{"title":"Suzuki 2-Stroke Outboard Marine Engine 115-350HP Parts","description":"\u003csection id=\"hero\" style=\"max-width: 900px; margin: 0 auto; padding: 16px 12px;\"\u003e\n  \u003cp\u003eThis page is for Suzuki 2-Stroke 115–350HP outboard engines. Use it to find compatible parts and service information. Below you’ll find maintenance tips, common replacement parts, and troubleshooting guidance. You can also browse the main Suzuki collection. Scroll to the bottom of this page to start browsing parts for this engine. On the collection page, use the “Filter \u0026amp; Sort” controls to narrow results by horsepower, year range, and part category\/section.\u003c\/p\u003e\n  \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-outboard-parts\" style=\"display:inline-block;padding:10px 16px;background:#005bbb;color:#fff;border-radius:4px;text-decoration:none;\"\u003eBrowse All Suzuki Parts\u003c\/a\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"identify-model\" style=\"max-width: 900px; margin: 0 auto; padding: 12px;\"\u003e\n  \u003ch2\u003eHow to Identify Your 115–350HP Model\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eNameplate location: Look on the transom clamp bracket or starboard swivel bracket for the model\/serial plate (and a secondary sticker under the cowling). Record the full model code and serial.\u003c\/li\u003e\n    \u003cli\u003eModel code basics: Suzuki 2‑Stroke models typically start with “DT” (e.g., DT115, DT200). Suffix letters indicate shaft length and options (S≈15\", L≈20\", X≈25\"; T=Power Trim\/Tilt; Z=counter‑rotation).\u003c\/li\u003e\n    \u003cli\u003ePlatform clues: 115–140 HP are commonly inline‑4; 150–225 HP are V6. If your model begins with “DF” (e.g., DF250\/DF300\/DF350), it’s a 4‑Stroke platform—use our filters in the \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-outboard-parts\"\u003eSuzuki collection\u003c\/a\u003e to locate the correct parts.\u003c\/li\u003e\n    \u003cli\u003eOil system: Most Suzuki 2‑Stroke models are oil‑injected. Inspect the remote oil tank, lines, and pump. Some regional models may be premix—follow your service manual ratio.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"engine-overview\" style=\"max-width: 900px; margin: 0 auto; padding: 12px;\"\u003e\n  \u003ch2\u003ePlatform Overview\u003c\/h2\u003e\n  \u003ch3\u003eInline‑4 (115–140 HP) 2‑Stroke\u003c\/h3\u003e\n  \u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eFeature\u003c\/th\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eDescription\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eConfiguration\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eInline‑4, loop‑charged, carbureted 2‑stroke with oil injection and CDI ignition.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eCommon Models\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eDT115, DT140 (various shaft lengths and trim\/tilt options).\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eAdvantages\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eLight weight, quick throttle response, strong mid‑range torque.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eNotes\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eIgnition, cooling, and some gearcase components share compatibility across DT115\/DT140—confirm by model and serial.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch3\u003eV6 (150–225 HP) 2‑Stroke\u003c\/h3\u003e\n  \u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eFeature\u003c\/th\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eDescription\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eConfiguration\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e60° V6 2‑stroke, oil injection; triple carburetors or early EFI depending on year; CDI\/ECU ignition.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eCommon Models\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eDT150, DT175, DT200, DT225.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eAdvantages\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eHigh power‑to‑weight ratio, robust lower units, strong mid‑ to top‑end.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eNotes\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eLower‑unit ratios, exhaust housing, and ignition components vary by year—match parts to your exact model code.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003cp style=\"margin-top:10px;\"\u003eIf your nameplate shows 250–350 HP with a DF prefix, you’re on the 4‑Stroke DF platform. Use the filters in the \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-outboard-parts\"\u003eSuzuki collection\u003c\/a\u003e to navigate to 4‑Stroke parts by horsepower and year.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"service-kits\" style=\"max-width: 900px; margin: 0 auto; padding: 12px;\"\u003e\n  \u003ch2\u003eRoutine Maintenance \u0026amp; Service Parts\u003c\/h2\u003e\n  \u003cp\u003eIntervals below are general guidelines for 2‑Stroke Suzuki outboards. Always follow the procedures and schedules in your official service manual.\u003c\/p\u003e\n  \u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eItem\u003c\/th\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eInterval*\u003c\/th\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eRemarks\u003c\/th\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eParts Link\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eGear oil (lower unit)\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eEvery 100 hrs or annually\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eInspect for water (milky oil). Replace seals if contamination is found.