v=1763038545"},{"product_id":"water-pump-impeller-kit-fits-mercury-marine-30-70-hp-outboards-replaces-46-60366a1-46-32767a1","title":"Water Pump Impeller Kit – Fits Mercury Marine 30–70 HP Outboards (Replaces 46-60366A1, 46-32767A1)","description":"\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eWater Pump Impeller Kit for Mercury Marine 30–70 HP Outboards\u003c\/strong\u003e is a comprehensive service kit for maintaining the engine cooling system. It is intended for selected Mercury Marine outboard applications across multiple model years. Because Mercury fitment depends on engine design and serial number, always compare your engine’s exact serial range with the compatibility information below before ordering.\u003c\/p\u003e\n\u003cp\u003eThe kit is listed as an aftermarket replacement for Mercury part numbers \u003cstrong\u003e46-60366A1\u003c\/strong\u003e, \u003cstrong\u003e46-32767A1\u003c\/strong\u003e, \u003cstrong\u003e46-60366Q1\u003c\/strong\u003e, and \u003cstrong\u003e46-60366T1\u003c\/strong\u003e, with additional aftermarket reference numbers from Sierra, GLM, Mallory, and Heurofosh shown in the matrix below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eServices the water pump assembly in the lower-unit area of the outboard.\u003c\/li\u003e\n\u003cli\u003eUses a durable neoprene marine-rubber impeller for dependable cooling-water flow.\u003c\/li\u003e\n\u003cli\u003eIncludes a nylon PA66 plastic upper water-pump housing.\u003c\/li\u003e\n\u003cli\u003eDesigned for selected Mercury 30–70 HP applications; serial-number verification is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse these references to compare the listed OEM and aftermarket numbers. A reference number alone does not replace confirmation of the complete engine model, stroke, year, and serial-number conditions.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-32767A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-60366Q1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-60366T1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-3507\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGLM\u003c\/td\u003e\n\u003ctd\u003e12010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMallory\u003c\/td\u003e\n\u003ctd\u003e9-48301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeurofosh\u003c\/td\u003e\n\u003ctd\u003e60366A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe following applications are listed for this replacement kit. Model descriptions, horsepower, cylinder configuration, and serial ranges must be considered together. Blank year or stroke fields indicate that the available application information is expressed by serial range rather than by a complete year or stroke designation.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eOEM Part No.\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 1271884–1448139\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard Jet\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: C159200–G589999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e1963–1965\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 1571114–1960826\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e1966–1969\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 1960827–2453068\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 6445653 and later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e1984–1989\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eApplication information attributed to SOXA Marine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e2-cylinder\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 4860103–6445653\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-cylinder\u003c\/td\u003e\n\u003ctd\u003e1960–1983\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 2874704–4362214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-cylinder\u003c\/td\u003e\n\u003ctd\u003e1989 and later\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 0C159200 and later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e4-cylinder\u003c\/td\u003e\n\u003ctd\u003e1986\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 5531630 and later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-cylinder\u003c\/td\u003e\n\u003ctd\u003e1968–1987\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eApplication information attributed to SOXA Marine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-cylinder\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 4962056 and later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 6428681–0D000749\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e1984–1987\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 6428681–0D000749\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 4382057–4571651\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e1977–1979\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eMade in USA; serial: 4571652–4977156.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e1977–1979\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eMade in Australia; serial: 8042350–8050199.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e1977–1979\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eMade in Belgium; serial: 9135825–9196960.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e3-cylinder\u003c\/td\u003e\n\u003ctd\u003e1977–1979\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eMade in Canada; serial: 7087823–7110997.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e46-60366A1\u003c\/td\u003e\n\u003ctd\u003eSerial: 4977157–0B110053\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eWater pump impeller kit\u003c\/dd\u003e\n\u003cdt\u003eInstallation Area\u003c\/dt\u003e\n\u003cdd\u003eLower-unit water-pump assembly\u003c\/dd\u003e\n\u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline outboard applications\u003c\/dd\u003e\n\u003cdt\u003eHousing Material\u003c\/dt\u003e\n\u003cdd\u003eNylon PA66 plastic water-pump housing\u003c\/dd\u003e\n\u003cdt\u003eImpeller Material\u003c\/dt\u003e\n\u003cdd\u003eNeoprene marine rubber\u003c\/dd\u003e\n\u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e198.4 g (7 oz)\u003c\/dd\u003e\n\u003cdt\u003eMaximum Listed Horsepower\u003c\/dt\u003e\n\u003cdd\u003e70 HP\u003c\/dd\u003e\n\u003cdt\u003eWarranty\u003c\/dt\u003e\n\u003cdd\u003e1 year; see the applicable warranty terms for conditions and coverage.\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Upper pump housing — 46-77822A1\u003c\/li\u003e\n\u003cli\u003e1 × Impeller — 47-89983\u003c\/li\u003e\n\u003cli\u003e2 × Drain gasket — 12-20260 \/ 12-19183\u003c\/li\u003e\n\u003cli\u003e1 × Lower water-pump base-to-face-plate gasket — 27-32769 \/ 27-19553\u003c\/li\u003e\n\u003cli\u003e1 × Upper face-plate-to-pump-body gasket — 27-32770\u003c\/li\u003e\n\u003cli\u003e1 × Water-pump base gasket — 27-32771 \/ 27-19551\u003c\/li\u003e\n\u003cli\u003e1 × Water-pump base gasket — 27-77417 \/ 27-19552\u003c\/li\u003e\n\u003cli\u003e1 × Rubber washer — 12-49221-1\u003c\/li\u003e\n\u003cli\u003e1 × Plate — 54705\u003c\/li\u003e\n\u003cli\u003e1 × O-ring — 25-26855\u003c\/li\u003e\n\u003cli\u003e1 × O-ring — 25-45711\u003c\/li\u003e\n\u003cli\u003e1 × O-ring — 25-26722\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect the negative battery cable and follow the engine manufacturer’s safety procedures before starting work.\u003c\/li\u003e\n\u003cli\u003eRemove the lower unit or gearcase from the outboard’s driveshaft housing. Disconnect the speedometer tube if required by the engine configuration.\u003c\/li\u003e\n\u003cli\u003eLocate and unbolt the water-pump housing assembly. Keep track of bolt locations because bolt lengths may differ.\u003c\/li\u003e\n\u003cli\u003eRemove the old housing and impeller from the driveshaft, then remove the old gaskets, wear plate, and applicable seals.\u003c\/li\u003e\n\u003cli\u003eClean all mating surfaces thoroughly. Remove old gasket material, debris, and corrosion without damaging the sealing surfaces.\u003c\/li\u003e\n\u003cli\u003eInstall the replacement gaskets, O-rings, plate, and other applicable components from the kit in the correct order for your engine.\u003c\/li\u003e\n\u003cli\u003eInstall the new impeller on the driveshaft. Rotate the shaft clockwise as needed to seat the impeller vanes in the housing.\u003c\/li\u003e\n\u003cli\u003eInstall the new pump housing and tighten the fasteners to the manufacturer’s specified torque.\u003c\/li\u003e\n\u003cli\u003eReinstall the lower unit, ensuring that the driveshaft, shift shaft, and water tube are correctly aligned.