Aftermarket Water Pump Impeller for Suzuki DT9.9, DT14, DT16, DT25 & DT28 2-Stroke Outboards
Aftermarket Water Pump Impeller for Suzuki DT9.9, DT14, DT16, DT25 & DT28 2-Stroke Outboards is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
Aftermarket Water Pump Impeller for Suzuki DT9.9, DT14, DT16, DT25 ...
Aftermarket Water Pump Impeller for Suzuki DT9.9, DT14, DT16, DT25 & DT28 2-Stroke Outboards is backordered and will ship as soon as it is back in stock.
Product Details
This aftermarket water pump impeller is designed for selected Suzuki 2-stroke outboard motors. It is listed for Suzuki DT9.9, DT14, DT16, DT25 and DT28 models within the year ranges shown below. The impeller is supplied as a single replacement component for the water pump and should be matched to the engine model, year and original part number before installation.
The impeller is identified as an aftermarket replacement reference 18-3092 and is associated with Suzuki OEM part numbers 17461-93001, 17461-93002, 17461-93003 and 17461-93004. These references should be used for comparison only; always confirm the original part number and physical dimensions before ordering.
- Replacement water pump impeller for selected Suzuki 2-stroke outboards.
- Single impeller supplied; this is not a complete water pump kit.
- Designed as a direct replacement when the model, year and part number match.
- Inspect the water pump housing, wear plate and keyway during installation and replace worn related components as necessary.
Part Number Matrix
The following references are associated with this impeller. Part-number matching should be confirmed against the original component before installation.
| Reference Type | Part Number |
|---|---|
| Aftermarket reference | 18-3092 |
| Suzuki OEM reference | 17461-93001 |
| Suzuki OEM reference | 17461-93002 |
| Suzuki OEM reference | 17461-93003 |
| Suzuki OEM reference | 17461-93004 |
Engine & Model Compatibility
Compatibility is limited to the Suzuki 2-stroke applications listed below. Keep the model, horsepower and year range together when checking fitment. If your engine falls outside these ranges, verify the original part number and dimensions before purchase.
| Brand | Model | Rated HP | Stroke | Years | Associated OEM References |
|---|---|---|---|---|---|
| Suzuki | DT9.9 | 9.9 HP | 2-Stroke | 1980–1987 | 17461-93001, 17461-93002, 17461-93003, 17461-93004 |
| Suzuki | DT14 | 14 HP | 2-Stroke | 1977–1980 | 17461-93001, 17461-93002, 17461-93003, 17461-93004 |
| Suzuki | DT16 | 16 HP | 2-Stroke | 1977–1982 | 17461-93001, 17461-93002, 17461-93003, 17461-93004 |
| Suzuki | DT25 | 25 HP | 2-Stroke | 1977–1982 | 17461-93001, 17461-93002, 17461-93003, 17461-93004 |
| Suzuki | DT28 | 28 HP | 2-Stroke | 1972–1982 | 17461-93001, 17461-93002, 17461-93003, 17461-93004 |
Technical Specs
- Product Type
- Water pump impeller
- Application
- Selected Suzuki 2-stroke outboard motors
- Product Configuration
- Single replacement impeller
- Aftermarket Reference
- 18-3092
- Associated OEM References
- 17461-93001, 17461-93002, 17461-93003 and 17461-93004
- Installation
- Replacement component for the water pump assembly
- Material
- Not specified in the available product record
What’s in the Box
- 1 x Water pump impeller
No complete water pump housing, wear plate, gasket set or additional hardware is specified as included. Confirm whether the existing key and related hardware are serviceable before installation.
Installation Notes
- Confirm the engine model, year, stroke and original impeller reference before beginning work.
- Disconnect the battery or ignition system and secure the outboard according to the manufacturer’s service procedure.
- Remove the lower unit and water pump cover using the correct service-manual procedure for your engine.
- Record the original impeller blade orientation and inspect the impeller, key, housing and wear plate.
- Remove debris and corrosion from the water pump chamber. Replace damaged seals or worn components as required.
- Install the replacement impeller with the drive key correctly seated and the blades oriented according to the manufacturer’s instructions.
- Reinstall the water pump cover and lower unit. Tighten fasteners to the manufacturer’s specified torque.
- Run the engine only in a suitable test tank or water source and confirm a steady cooling-water tell-tale stream before normal operation.
Because water pump designs and service procedures can vary by model and year, consult the correct Suzuki service manual or use a qualified marine technician if you are unsure about the installation.
Troubleshooting & FAQ
Which Suzuki outboards does this impeller fit?
The listed applications are Suzuki 2-stroke DT9.9 models from 1980–1987, DT14 models from 1977–1980, DT16 models from 1977–1982, DT25 models from 1977–1982 and DT28 models from 1972–1982. Verify the original part number before ordering.
Is this a complete water pump kit?
No. This product is a single replacement water pump impeller. A housing, wear plate, gasket, key or other water pump components are not specified as included.
What part numbers should I compare?
Compare your original impeller with aftermarket reference 18-3092 and Suzuki OEM references 17461-93001, 17461-93002, 17461-93003 and 17461-93004. Do not rely on the model name alone when different production years or lower-unit configurations may exist.
What are common signs of an impeller problem?
Possible signs include a weak or intermittent tell-tale stream, overheating, an overheating warning or steam. Stop operation if the engine overheats and inspect the cooling system before further use.
How often should a water pump impeller be replaced?
Replacement timing depends on the manufacturer’s maintenance schedule and operating conditions. Inspect the impeller regularly and replace it if the blades are cracked, hardened, deformed or damaged, or whenever the service manual specifies.
Is this an OEM Suzuki part?
No. This is an aftermarket replacement impeller. Suzuki part numbers are provided as application references only.
Safety & Important Information
- Verify the engine model, year, stroke, original part number and dimensions before purchase.
- Do not operate an outboard with inadequate cooling-water flow or an overheating condition.
- Use the correct service procedure and torque specifications for your specific engine.
- Professional installation is recommended if you are not experienced with outboard lower-unit or water-pump service.
About Sea Sierra
- Marine Replacement Parts — Practical aftermarket components for routine marine maintenance and repair.
- Application-Focused Listings — Product information is organized around engine model and part-number verification.
- Fitment First — Compare your existing component and service requirements before installation.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