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-lower-unit-seal-kits\"\u003eSuzuki Lower Unit Seal Kits\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eSpark plugs\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eInspect 50 hrs; replace ~100 hrs\/annual\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eUse the specified heat range and gap; fouling indicates mixture\/oiling issues.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-spark-plug\"\u003eSuzuki Spark Plugs\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eFuel filter (in‑line\/under‑cowl)\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eEvery 100 hrs or annually\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eReplace sooner in high‑moisture or dirty‑fuel environments.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-fuel-filters\"\u003eSuzuki Fuel Filters\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eFuel pump (diaphragm) service\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e~200 hrs or 2 years\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eRebuild\/replace if starvation or surging at mid–WOT occurs.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-fuel-pumps\"\u003eSuzuki Fuel Pumps\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eWater pump impeller\/kit\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eAnnually or ~100 hrs\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eShorten interval in sandy\/silty water; inspect housing and wear plate.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-water-pump-repair-kits\"\u003eSuzuki Water Pump Repair Kits\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eThermostat\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e~2 years\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eStuck‑open causes cold running and smoke; stuck‑closed risks overheating.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-service-maintenance-kits\"\u003eSuzuki Service \u0026amp; Maintenance Kits\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eAnodes (external \u0026amp; internal)\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eInspect 50 hrs; replace when ≥50% depleted\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eMatch alloy to water type (salt\/brackish\/fresh) for best protection.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-anodes\"\u003eSuzuki Anodes\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eOil injection system (tank filter, lines, bleed)\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e100–200 hrs\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eInspect hoses for brittleness; bleed air after service; verify pump output.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003e\u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-hoses\"\u003eSuzuki Hoses\u003c\/a\u003e\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n  \u003cp style=\"font-size:12px;color:#666;margin-top:6px;\"\u003e*Intervals vary by model, hours, and environment. Follow the official Suzuki service manual for your exact engine.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"common-parts\" style=\"max-width: 900px; margin: 0 auto; padding: 12px;\"\u003e\n  \u003ch2\u003eFrequently Used Parts Categories\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eRoutine Service — \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-service-maintenance-kits\"\u003eSuzuki Service \u0026amp; Maintenance Kits\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eCooling System — \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-water-pump-repair-kits\"\u003eSuzuki Water Pump Repair Kits\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eFuel System — \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-fuel-filters\"\u003eSuzuki Fuel Filters\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eIgnition \/ Electrical — \u003ca href=\"https:\/\/seasierra.com\/collections\/electrical-items\"\u003eElectrical Items\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eGearcase \u0026amp; Seals — \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-lower-unit-seal-kits\"\u003eSuzuki Lower Unit Seal Kits\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eCorrosion Protection — \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-anodes\"\u003eSuzuki Anodes\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003cli\u003eHoses \u0026amp; Lines — \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-hoses\"\u003eSuzuki Hoses\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"troubleshooting\" style=\"max-width: 900px; margin: 0 auto; padding: 12px;\"\u003e\n  \u003ch2\u003eCommon Symptoms \u0026amp; Quick Checks\u003c\/h2\u003e\n  \u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eSymptom\u003c\/th\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eCheck First\u003c\/th\u003e\n        \u003cth style=\"text-align:left;border-bottom:1px solid #ddd;padding:6px;\"\u003eRelated Parts\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eWeak telltale \/ overheat alarm\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eInspect intake screens, telltale nozzle, water pump impeller, and thermostat.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eWater pump kit, impeller housing\/plate, thermostat, intake screen.