\u003c\/li\u003e\n\u003cli\u003eReconnect the battery. Start and test the engine only in an appropriate water supply or test tank, and confirm a steady tell-tale stream before normal operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I confirm whether this kit fits my engine?\u003c\/summary\u003e\u003cp\u003eCompare the complete engine model, horsepower, cylinder configuration, year where available, and serial number with the compatibility table. Serial-number verification is especially important because Mercury applications can vary within the same horsepower rating.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the signs of a failing water-pump impeller?\u003c\/summary\u003e\u003cp\u003eCommon signs include overheating at idle or low speed, a weak or missing tell-tale stream, and damage to the water-pump housing. Continued operation with inadequate cooling flow can cause severe engine damage.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow often should the impeller be replaced?\u003c\/summary\u003e\u003cp\u003eInspect the impeller as part of regular maintenance and replace it according to the engine manufacturer’s schedule and operating conditions. Frequent operation in sandy, silty, or salt water may require more frequent inspection and replacement.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes this kit replace Mercury part number 46-60366A1?\u003c\/summary\u003e\u003cp\u003eIt is listed as an aftermarket replacement for Mercury part number 46-60366A1 and the related references shown in the Part Number Matrix. Confirm the complete engine and serial-number application before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the pump housing included?\u003c\/summary\u003e\u003cp\u003eYes. The listed package contents include an upper pump housing, impeller, gaskets, plate, rubber washer, and O-rings. Component quantities and reference numbers are shown in the What’s in the Box section.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my exact model year is not shown?\u003c\/summary\u003e\u003cp\u003eSome Mercury applications are identified primarily by serial-number range rather than by a single model year. Compare your serial number and engine configuration with the applicable row before purchase. Do not rely on horsepower alone.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\u003cp\u003eNo. This listing is for an aftermarket replacement kit. Mercury and other manufacturer numbers are provided for reference and application comparison only.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow quickly is the kit shipped?\u003c\/summary\u003e\u003cp\u003eTypical international transit is 5–15 days. Standard shipping availability and any expedited options are shown at checkout and may vary by destination.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty and return coverage applies?\u003c\/summary\u003e\u003cp\u003eThe listed warranty is 1 year against manufacturing defects under normal use, subject to the applicable warranty terms. Returns are accepted according to the seller’s standard return policy; contact support with your order details for instructions.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the engine model, horsepower, cylinder configuration, serial number, and original component before ordering.\u003c\/li\u003e\n\u003cli\u003eDo not operate an outboard without an adequate cooling-water supply.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement kit, not a Mercury OEM component.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended, especially when removing and reinstalling the lower unit.\u003c\/li\u003e\n\u003cli\u003eIf the supplied parts differ from the parts required by your engine’s service information, stop installation and confirm fitment before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — Marine replacement parts selected for demanding service conditions and close attention to application details.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobal Fulfillment\u003c\/strong\u003e — Standard delivery is available to many regions, with typical transit of 5–15 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Practical aftermarket solutions supported by material and quality-control specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723964518715,"sku":"8E-JOL8-8LD2","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/8E-JOL8-8LD2.png?v=1763038548"},{"product_id":"water-pump-impeller-kit-fits-mercury-mariner-30-70-hp-replaces-47-89983t-47-89983","title":"Water Pump Impeller – Mercury\/Mariner Outboards, Replaces 47-89983T and 47-89983","description":"\u003c!-- 🔧 Table Styles (include only once per page) --\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis \u003cstrong\u003ewater pump impeller\u003c\/strong\u003e is an aftermarket replacement component for selected Mercury outboards and Mercury 30 Jet, 35 HP, 40 HP, 45 HP, and 50 HP applications. It is installed in the water-pump assembly to maintain cooling-water circulation through the engine.\u003c\/p\u003e\n  \u003cp\u003eThe impeller replaces Mercury OEM references \u003cstrong\u003e47-89983T\u003c\/strong\u003e and \u003cstrong\u003e47-89983\u003c\/strong\u003e. Sierra catalog information identifies the corresponding aftermarket impeller reference as \u003cstrong\u003e18-3007\u003c\/strong\u003e.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eReplacement water-pump impeller for selected Mercury applications.\u003c\/li\u003e\n    \u003cli\u003eSix-blade impeller design with a neoprene rubber body and metal hub insert, as described for this replacement style.\u003c\/li\u003e\n    \u003cli\u003eSupplied as the impeller component. A key, gaskets, water-pump housing, and other service parts are not included unless specifically shown in the order contents.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n  \u003cp\u003eThese references are included to help compare the impeller with the part removed from your outboard. Always confirm the complete engine model and serial-number range before ordering.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Part Number Cross-Reference\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eReference Type\u003c\/th\u003e\n\u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eOEM replacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e47-89983\u003c\/td\u003e\n\u003ctd\u003eOEM replacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-3007\u003c\/td\u003e\n\u003ctd\u003eAftermarket impeller reference\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThe catalog records below show the impeller reference in the listed Mercury diagrams. Model, horsepower, stroke, and serial-number conditions must be considered together; a part-number match by itself does not confirm fitment for every engine.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eSerial Condition\u003c\/th\u003e\n\u003cth\u003eOEM Part No.\u003c\/th\u003e\n\u003cth\u003eCatalog Application\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e30 Jet\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e0C159200 through 0G589999\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing and jet-components diagrams\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e30 Jet\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e9570790 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing and jet-components diagrams\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e35 (2-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e6445653 through 0B110788\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e35 (2-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e209608 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e35 (2-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e9384476 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003eB110789 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e9466647 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 (2-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e4860103 through 5556229\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing assembly diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 (2-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e5556230 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 (4-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e0C159200 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing and jet-components diagrams\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 (4-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e9570790 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing and jet-components diagrams\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e45 (4-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e5531630 through 0B110788\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e45 (4-Cylinder)\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e0B110789 