Fuel Filter for Suzuki DF 9.9, DF 15 and DF 20 4-Stroke Outboards – Replaces 15410-87L00

Product Details

This aftermarket fuel filter is a replacement filter for selected Suzuki Marine DF 9.9, DF 15 and DF 20 four-stroke outboards. Suzuki parts catalogs list the corresponding fuel filter under OEM part number 15410-87L00 in the fuel-pump assemblies for the applications shown below.

The filter is intended to help remove contaminants from the fuel supply before fuel reaches the engine. Confirm the exact model designation, year and serial-number range against your engine identification plate and service documentation before ordering.

• Replacement fuel filter for selected Suzuki DF-series four-stroke outboards.
• Catalog reference: Suzuki OEM part number 15410-87L00.
• Supplied as one replacement fuel filter, not a multi-part service kit.
• Installation should be completed with the engine stopped and the fuel system handled safely.

Part Number Reference

Use the following verified manufacturer reference when comparing your existing filter or service-manual listing.

Engine & Model Compatibility

The catalog occurrences available for OEM part number 15410-87L00 identify the following Suzuki four-stroke applications. Model, year and serial-number conditions must be considered together; a horsepower match alone does not confirm fitment.

Important: The available catalog evidence confirms applications in the DF 9.9, DF 15 and DF 20 ranges. It does not establish fitment for Suzuki DF 25, DF 30, DF 70, DF 75, DF 80 or DF 90 models. Do not rely on the previous broad 9.9–90 HP description without confirming the correct OEM number and serial range.

Technical Specifications

Product Type

Replacement fuel filter

Installation Location

Fuel-pump or engine fuel-system assembly, depending on the outboard configuration

Fuel Type

Marine gasoline applications

Part Configuration

Single replacement filter

OEM Reference

Suzuki 15410-87L00

Application

Selected Suzuki DF 9.9, DF 15 and DF 20 four-stroke outboards listed in the compatibility table

What’s in the Box

• 1 × Replacement fuel filter

No additional seals, hoses, clamps or other service components are confirmed as included. Reuse or replace related hardware only as specified by the engine service manual.

Installation Notes

1. Stop the engine, allow it to cool and remove the ignition key. Follow the safety instructions in the engine service manual.
2. Ventilate the work area and keep the filter away from flames, sparks and other ignition sources.
3. Shut off or isolate the fuel supply as specified for your engine, and place an approved container or absorbent material beneath the filter.
4. Note the fuel-flow direction and the routing of the fuel lines before removing the existing filter.
5. Disconnect the fuel lines carefully and remove the old filter according to the engine-specific service procedure.
6. Install the replacement filter in the correct orientation and secure the fuel lines and retaining hardware.
7. Restore the fuel supply, prime the system if required and inspect all connections for leaks before starting the engine.
8. Run the engine only after confirming that there are no fuel leaks and that all components are correctly secured.

Troubleshooting & FAQ

Safety & Important Information

• Fuel is flammable. Work in a well-ventilated area away from heat, sparks and open flames.
• Verify the exact engine model, year, serial number and OEM part number before purchase.
• Do not install the filter if its connections, orientation or physical configuration do not match the original part and service documentation.
• Professional installation is recommended if you are not familiar with marine fuel-system service.

About Sea Sierra

Sea Sierra supplies replacement marine parts for maintenance and repair applications. For the best fitment result, compare the original component and consult the engine manufacturer's service information before installation.