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003ePoor acceleration \/ power loss\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eCheck prop condition\/ventilation, fuel filter, primer bulb, plugs; verify throttle opening.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eFuel filter, fuel pump, spark plugs, propeller.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eHard starting \/ rough idle\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eVerify choke\/enrichment operation, prime bulb firmness, clean idle circuits; check for air leaks.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eSpark plugs, fuel filter, primer bulb, carb\/idle circuit kit.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eExcessive smoke\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eConfirm correct oil type, check oil injection pump setting and hoses; ensure thermostat isn’t stuck open.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eOil pump\/lines, thermostat, spark plugs.\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eGearcase noise \/ metal in oil\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eDrain and inspect gear oil for metal or water; check seals and prop shaft for fishing line.\u003c\/td\u003e\n        \u003ctd style=\"padding:6px;border-bottom:1px solid #eee;\"\u003eLower unit seal kit, bearings, drain plug gaskets.\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"faq\" style=\"max-width: 900px; margin: 0 auto; padding: 12px;\"\u003e\n  \u003ch2\u003eFAQs\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre parts interchangeable between different years or platforms?\u003c\/summary\u003e\n    \u003cp\u003eMany service items are shared within families (e.g., DT115\/DT140 or DT150–DT225), but ignition, gearcase, and cooling parts can change by year and model code. Always match parts to the exact model suffix, shaft length, and serial range.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhen should the impeller be replaced?\u003c\/summary\u003e\n    \u003cp\u003eAs a preventative measure, replace the impeller annually or every ~100 hours. In sandy or silty water, shorten the interval and inspect the wear plate and housing for grooves.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow often should the gear oil be changed?\u003c\/summary\u003e\n    \u003cp\u003eChange lower‑unit gear oil at least every 100 hours or annually. If the oil appears milky or contaminated, service the seals before returning to use.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat information helps confirm part compatibility?\u003c\/summary\u003e\n    \u003cp\u003eProvide the full model code (including suffix), serial number, shaft length (S\/L\/X), control type (tiller\/remote), and note whether the engine is oil‑injected or premix. Photos of the nameplate and the part area also help.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\n\u003csection id=\"cta\" style=\"max-width: 900px; margin: 0 auto; padding: 12px;\"\u003e\n  \u003cp\u003eReady to find parts by horsepower, year, and model? Browse the main Suzuki collection and use Filter \u0026amp; Sort to narrow to your exact 2‑Stroke outboard.\u003c\/p\u003e\n  \u003ca href=\"https:\/\/seasierra.com\/collections\/suzuki-outboard-parts\" style=\"display:inline-block;padding:10px 16px;background:#005bbb;color:#fff;border-radius:4px;text-decoration:none;\"\u003eShop Suzuki Outboard Parts\u003c\/a\u003e\n  \u003cp style=\"margin-top:8px;color:#444;\"\u003eIf you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.\u003c\/p\u003e\n\u003c\/section\u003e","products":[{"product_id":"wedge-transom-saver-fits-yamaha-mercury-honda-johnson-suzuki-replaces-mar-mtspt-ym-08","title":"Wedge Transom Saver Motor Support – Fits Yamaha, Mercury, Honda, Johnson\/Evinrude \u0026 Suzuki Outboards","description":"\u003cstyle\u003e\n  .ss-table-wrap { overflow-x:auto; -webkit-overflow-scrolling:touch; }\n  table.ss-table { width:100%; border-collapse:collapse; min-width:640px; }\n  table.ss-table th, table.ss-table td {\n    padding:10px 12px; border:1px solid #e5e7eb; text-align:left; vertical-align:top;\n  }\n  table.ss-table th {\n    white-space:nowrap;\n    word-break:normal;\n    letter-spacing:normal;\n    font-weight:600;\n    background:#f8fafc;\n  }\n  @media (max-width:480px){\n    table.ss-table th, table.ss-table td { padding:8px 10px; font-size:14px; }\n  }\n\u003c\/style\u003e\n\u003csection\u003e\n  \u003ch2\u003eProduct Details\u003c\/h2\u003e\n  \u003cp\u003eThis \u003cstrong\u003eWedge Transom Saver Motor Support\u003c\/strong\u003e is designed to support trailered outboard motors equipped with 2- or 3-ram hydraulic trim\/tilt systems. It fits over an extended trim\/tilt piston rod and provides a stable support point between the engine and transom area, helping reduce movement and the effects of road shock and vibration during transport.\u003c\/p\u003e\n  \u003cp\u003eThe wedge-style design is intended for a broad range of Yamaha, Mercury, Honda, Johnson\/Evinrude, and Suzuki outboards. Confirm your engine's trim\/tilt configuration and installation position before ordering.\u003c\/p\u003e\n  \u003cp\u003eThis aftermarket support is listed as a replacement reference for Yamaha \u003cstrong\u003eMAR-MTSPT-YM-08\u003c\/strong\u003e. Reference numbers identify comparable applications and should be checked against the original component and your engine configuration.