and up\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing\/driveshaft diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e1421113 through 1639472\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing assembly diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e1639473 through 1755548\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing assembly diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e1770179 through 2116317\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing assembly diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e2116318 through 2305100\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing assembly diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e2305101 through 2858813\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing assembly diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003eNot specified in catalog record\u003c\/td\u003e\n\u003ctd\u003e2858814 through 4140999\u003c\/td\u003e\n\u003ctd\u003e47-89983T\u003c\/td\u003e\n\u003ctd\u003eGear housing assembly diagram\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n  \u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The records above establish catalog occurrences for the listed Mercury applications. They do not establish universal fitment for all Mercury or Mariner engines, all years, all strokes, or every 60–70 HP model. Compare your engine serial number and the original impeller before purchase.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n    \u003cdd\u003eWater pump impeller\u003c\/dd\u003e\n    \u003cdt\u003eReplacement Part Numbers\u003c\/dt\u003e\n    \u003cdd\u003eMercury 47-89983T and 47-89983\u003c\/dd\u003e\n    \u003cdt\u003eAftermarket Reference\u003c\/dt\u003e\n    \u003cdd\u003eSierra 18-3007\u003c\/dd\u003e\n    \u003cdt\u003eConstruction\u003c\/dt\u003e\n    \u003cdd\u003eNeoprene rubber impeller with metal hub insert\u003c\/dd\u003e\n    \u003cdt\u003eBlade Count\u003c\/dt\u003e\n    \u003cdd\u003e6 blades\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n    \u003cdd\u003eInstalled in the outboard water-pump assembly; follow the engine manufacturer's service procedure.\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x Water pump impeller\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eAn impeller key, gaskets, water-pump housing, and other service parts are not included unless they are expressly listed with your order.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eConfirm the engine model and serial number, then compare the old impeller with the replacement before beginning service.\u003c\/li\u003e\n    \u003cli\u003eDisconnect the battery and place the engine in neutral. Follow the manufacturer's safety instructions.\u003c\/li\u003e\n    \u003cli\u003eRemove the lower unit and water-pump cover according to the applicable service manual.\u003c\/li\u003e\n    \u003cli\u003eRemove the old impeller and inspect the key, pump plate, housing, and mating surfaces for wear or damage.\u003c\/li\u003e\n    \u003cli\u003eInstall the replacement impeller in the correct direction and position. Replace the key and gaskets separately if required and if they are not reusable.\u003c\/li\u003e\n    \u003cli\u003eReinstall the water-pump cover and lower unit using the manufacturer's torque specifications and alignment procedure.\u003c\/li\u003e\n    \u003cli\u003eRun the engine only with an appropriate cooling-water supply. Confirm a strong tell-tale stream and check for overheating or leaks before normal operation.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I confirm fitment?\u003c\/summary\u003e\n    \u003cp\u003eRead the model and serial number from the transom bracket or engine identification plate. Compare the complete information with the compatibility table and the part number on your original impeller. When the serial range, stroke, or model details do not match, do not assume the part will fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the signs of a failing water-pump impeller?\u003c\/summary\u003e\n    \u003cp\u003eCommon symptoms include overheating, a weak or missing tell-tale stream, reduced cooling-water flow, and a high-temperature warning where the engine is equipped with one.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow often should an impeller be replaced?\u003c\/summary\u003e\n    \u003cp\u003eImpellers are routine maintenance parts. Replacement intervals depend on the engine manufacturer's instructions and operating conditions. Inspect the impeller regularly, especially after operation in sandy, silty, or saltwater environments.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this listing include a key or gaskets?\u003c\/summary\u003e\n    \u003cp\u003eNo. This listing is for the impeller component only. A key, gaskets, and other water-pump service parts are not included unless separately stated in the order contents.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this an OEM Mercury part?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is an aftermarket replacement impeller. Mercury part numbers are shown only as identification and replacement references.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify the complete engine model, stroke, and serial-number range before ordering.\u003c\/li\u003e\n    \u003cli\u003eDo not operate an outboard without an adequate cooling-water supply.\u003c\/li\u003e\n    \u003cli\u003eInspect the pump housing, plate, key, and gaskets during installation and replace worn parts as necessary.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended if you are unfamiliar with lower-unit or water-pump service.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eMarine replacement parts selected for practical maintenance and repair applications.\u003c\/li\u003e\n    \u003cli\u003eProduct references are provided to help compare replacement parts with the original component.\u003c\/li\u003e\n    \u003cli\u003eAlways use the engine manufacturer's service information for installation, torque, and maintenance procedures.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723964911931,"sku":"24KM111-QM","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/24KM111-QM.png?v=1763038563"},{"product_id":"inline-fuel-filter-assembly-fits-mercury-mariner-30-60hp-replaces-35-879884t-879884t","title":"Inline Fuel Filter Assembly for Mercury\/Mariner 30–60 HP 4-Stroke Outboards – Replaces 35-879884T and 879884T","description":"\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis inline fuel filter assembly is designed for selected Mercury and Mariner 4-stroke EFI outboard applications. Installed under the engine cowl, it helps remove contaminants from the gasoline supply before fuel reaches the engine. The translucent bowl allows visual inspection for sediment or other visible contamination.\u003c\/p\u003e\n\u003cp\u003eUse the part-number references and the engine application information below to check compatibility before ordering. Model, horsepower, stroke, year, and serial-number conditions must all match your engine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInline installation under the engine cowl.\u003c\/li\u003e\n\u003cli\u003e20-micron filter element as listed for this application.\u003c\/li\u003e\n\u003cli\u003eTranslucent bowl for visual inspection of fuel condition.\u003c\/li\u003e\n\u003cli\u003eReplacement assembly for selected Mercury and Mariner outboards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eThe following numbers are cross-reference identifiers associated with this filter application. They are not a guarantee of fit by themselves; confirm the complete engine application and serial range.\u003c\/p\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury Marine\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003ctd\u003eReplacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury Marine\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003ctd\u003eReplacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuicksilver\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003ctd\u003eReplacement reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-79965\u003c\/td\u003e\n\u003ctd\u003eAftermarket cross-reference; verify application before purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe application information below covers selected Mercury and Mariner 4-stroke outboards. Serial-number ranges are included because the same horsepower rating may use different parts across model years and production ranges. The entries are application references, not a substitute for checking the identification label and the original filter.