SkegGuard 27071 Stainless Steel Replacement Skeg – Fits Mercury, Force, Honda & Nissan/Tohatsu
SkegGuard 27071 Stainless Steel Replacement Skeg – Fits Mercury, Force, Honda & Nissan/Tohatsu is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
SkegGuard 27071 Stainless Steel Replacement Skeg – Fits Mercury, Fo...
SkegGuard 27071 Stainless Steel Replacement Skeg – Fits Mercury, Force, Honda & Nissan/Tohatsu is backordered and will ship as soon as it is back in stock.
Product Details
Protect or repair your lower unit's skeg with the SkegGuard 27071 Stainless Steel Replacement Skeg. This bolt-on guard is designed for selected Mercury/Mariner, Honda, Force, and Nissan/Tohatsu outboard applications. It helps shield the lower skeg from damage caused by rocks, underwater debris, and ramp contact while restoring the lower portion of a damaged skeg.
The guard slides over the remaining portion of the original skeg and is secured through the existing skeg with mounting hardware. Confirm your exact engine model, year, horsepower, stroke, and skeg profile before ordering.
- Bolt-on replacement and protective skeg guard for selected outboards.
- Constructed from mirror-polished 316 marine-grade stainless steel.
- Reinforced 3 mm lower wear tab for added protection.
- Drain hole helps reduce water retention inside the guard.
- Designed for a DIY installation that can be completed in approximately 10 minutes when the original skeg is suitable for repair.
Part Number References
The following reference identifies the product and a comparable aftermarket design. These references are not a statement that this product is an OEM component.
| Brand or Description | Reference |
|---|---|
| SkegGuard | 27071 |
| Comparable aftermarket design | Gator Guards SkegShield |
Engine & Model Compatibility
The application ranges below are provided as a fitment guide. Model variations, gearcase dimensions, shaft configuration, and production changes can affect compatibility. Compare your original skeg and verify the exact engine application before installation.
Fits selected Mercury/Mariner models from 40–125 HP, Honda models from 60–115 HP, Force models from 70–90 HP, and Nissan/Tohatsu models from 70–140 HP.
| Brand | Model | Rated HP | Stroke | Years | Reference | Notes |
|---|---|---|---|---|---|---|
| Mercury | 40-50-60 BigFoot | 40-60 | 4-Stroke | 2001–2013 | 27071 | |
| Mercury | 40-50 Command Thrust | 40-50 | 4-Stroke | 2014–Present | 27071 | |
| Mercury | 50 | 50 | 4-Stroke | 1999–2013 | 27071 | |
| Mercury | 60 Command Thrust | 60 | 4-Stroke | 2014–Present | 27071 | |
| Mercury | 75 | 75 | 2 & 4-Stroke | 2003–2013 | 27071 | |
| Mercury | 90 | 90 | 2 & 4-Stroke | 2001–2013 | 27071 | |
| Mercury | 115 | 115 | 2 & 4-Stroke | 2002–2013 | 27071 | |
| Mercury | 115 | 115 | 2-Stroke | 2014–2016 | 27071 | |
| Mercury | 125 | 125 | 2-Stroke | 2003–2005 | 27071 | |
| Mercury/Mariner | 70-90-100-115-125, including selected Optimax models | 70-125 | 2 & 4-Stroke | 1983–Present | 27071 | Verify gearcase and skeg profile. |
| Mercury/Mariner | Sea Pro 4.25-inch gearcase | Various | Various | 2001–Present | 27071 | Verify dimensions before ordering. |
| Honda | BF75-BF90-BF115 | 75-115 | 4-Stroke | 1995–2007 | 27071 | |
| Honda | BF60-BF75 | 60-75 | 4-Stroke | 2010–Present | 27071 | |
| Honda | BF60BFP Power Thrust | 60 | 4-Stroke | 2010–Present | 27071 | |
| Honda | BF100 | 100 | 4-Stroke | 2007–Present | 27071 | 4-cylinder application. |
| Force | 70-90 | 70-90 | 2-Stroke | 1998–2002 | 27071 | |
| Nissan/Tohatsu | Various models | 70-90-115-120-140 | 2-Stroke | 1993–Present | 27071 | Verify the exact gearcase. |
| Nissan/Tohatsu | Various BFT models | 75-90 | 4-Stroke | 2014–2019 | 27071 | Verify the exact model and skeg profile. |
Technical Specifications
- Product Type
- Replacement and protective skeg guard
- Installation
- Bolt-on installation through the existing skeg
- Material
- 316 marine-grade stainless steel
- Finish
- Mirror polished
- Reinforcement
- 3 mm reinforced lower wear tab
- Drainage
- Integrated drain hole
- Minimum Remaining Skeg
- 2–3 inches (51–76 mm)
- Hardware
- Self-locking mounting bolts included
- Warranty
- 3 years against manufacturing defects under normal use
What's in the Box
- 1 x SkegGuard 27071 stainless steel replacement skeg guard
- 1 x hardware kit with mounting bolts and threadlocker
- 1 x installation instructions
Installation Notes
- Remove any jagged or rough edges from the damaged skeg to create a flat mounting surface.
- Place the guard over the remaining skeg and confirm that it seats fully. At least 2–3 inches of the original skeg must remain.
- Use a rubber mallet to tap the front and rear of the guard into position if necessary.
- Mark the two mounting holes, then remove the guard.
- Drill the marked holes through the original skeg using the appropriate bit for the included hardware.
- Apply the included threadlocker to the bolt threads.
- Reposition the guard, align the holes, and tighten the mounting bolts securely without overtightening.
Troubleshooting & FAQ
How much of my original skeg must remain?
A minimum of 2–3 inches (51–76 mm) of the original skeg must remain for a secure installation.
Can this guard be installed on a bent skeg?
No. The original skeg must be straightened before installation. A bent skeg can prevent the guard from seating and aligning correctly.
Does this replace the entire skeg?
No. This is a protective replacement guard for the lower portion of a damaged skeg. It slides over and bolts through the remaining original skeg.
What tools are required?
Installation requires a drill and suitable drill bit, a wrench or socket set, and a rubber mallet. Follow the instructions supplied with the product.
Is drilling required?
Yes. Two holes must be drilled through the existing skeg to secure the guard with the included mounting bolts.
Does the stainless-steel construction help resist corrosion?
Yes. The 316 marine-grade stainless-steel construction is intended for marine use, and the drain hole helps reduce water retention inside the guard.
Is this an OEM component?
No. This is an aftermarket replacement and protective skeg guard. Compare the guard with your original skeg and verify fitment before installation.
What is the warranty?
The product is covered by a 3-year warranty against manufacturing defects under normal use. Contact support with your order details if a warranty issue occurs.
Safety & Important Information
- Verify the engine brand, model, year, horsepower, stroke, gearcase, and skeg profile before ordering.
- Do not install the guard on a bent, unstable, or severely deteriorated skeg.
- Use appropriate eye protection and follow safe drilling practices during installation.
- Professional installation is recommended when the original skeg requires straightening or substantial repair.
- This is an aftermarket replacement, not an OEM component.
About Sea Sierra
- Marine-Focused Parts — We supply replacement components designed for practical marine repair and maintenance.
- Global Fulfillment — Standard and expedited shipping options are shown at checkout where available.
- Customer Support — Contact our support team with your engine details if you need help reviewing the application.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