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eSlides over the extended trim\/tilt piston rod for installation.\u003c\/li\u003e\n    \u003cli\u003eWedge-shaped, self-centering support design.\u003c\/li\u003e\n    \u003cli\u003eIncludes two steering stabilizers\/centering clips to help limit engine steering movement while trailering.\u003c\/li\u003e\n    \u003cli\u003eConstructed from durable plastic and EPDM rubber for marine and outdoor use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003ePart Number References\u003c\/h2\u003e\n  \u003cp\u003eUse these references as comparison information only. Always verify physical design, ram arrangement, and application details before purchase.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Part Number References\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand or Source\u003c\/th\u003e\n          \u003cth\u003eReference\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003eMAR-MTSPT-YM-08\u003c\/td\u003e\n          \u003ctd\u003eOEM reference\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAftermarket\u003c\/td\u003e\n          \u003ctd\u003eM-Y Wedge Universal Motor Support\u003c\/td\u003e\n          \u003ctd\u003eComparable replacement reference\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eEngine and Model Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThe following application ranges are provided as general guidance for compatible 2- and 3-ram hydraulic trim\/tilt systems. Exact fit can vary by model, year, ram arrangement, and installation position. Verify your engine before purchase.\u003c\/p\u003e\n  \u003cdiv class=\"ss-table-wrap\"\u003e\n    \u003ctable class=\"ss-table\" aria-label=\"Engine and Model Compatibility\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eBrand\u003c\/th\u003e\n          \u003cth\u003eModel or Range\u003c\/th\u003e\n          \u003cth\u003eRated HP\u003c\/th\u003e\n          \u003cth\u003eStroke\u003c\/th\u003e\n          \u003cth\u003eApplication Notes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003eCompatible outboards, including SHO applications\u003c\/td\u003e\n          \u003ctd\u003e115–350\u003c\/td\u003e\n          \u003ctd\u003e2- and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eFor compatible 2- or 3-ram trim\/tilt systems.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eYamaha\u003c\/td\u003e\n          \u003ctd\u003eF300–F350\u003c\/td\u003e\n          \u003ctd\u003e300–350\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eSome V8 applications may require two supports, one for each ram.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMercury\u003c\/td\u003e\n          \u003ctd\u003eCompatible outboards\u003c\/td\u003e\n          \u003ctd\u003e135–300\u003c\/td\u003e\n          \u003ctd\u003e2- and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eFor compatible 2- or 3-ram trim\/tilt systems; installation is commonly on the starboard side.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHonda\u003c\/td\u003e\n          \u003ctd\u003eCompatible outboards\u003c\/td\u003e\n          \u003ctd\u003e90–300\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eFor compatible 2- or 3-ram trim\/tilt systems; installation is commonly on the starboard side.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eJohnson\/Evinrude\u003c\/td\u003e\n          \u003ctd\u003eCompatible outboards, including E-TEC and FICHT applications\u003c\/td\u003e\n          \u003ctd\u003e150–300\u003c\/td\u003e\n          \u003ctd\u003e2- and 4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eFor compatible 2- or 3-ram trim\/tilt systems; installation is commonly on the starboard side.\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSuzuki\u003c\/td\u003e\n          \u003ctd\u003eDF140–DF350\u003c\/td\u003e\n          \u003ctd\u003e140–350\u003c\/td\u003e\n          \u003ctd\u003e4-Stroke\u003c\/td\u003e\n          \u003ctd\u003eFor compatible 2- or 3-ram trim\/tilt systems.\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eProduct Type\u003c\/dt\u003e\n    \u003cdd\u003eWedge transom saver and outboard motor support\u003c\/dd\u003e\n    \u003cdt\u003eInstallation\u003c\/dt\u003e\n    \u003cdd\u003eSlides over an extended trim\/tilt piston rod\u003c\/dd\u003e\n    \u003cdt\u003eApplication\u003c\/dt\u003e\n    \u003cdd\u003eCompatible 2- or 3-ram hydraulic trim\/tilt systems\u003c\/dd\u003e\n    \u003cdt\u003eDesign\u003c\/dt\u003e\n    \u003cdd\u003eWedge-shaped, self-centering support\u003c\/dd\u003e\n    \u003cdt\u003eConstruction\u003c\/dt\u003e\n    \u003cdd\u003ePlastic and EPDM rubber\u003c\/dd\u003e\n    \u003cdt\u003eColor\u003c\/dt\u003e\n    \u003cdd\u003eBlack\u003c\/dd\u003e\n    \u003cdt\u003eReference Length\u003c\/dt\u003e\n    \u003cdd\u003eApproximately 8.5 inches (215.9 mm), subject to product variation\u003c\/dd\u003e\n    \u003cdt\u003eIncluded Stabilizers\u003c\/dt\u003e\n    \u003cdd\u003eTwo steering stabilizers\/centering clips\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 x Wedge Transom Saver Motor Support\u003c\/li\u003e\n    \u003cli\u003e2 x Steering Stabilizers\/Cent​​ering Clips\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eTrim the outboard to its maximum tilt position so the hydraulic ram or rams are fully extended.\u003c\/li\u003e\n    \u003cli\u003eIdentify the correct trim\/tilt piston for your engine. On many applications, the support is installed on the main or starboard-side ram.