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n\u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility for Mercury and Mariner\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel \/ Application\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYear and Serial Range\u003c\/th\u003e\n\u003cth\u003eReference Part No.\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e30 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C456300 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e30 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0T409000 through 1B226999\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e30 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e30 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C109093 through 1C456299\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI JET\u003c\/td\u003e\n\u003ctd\u003e35 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C453840 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0T409000 through 1B226999\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1B227000 through 1B355027\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P401000 through 0P515896\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P515897 through 0P580772\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P515897 through 1C453839\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C000001 through 1C043416\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C000001 through 1C049738\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C000001 through 1C050251\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C043417 through 1C456299\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C049739 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C050252 through 1C453839\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C456300 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI JET\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C051324 through 1C453839\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI Sea Pro\u003c\/td\u003e\n\u003ctd\u003e40 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C453840 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0T409000 through 1B355222\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P401000 through 0P515896\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P515897 through 0P580772\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C000001 through 1C050251\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C050252 through 1C453839\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C453840 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e50 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2010; 7E51413VZ\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0T409000 through 1B355222\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P401000 through 0P515896\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 0P515897 through 0P580772\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C000001 through 1C050251\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2000–2014; 1C050252 through 1C453839\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard EFI\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C453840 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2007; 7E60452IZ\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMariner\u003c\/td\u003e\n\u003ctd\u003eOutboard\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2010; 7E60413VZ\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard Formula\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C104574 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard Racing\u003c\/td\u003e\n\u003ctd\u003e60R\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C615064 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eOutboard Sea Pro\u003c\/td\u003e\n\u003ctd\u003e60 HP\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e2014 and up; 1C453840 and up\u003c\/td\u003e\n\u003ctd\u003e879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n\u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eInline cartridge fuel filter assembly\u003c\/dd\u003e\n\u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eUnder-cowl, inline\u003c\/dd\u003e\n\u003cdt\u003eFiltration Rating\u003c\/dt\u003e\n\u003cdd\u003e20 micron, as listed for this application\u003c\/dd\u003e\n\u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\u003c\/dd\u003e\n\u003cdt\u003eConnection\u003c\/dt\u003e\n\u003cdd\u003eInline fuel-line connection\u003c\/dd\u003e\n\u003cdt\u003eHousing\u003c\/dt\u003e\n\u003cdd\u003ePlastic housing with translucent bowl\u003c\/dd\u003e\n\u003cdt\u003eVisual Inspection\u003c\/dt\u003e\n\u003cdd\u003eThe translucent bowl allows visible inspection of fuel condition and contamination.\u003c\/dd\u003e\n\u003cdt\u003eProduct Configuration\u003c\/dt\u003e\n\u003cdd\u003eSingle replacement filter assembly; not a fuel-pump assembly and not a multi-piece kit.\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e1 × inline cartridge fuel filter assembly\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eFuel lines, clamps, mounting hardware, and tools are not included unless specifically supplied with the original application.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eTurn the engine off, allow it to cool, and disconnect the battery where appropriate.\u003c\/li\u003e\n\u003cli\u003eWork outdoors or in a well-ventilated area away from flame, sparks, and ignition sources. Keep an appropriate fire extinguisher nearby.\u003c\/li\u003e\n\u003cli\u003ePlace an absorbent rag or suitable container below the filter to catch spilled fuel.\u003c\/li\u003e\n\u003cli\u003eLocate the existing filter assembly under the engine cowl and note the fuel-flow direction.\u003c\/li\u003e\n\u003cli\u003eDisconnect the fuel lines carefully and cap or protect the lines as necessary to limit fuel spillage.\u003c\/li\u003e\n\u003cli\u003eRemove the old assembly from its bracket or retaining position, if applicable.\u003c\/li\u003e\n\u003cli\u003eInstall the replacement with the flow direction matching the original installation or the arrow on the filter.\u003c\/li\u003e\n\u003cli\u003eReconnect and secure both fuel lines. Use suitable clamps where required by the engine manufacturer.\u003c\/li\u003e\n\u003cli\u003eIf the assembly has a threaded or screw-on bowl, tighten it by hand and do not overtighten.\u003c\/li\u003e\n\u003cli\u003ePrime the fuel system according to the engine service manual.\u003c\/li\u003e\n\u003cli\u003eInspect every connection for leaks before starting the engine.\u003c\/li\u003e\n\u003cli\u003eReconnect the battery if disconnected, start the engine, and check again for leaks while it idles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I confirm that this filter fits my engine?\u003c\/summary\u003e\u003cp\u003eCompare the original filter's part number with the Part Number Matrix, then match the engine brand, model or application, horsepower, 4-stroke configuration, year, and serial-number range in the compatibility table. If any condition differs, verify the application with the engine service information before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are common signs of a restricted fuel filter?\u003c\/summary\u003e\u003cp\u003ePossible symptoms include hard starting, stalling, rough idle, hesitation, misfiring, or loss of power under acceleration. Visible sediment or water in the bowl can also indicate fuel contamination. These symptoms may have other causes, so diagnose the complete fuel system.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow often should the filter be replaced?\u003c\/summary\u003e\u003cp\u003eReplacement timing depends on fuel quality, storage conditions, and engine use. Inspect the bowl periodically and replace the assembly if contamination is visible, fuel flow is restricted, or the engine manufacturer's maintenance schedule calls for replacement.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the filter element be cleaned?\u003c\/summary\u003e\u003cp\u003eThis listing is for a replacement cartridge-style assembly. Do not attempt to restore the filter element by washing or blowing it out unless the engine manufacturer specifically provides a service procedure for that filter.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy are there several entries for the same horsepower rating?\u003c\/summary\u003e\u003cp\u003eMercury and Mariner engines with the same rated horsepower can use different components depending on model type, EFI or JET configuration, production year, and serial-number range. Match the complete application rather than relying on horsepower alone.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\u003cp\u003eThis listing is for an aftermarket replacement assembly. Mercury, Mariner, Quicksilver, and Sierra names and part numbers are used only to identify the referenced applications and replacement relationships.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat warranty and return coverage applies?\u003c\/summary\u003e\u003cp\u003eWarranty, shipping, and return terms are determined by the seller's current store policies. Check the applicable policy information for the order before installation, and retain the packaging until fit and operation have been confirmed.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFuel is flammable. Work in a well-ventilated area and keep the product away from heat, flame, sparks, and smoking materials.\u003c\/li\u003e\n\u003cli\u003eRelieve or contain fuel pressure as required by the engine service procedure before disconnecting fuel lines.\u003c\/li\u003e\n\u003cli\u003eVerify the original part, fuel-line connections, flow direction, and complete engine application before installation.\u003c\/li\u003e\n\u003cli\u003eDo not operate the engine if fuel leaks are present. Professional installation is recommended when the correct service procedure is uncertain.\u003c\/li\u003e\n\u003cli\u003eThis is an aftermarket replacement filter assembly, not a fuel-pump assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarine replacement parts selected for practical service and repair applications.\u003c\/li\u003e\n\u003cli\u003eProduct information is organized around part-number references and engine application details.\u003c\/li\u003e\n\u003cli\u003eConfirm fitment and review current store policies before purchase and installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723965141307,"sku":"23FF161OC","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/23FF161OC.png?v=1763038571"},{"product_id":"fuel-filter-assembly-fits-mercury-mariner-30-60-hp-4-stroke-replaces-35-879884t-879884t","title":"Fuel Filter Assembly for Mercury 30–60 HP 4-Stroke EFI Outboards (Replaces 35-879884T)","description":"\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003efuel filter assembly\u003c\/strong\u003e is designed as a replacement for selected Mercury 30–60 HP 4-stroke EFI outboards. Mercury parts catalogs list the corresponding fuel filter in the fuel-pump assembly for the applicable engine models and serial-number ranges shown below.\u003c\/p\u003e\n\u003cp\u003eThe verified Mercury replacement reference for this application is \u003cstrong\u003e35-879884T\u003c\/strong\u003e. Always compare the part number, filter configuration, engine model, and serial number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eReplacement fuel filter assembly for selected Mercury EFI outboards.\u003c\/li\u003e\n    \u003cli\u003eApplications include 30 HP 3-cylinder and 40–60 HP 3- or 4-cylinder 4-stroke models, subject to the serial-number ranges listed below.\u003c\/li\u003e\n    \u003cli\u003eFor gasoline fuel systems; inspect the original part and service information to confirm the exact configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse this matrix to compare the verified manufacturer reference for this replacement.\u003c\/p\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:320px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Interchange\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003ePart Number\u003c\/th\u003e\n        \u003cth\u003eApplication\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e35-879884T\u003c\/td\u003e\n        \u003ctd\u003eFuel filter listed in the fuel-pump assembly\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe applications below are based on catalog occurrences for Mercury 4-stroke EFI outboards. Model, cylinder configuration, and serial-number range must be considered together. A model or horsepower match alone does not confirm fitment.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Compatible Mercury Engine Models\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003cth\u003eModel\u003c\/th\u003e\n        \u003cth\u003eRated HP\u003c\/th\u003e\n        \u003cth\u003eStroke\u003c\/th\u003e\n        \u003cth\u003eSerial Number Range\u003c\/th\u003e\n        \u003cth\u003eCatalog Location\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e30 EFI, 3-cylinder\u003c\/td\u003e\n        \u003ctd\u003e30\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0T409000–1B226999\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e30 EFI, 3-cylinder\u003c\/td\u003e\n        \u003ctd\u003e30\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P153500–0P400999\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e30 EFI, 3-cylinder\u003c\/td\u003e\n        \u003ctd\u003e30\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C109093 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0T409000–1B226999\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P153500–0P400999\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1B227000–1B344398\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C000001–1C043416\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C043417 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P401000–0P515896\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0T409000–1B344306\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C000001–1C050251\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C050252 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P515897 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e40 EFI, 4-cylinder JET\u003c\/td\u003e\n        \u003ctd\u003e40\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C051324 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e50\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0T409000–1B344306\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e50\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C000001–1C050251\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e50\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C050252 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e50\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P153500–0P400999\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e50\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P401000–0P515896\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e50\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P515897 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e60\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0T409000–1B344306\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e60\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C000001–1C050251\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e60\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e1C050252 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e60\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P153500–0P400999\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e60\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P401000–0P515896\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMercury\u003c\/td\u003e\n        \u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n        \u003ctd\u003e60\u003c\/td\u003e\n        \u003ctd\u003e4-Stroke\u003c\/td\u003e\n        \u003ctd\u003e0P515897 and up\u003c\/td\u003e\n        \u003ctd\u003eFuel Pump, fuel filter reference 35-879884T\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eTechnical Specs\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n  \u003cdd\u003eFuel filter assembly\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n  \u003cdd\u003eSelected Mercury EFI outboards\u003c\/dd\u003e\n  \u003cdt\u003eHorsepower Range\u003c\/dt\u003e\n  \u003cdd\u003e30–60 HP\u003c\/dd\u003e\n  \u003cdt\u003eEngine Type\u003c\/dt\u003e\n  \u003cdd\u003e4-stroke EFI\u003c\/dd\u003e\n  \u003cdt\u003eVerified Manufacturer Reference\u003c\/dt\u003e\n  \u003cdd\u003e35-879884T\u003c\/dd\u003e\n  \u003cdt\u003eCatalog Diagram\u003c\/dt\u003e\n  \u003cdd\u003eFuel Pump\u003c\/dd\u003e\n  \u003cdt\u003eFuel\u003c\/dt\u003e\n  \u003cdd\u003eGasoline\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cspan style=\"color:#d0021b;\"\u003e1 x\u003c\/span\u003e Fuel Filter Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n    \u003cli\u003eEnsure the engine is off and cool. Relieve fuel-system pressure if required by the service manual.\u003c\/li\u003e\n    \u003cli\u003ePlace an approved rag or container beneath the filter to catch fuel spillage.\u003c\/li\u003e\n    \u003cli\u003eRecord the fuel-line orientation before disconnecting the old filter.\u003c\/li\u003e\n    \u003cli\u003eRemove the old filter assembly according to the engine service manual.\u003c\/li\u003e\n    \u003cli\u003eInstall the replacement filter assembly in the same orientation and mounting position.