\u003c\/li\u003e\n    \u003cli\u003eClean the exposed piston rod and remove grease, dirt, or debris that could prevent a secure fit.\u003c\/li\u003e\n    \u003cli\u003eSlide the wedge support over the exposed piston rod. Ensure that it is seated and aligned correctly.\u003c\/li\u003e\n    \u003cli\u003eSlowly lower the motor until the support rests securely between the motor and transom mount. Do not force the motor against the support.\u003c\/li\u003e\n    \u003cli\u003eInstall the two included steering stabilizers\/centering clips on the hydraulic steering rods as appropriate for your steering system.\u003c\/li\u003e\n    \u003cli\u003eConfirm that the support and stabilizers remain secure before towing, and recheck them periodically during extended transport.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eTroubleshooting and FAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich outboard motors is this transom saver designed for?\u003c\/summary\u003e\n    \u003cp\u003eIt is designed for compatible Yamaha, Mercury, Honda, Johnson\/Evinrude, and Suzuki outboards using 2- or 3-ram hydraulic trim\/tilt systems. Review the application table and compare your engine's ram arrangement before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow is the wedge support installed?\u003c\/summary\u003e\n    \u003cp\u003eRaise the motor, extend the appropriate trim\/tilt ram, slide the wedge over the exposed piston rod, and lower the motor gently until it rests securely on the support. Install the two included steering stabilizers on the steering rods where appropriate.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes this support work on a single-ram tilt system?\u003c\/summary\u003e\n    \u003cp\u003eNo. This support is intended for compatible 2- or 3-ram hydraulic trim\/tilt arrangements and should not be used on a single-ram setup unless the application is specifically confirmed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the included steering stabilizers for?\u003c\/summary\u003e\n    \u003cp\u003eThe two included stabilizers\/centering clips help limit steering movement and side-to-side engine sway during trailering when installed correctly on the steering rods.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need one or two supports?\u003c\/summary\u003e\n    \u003cp\u003eMost compatible applications use one support. Certain large engines or configurations, including some Yamaha V8 applications, may require two supports—one for each ram. Check the engine manufacturer's guidance and the physical ram arrangement.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the support made of?\u003c\/summary\u003e\n    \u003cp\u003eThe support uses a combination of plastic and EPDM rubber intended for marine and outdoor trailering conditions.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this an OEM component?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is an aftermarket replacement support. Yamaha MAR-MTSPT-YM-08 is provided as a reference number for application comparison and does not indicate that this product is manufactured by Yamaha.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow should I verify compatibility?\u003c\/summary\u003e\n    \u003cp\u003eCompare the original support, piston-rod dimensions, ram arrangement, installation position, and engine model details. Do not rely on horsepower alone; year, model, stroke, and trim\/tilt configuration can affect fit.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSafety and Important Information\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eVerify the engine model, year, horsepower, stroke, ram arrangement, and physical dimensions before ordering.\u003c\/li\u003e\n    \u003cli\u003eDo not use this support on a single-ram system unless compatibility has been specifically confirmed.\u003c\/li\u003e\n    \u003cli\u003eInspect the support and steering stabilizers for damage, looseness, or deterioration before each trip.\u003c\/li\u003e\n    \u003cli\u003eLower the motor gently onto the support; do not use excessive force or rely on the support as a substitute for proper trailering procedures.\u003c\/li\u003e\n    \u003cli\u003eProfessional installation is recommended when the correct installation position is unclear.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eAbout Sea Sierra\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMarine Parts Selection\u003c\/strong\u003e — Practical replacement components for real-world boating and trailering applications.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eApplication-Focused Support\u003c\/strong\u003e — Product information is organized to help you compare engine configuration and installation requirements.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eValue-Oriented Parts\u003c\/strong\u003e — Aftermarket solutions selected for everyday marine maintenance and repair needs.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e","brand":"SeaSierra","offers":[{"title":"Default Title","offer_id":50718265114939,"sku":"22TS001","price":36.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0826\/8673\/8747\/files\/Transom_Rubber_Support_and_Motor_Lock_for_Boat_Outboards_and_Stern_Drives_with_3_Rams_Trim_and_Tilt_Plastic_Saver_Protect_Bar_-_JLM_MARINE-8286846.jpg?v=1762958498"}],"url":"https:\/\/seasierra.com\/collections\/suzuki-2-stroke-outboard-marine-engine-115-350hp-parts.oembed","provider":"SeaSierra","version":"1.0","type":"link"}