\u003c\/li\u003e\n    \u003cli\u003eReconnect the fuel lines securely and inspect all connections.\u003c\/li\u003e\n    \u003cli\u003ePrime the fuel system according to the engine manual.\u003c\/li\u003e\n    \u003cli\u003eStart the engine and check carefully for fuel leaks before operating the boat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I confirm this filter fits my specific engine?\u003c\/summary\u003e\n  \u003cp\u003eCompare the original filter with the verified reference \u003cstrong\u003e35-879884T\u003c\/strong\u003e, then match your engine's model, cylinder configuration, stroke, and complete serial-number range against the compatibility table. If any detail differs, consult the engine service manual or a qualified marine technician before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eIs this an OEM Mercury part?\u003c\/summary\u003e\n  \u003cp\u003eNo. This is an aftermarket replacement listed for the Mercury reference shown above. Mercury and Mariner are trademarks of their respective owner and are used only to identify application compatibility.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eDoes the part fit every Mercury or Mariner 30–60 HP 4-stroke engine?\u003c\/summary\u003e\n  \u003cp\u003eNo. The 30–60 HP range is not sufficient by itself to confirm fitment. Serial-number ranges and engine configuration must match the applicable catalog listing. The verified catalog evidence available for this product covers the Mercury applications shown on this page; verify any Mariner application separately.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are common signs that a fuel filter may need replacement?\u003c\/summary\u003e\n  \u003cp\u003ePossible symptoms include hard starting, hesitation, loss of power, or stalling under load. These symptoms can have several causes, so inspect the fuel system and follow the engine manufacturer's diagnostic procedures.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eHow often should the filter be replaced?\u003c\/summary\u003e\n  \u003cp\u003eReplacement intervals vary by engine model, fuel quality, operating conditions, and the manufacturer's maintenance schedule. Follow the service interval in your engine manual and replace the filter sooner if contamination or restriction is found.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat are the shipping options?\u003c\/summary\u003e\n  \u003cp\u003eWe ship worldwide quickly—typical transit is 5–15 days. Standard shipping is free; expedited options appear at checkout where available.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003eWhat is the warranty and return policy?\u003c\/summary\u003e\n  \u003cp\u003eThis part is covered by a 1-year warranty against manufacturing defects under normal use. Returns are accepted within the standard return window when the part is unused and in its original condition. Contact support with your order details for assistance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eSafety \u0026amp; Important Info\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003eVerify the part number, physical configuration, engine model, and complete serial number before purchase.\u003c\/li\u003e\n    \u003cli\u003eFuel is flammable. Work in a well-ventilated area away from ignition sources and dispose of spilled fuel properly.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended for safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePro-Grade Standards\u003c\/strong\u003e — We supply marine parts engineered for dependable fit and function in real-world conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFast Global Fulfillment\u003c\/strong\u003e — Free standard delivery to most regions in 5–15 days.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eManufacturer-Direct Value\u003c\/strong\u003e — Fair pricing without compromising on materials or quality control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723965174075,"sku":"SS-23FF161","price":18.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/SS-23FF161.png?v=1763038572"},{"product_id":"cartridge-fuel-filter-assembly-fits-mercury-mariner-30-60-hp-4-stroke-outboards-replaces-35-879884t-879884t","title":"Inline Fuel Filter – Fits Mercury 30–60 HP 4-Stroke EFI Outboards – Replaces OEM 35-879884T","description":"\u003csection\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px){ table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis inline fuel filter is a replacement filter for selected Mercury 30–60 HP 4-stroke EFI outboards. It is identified in engine parts catalogs as a fuel filter installed in the fuel-pump system and is listed for multiple 3-cylinder and 4-cylinder applications. Confirm the engine's exact serial-number range and the original filter number before ordering.\u003c\/p\u003e\n\u003cp\u003eThis replacement is designed for applications using Mercury OEM part number \u003cstrong\u003e35-879884T\u003c\/strong\u003e. The same reference is also listed in aftermarket marine catalogs as \u003cstrong\u003eREC35-879884T\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInline fuel-filter design for selected 4-stroke EFI outboards.\u003c\/li\u003e\n  \u003cli\u003eApplicable to specific Mercury 30, 40, 50, and 60 HP engine applications.\u003c\/li\u003e\n  \u003cli\u003eVerify the OEM number and serial-number range before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n\u003cp\u003eUse the following verified reference to compare the replacement with your existing filter and engine parts catalog.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n    \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eReference Type\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury OEM reference\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eAftermarket catalog reference\u003c\/td\u003e\n\u003ctd\u003eREC35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe fitment information below reflects catalog occurrences for Mercury 4-stroke EFI engines. Serial-number ranges remain part of the fitment condition; horsepower and cylinder count alone do not confirm compatibility.\u003c\/p\u003e\n\u003cdiv class=\"ss-table-wrap\"\u003e\n  \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eSerial Number Range\u003c\/th\u003e\n\u003cth\u003eCatalog Part No.\u003c\/th\u003e\n\u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e30 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0T409000 through 1B226999\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e30 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e30 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C109093 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0T409000 through 1B226999\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1B227000 through 1B344398\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C000001 through 1C043416\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 3-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C043417 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P401000 through 0P515896\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0T409000 through 1B344306\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C000001 through 1C050251\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C050252 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P515897 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e40 EFI, 4-cylinder Jet\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C051324 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0T409000 through 1B344306\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P401000 through 0P515896\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P515897 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C000001 through 1C050251\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e50 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C050252 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0T409000 through 1B344306\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P153500 through 0P400999\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P401000 through 0P515896\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e0P515897 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C000001 through 1C050251\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e60 EFI, 4-cylinder\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1C050252 and up\u003c\/td\u003e\n\u003ctd\u003e35-879884T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdl\u003e\n  \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eInline fuel filter\u003c\/dd\u003e\n  \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eSelected Mercury 4-stroke EFI outboards\u003c\/dd\u003e\n  \u003cdt\u003eApplicable Horsepower\u003c\/dt\u003e\n\u003cdd\u003e30, 40, 50, and 60 HP applications listed above\u003c\/dd\u003e\n  \u003cdt\u003eFuel Type\u003c\/dt\u003e\n\u003cdd\u003eGasoline\u003c\/dd\u003e\n  \u003cdt\u003eInstallation Location\u003c\/dt\u003e\n\u003cdd\u003eFuel-pump\/fuel-system installation; confirm the original configuration before fitting\u003c\/dd\u003e\n  \u003cdt\u003eOEM Reference\u003c\/dt\u003e\n\u003cdd\u003e35-879884T\u003c\/dd\u003e\n  \u003cdt\u003eProduct Status\u003c\/dt\u003e\n\u003cdd\u003eAftermarket replacement\u003c\/dd\u003e\n\u003c\/dl\u003e\n\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × Inline fuel filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePackage contents are limited to the filter unless otherwise stated on the order or packaging. Fuel lines, clamps, seals, brackets, and other service parts are not included unless separately specified.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eConfirm the engine brand, model, stroke, serial number, and original filter number before beginning work.\u003c\/li\u003e\n  \u003cli\u003eTurn the engine off, allow it to cool, and disconnect the battery where appropriate.\u003c\/li\u003e\n  \u003cli\u003eWork in a well-ventilated area away from flames, sparks, and other ignition sources.\u003c\/li\u003e\n  \u003cli\u003ePlace an approved container or fuel-absorbent material beneath the filter to catch fuel.\u003c\/li\u003e\n  \u003cli\u003eMark the inlet and outlet hose positions before disconnecting the fuel lines.\u003c\/li\u003e\n  \u003cli\u003eRemove the existing filter and install the replacement in the same flow direction and orientation.\u003c\/li\u003e\n  \u003cli\u003eReconnect the fuel lines securely using suitable clamps or retaining hardware.\u003c\/li\u003e\n  \u003cli\u003ePrime the fuel system according to the engine service procedure.\u003c\/li\u003e\n  \u003cli\u003eBefore operating the engine, inspect all connections for fuel leakage. Stop immediately if a leak is found.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I confirm that this filter fits my engine?\u003c\/summary\u003e\u003cp\u003eMatch the original filter's OEM number to \u003cstrong\u003e35-879884T\u003c\/strong\u003e, then confirm the engine's exact model, stroke, and serial-number range against the compatibility table. Horsepower alone is not sufficient to confirm fitment.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this filter for 2-stroke engines?\u003c\/summary\u003e\u003cp\u003eThe verified catalog occurrences for this listing identify 4-stroke EFI applications. Do not install it on a 2-stroke engine unless the engine manufacturer's parts information specifically confirms the same part number.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this an OEM Mercury filter?\u003c\/summary\u003e\u003cp\u003eNo. This is an aftermarket replacement associated with Mercury OEM reference 35-879884T. Mercury and other brand names are used only to identify the compatible engine application and reference part number.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat symptoms can indicate a restricted fuel filter?\u003c\/summary\u003e\u003cp\u003ePossible symptoms include hard starting, hesitation, loss of power, rough running, or stalling. These symptoms can have several causes, so inspect the complete fuel system and follow the engine service manual before replacing parts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the package include seals, hoses, or clamps?\u003c\/summary\u003e\u003cp\u003eThe standard package contains one inline fuel filter only. Seals, hoses, clamps, brackets, and other installation parts are not included unless specifically listed with the order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use the listed fitment without checking the serial number?\u003c\/summary\u003e\u003cp\u003eNo. Several horsepower ratings have multiple serial-number ranges with separate catalog entries. Always compare the complete model and serial information before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel is flammable. Relieve fuel-system pressure and follow the engine manufacturer's service procedure before removal.\u003c\/li\u003e\n  \u003cli\u003eVerify the original part number, flow direction, connections, and physical configuration before installation.\u003c\/li\u003e\n  \u003cli\u003eDo not use this listing to confirm fitment for an engine outside the applications and serial-number ranges shown above.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended when the fuel-system service procedure is unfamiliar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine Parts Focus\u003c\/strong\u003e — Replacement components for selected outboard and marine applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication-Focused Listings\u003c\/strong\u003e — Product references and fitment conditions are provided to support careful part matching.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustomer Support\u003c\/strong\u003e — Contact support with your engine model, serial number, and original part number if you need help confirming the application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723965206843,"sku":"WL-ZI0U-3QZX","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/WL-ZI0U-3QZX.png?v=1763038574"},{"product_id":"water-pump-impeller-repair-kit-fits-mercury-mariner-30-60-hp-force-75-hp-replaces-mercury-46-812966a12-46-14334a3","title":"Water Pump Impeller Repair Kit for Mercury\/Mariner 30–60 HP 4-Stroke and Force 75 HP 2-Stroke Outboards","description":"\u003c!-- Table styles --\u003e\n\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td { padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top; }\n  table.ss-table th { white-space:nowrap; word-break:normal; letter-spacing:normal; font-weight:600; background:#f8fafc; }\n  @media (max-width:480px) { table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; } }\n\u003c\/style\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis water pump impeller repair kit is designed for specified Mercury and Mariner 30–60 HP 4-stroke outboards and selected Force 75 HP 2-stroke, 3-cylinder models. It combines the impeller, housing, base, faceplate, gaskets, seals, key, guide tube, and related hardware for a water pump rebuild.\u003c\/p\u003e\n  \u003cp\u003eThe kit is listed as a replacement for the following manufacturer and aftermarket references: Mercury 46-812966A12, 46-812966A10, 46-14334A3, 46-14334A2, 46-14334A1, 46-812966A6, 46-812966A5, 46-812966A4, and Sierra 18-3690. Reference numbers identify comparable part references; they do not replace model, year, and serial-number verification.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eComplete water pump rebuild kit with housing and related wear components.\u003c\/li\u003e\n    \u003cli\u003eIntended as a direct-replacement repair solution for the listed applications.\u003c\/li\u003e\n    \u003cli\u003eIncludes stainless-steel pump housing and faceplate components as listed below.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003ePart Number Matrix\u003c\/h2\u003e\n  \u003cp\u003eUse these references together with the engine compatibility information to confirm the correct application.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Part Number Matrix\"\u003e\n      \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-812966A10\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-14334A3\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-14334A2\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-14334A1\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-812966A6\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-812966A5\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003e46-812966A4\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eSierra\u003c\/td\u003e\n\u003ctd\u003e18-3690\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eEngine \u0026amp; Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThe applications below reflect the listed model, horsepower, stroke, year, and serial-number conditions. Always compare the complete engine identification and the original water pump components before ordering.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated HP\u003c\/th\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003cth\u003eModel and Serial Conditions\u003c\/th\u003e\n\u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF30 EFI\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e3-cylinder; S\/N 1C109093 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF35 EFI\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 1C453840 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF40\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e3-cylinder; S\/N 0P401000 and up, 1B227000–1B344306, or 1C000001 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF40 EFI\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e3-cylinder; S\/N 0P401000–0P515896, 1B227000–1B355027, or 1C000001 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF40 EFI\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 0P094500–1C453839, 0T409000–1B355222, 1C000001 and up, or 0T178500–0T598999\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF40 Jet\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI; S\/N 1C051324 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF40 Sea-Pro\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 1C453840 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF40\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 0P094500–0P206999 or 0T178500–0T598999\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF50 EFI\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 0P153500 and up, 0T409000–1B355222, 0P094500–0P206999, or 0T178500–0T598999\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 0P094500–0P206999 or 0T178500–0T598999\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF60 EFI\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 0P153500–1C453839, 0T409000–1B355222, or 1C000001 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF60 Sea-Pro\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI; S\/N 1C453840 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF60 Formula 60\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder EFI; S\/N 1C104574 and up\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003eF60\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e4-Stroke\u003c\/td\u003e\n\u003ctd\u003e1998+\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e4-cylinder; S\/N 0P094500–0P206999 or 0T178500–0T598999\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003eForce\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e2-Stroke\u003c\/td\u003e\n\u003ctd\u003e1988–1999\u003c\/td\u003e\n\u003ctd\u003e46-812966A12\u003c\/td\u003e\n\u003ctd\u003e3-cylinder; S\/N 0E288000–0E344999\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n\u003cdd\u003eWater pump impeller repair kit with housing\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n\u003cdd\u003eDirect replacement\u003c\/dd\u003e\n    \u003cdt\u003eHousing and Faceplate Material\u003c\/dt\u003e\n\u003cdd\u003eStainless steel\u003c\/dd\u003e\n    \u003cdt\u003eHousing Color\u003c\/dt\u003e\n\u003cdd\u003eSilver\/metallic\u003c\/dd\u003e\n    \u003cdt\u003eWeight\u003c\/dt\u003e\n\u003cdd\u003e0.67 kg (1.47 lb)\u003c\/dd\u003e\n    \u003cdt\u003eFitting Type\u003c\/dt\u003e\n\u003cdd\u003eDirect fit for the listed applications\u003c\/dd\u003e\n    \u003cdt\u003eApplication\u003c\/dt\u003e\n\u003cdd\u003eWater pump rebuild and cooling-system maintenance\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 × Housing (14334A3)\u003c\/li\u003e\n    \u003cli\u003e1 × Guide tube\/coupler (893857)\u003c\/li\u003e\n    \u003cli\u003e1 × Impeller (19453T)\u003c\/li\u003e\n    \u003cli\u003e2 × O-ring (805726)\u003c\/li\u003e\n    \u003cli\u003e1 × Key (19699)\u003c\/li\u003e\n    \u003cli\u003e3 × Seal (830749)\u003c\/li\u003e\n    \u003cli\u003e2 × Washer (8M0204720)\u003c\/li\u003e\n    \u003cli\u003e1 × Water pump base assembly (812966A7)\u003c\/li\u003e\n    \u003cli\u003e1 × Lower gasket (19701)\u003c\/li\u003e\n    \u003cli\u003e1 × Gasket (822189)\u003c\/li\u003e\n    \u003cli\u003e1 × Faceplate (19700A2)\u003c\/li\u003e\n    \u003cli\u003e4 × Washer (12-858234)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eDisconnect the battery and shift linkage.\u003c\/li\u003e\n    \u003cli\u003eRemove the lower unit or gearcase bolts and carefully separate the lower unit from the upper housing.\u003c\/li\u003e\n    \u003cli\u003eUnbolt the old water pump housing and lift it from the driveshaft.\u003c\/li\u003e\n    \u003cli\u003eRemove the old impeller, key, gaskets, and seals. Clean all mating surfaces thoroughly.\u003c\/li\u003e\n    \u003cli\u003eInstall the new gaskets, seals, and water pump base.\u003c\/li\u003e\n    \u003cli\u003eInstall the key on the driveshaft, then install the new impeller while turning the shaft clockwise so the vanes fold in the correct direction.\u003c\/li\u003e\n    \u003cli\u003eInstall the new housing and guide tube, making sure the seals are correctly seated.\u003c\/li\u003e\n    \u003cli\u003eTorque the housing bolts according to the engine manufacturer's specifications.\u003c\/li\u003e\n    \u003cli\u003eReinstall the lower unit and align the driveshaft, shift shaft, and water tube correctly.\u003c\/li\u003e\n    \u003cli\u003eSecure the lower-unit bolts to the manufacturer's specification.\u003c\/li\u003e\n    \u003cli\u003eReconnect the shift linkage and battery.\u003c\/li\u003e\n    \u003cli\u003eTest the engine with an appropriate water supply, such as flushing muffs or a test tank, before normal operation.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting \u0026amp; FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\u003csummary\u003eHow do I confirm this kit is correct for my engine?\u003c\/summary\u003e\u003cp\u003eCheck the engine brand, model, horsepower, stroke, year, and complete serial number against the compatibility table. The serial-number condition is important because similar horsepower models can use different water pump components.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eIs this an OEM part?\u003c\/summary\u003e\u003cp\u003eNo. This listing is for an aftermarket replacement kit. The OEM and aftermarket numbers shown are reference numbers used to help identify the intended application.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eDoes the kit include the housing?\u003c\/summary\u003e\u003cp\u003eYes. The listed contents include the water pump housing, base assembly, faceplate, impeller, key, guide tube, gaskets, seals, and washers.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eHow often should the water pump impeller be replaced?\u003c\/summary\u003e\u003cp\u003eImpeller service intervals depend on the engine manufacturer's recommendations, operating hours, storage conditions, and whether the engine is used in saltwater or freshwater. Inspect the cooling system regularly and replace worn, cracked, hardened, or damaged components.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eWhat are common signs of a failing water pump?\u003c\/summary\u003e\u003cp\u003ePossible symptoms include overheating at idle or low speed, a weak or missing tell-tale stream, and visible cracks, brittleness, or damaged vanes on the old impeller.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails\u003e\u003csummary\u003eIs professional installation recommended?\u003c\/summary\u003e\u003cp\u003eYes. Water pump service requires correct lower-unit removal, shaft alignment, seal installation, bolt torque, and post-installation cooling-system testing. Use the applicable service manual for detailed procedures and torque values.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eSafety \u0026amp; Important Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify the engine model, year, stroke, serial number, and original component appearance before ordering.\u003c\/li\u003e\n    \u003cli\u003eDo not operate the engine without an adequate water supply.\u003c\/li\u003e\n    \u003cli\u003eFollow the applicable service manual for disassembly, torque values, lubrication, and testing.\u003c\/li\u003e\n    \u003cli\u003eThis is an aftermarket replacement kit, not an OEM component.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended if you are not experienced with outboard lower-unit or water-pump service.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMarine Replacement Parts\u003c\/strong\u003e — Parts and kits selected for common outboard maintenance and repair applications.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication-Focused Listings\u003c\/strong\u003e — Model, horsepower, stroke, year, and serial-number information is provided to support fitment checks.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation Awareness\u003c\/strong\u003e — Always compare the replacement parts with the original components and follow the applicable service documentation.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50723965239611,"sku":"00Ax9EaIZ1m","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/00Ax9EaIZ1m.png?v=1763038575"}],"url":"https:\/\/seasierra.com\/collections\/mercury-35hp-4-stroke-outboard-engine.oembed","provider":"SeaSierra","version":"1.0","type":"link"}