Outboard Motor Transom Support Saver – Fits Single-Ram Tilt/Trim Systems (Replaces QuickMarine TS002)
Outboard Motor Transom Support Saver – Fits Single-Ram Tilt/Trim Systems (Replaces QuickMarine TS002) is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
Outboard Motor Transom Support Saver – Fits Single-Ram Tilt/Trim Sy...
Outboard Motor Transom Support Saver – Fits Single-Ram Tilt/Trim Systems (Replaces QuickMarine TS002) is backordered and will ship as soon as it is back in stock.
Product Details
This Outboard Motor Transom Support Saver is designed for outboard engines that use a single hydraulic tilt/trim ram. Installed between the tilt/trim ram and the boat's transom, it supports the engine during trailering and helps reduce unwanted engine movement and stress on the transom and tilt/trim assembly.
This product is an aftermarket replacement for the QuickMarine TS002 transom support saver. Confirm the single-ram configuration and compare the support shape with your original component before ordering.
- External support installed between the tilt/trim ram and the transom.
- Wedge-style design for single-ram power tilt/trim systems.
- Includes stabilizer clips to help prevent engine turning during transport.
- Suitable for marine use in saltwater and freshwater environments when properly maintained.
Part Number Information
Use the verified aftermarket reference below when comparing replacement parts.
| Brand or Reference | Part Number | Application |
|---|---|---|
| QuickMarine | TS002 | Aftermarket transom support saver for single-ram tilt/trim systems |
Engine & Model Compatibility
This support is intended for outboard engines equipped with a single hydraulic tilt/trim ram. The compatibility information below reflects the supplied application details; model, year, shaft configuration, and serial-number conditions are not specified.
| Brand | Model or Range | Rated HP | Stroke | Required Condition |
|---|---|---|---|---|
| Mercury | 4-Stroke outboards | 15–200 HP | 4-Stroke | Single hydraulic tilt/trim ram; includes specified Verado 6-cylinder applications |
| Mercury | OptiMax | 135–200 HP | 2-Stroke | Single-ram configuration |
| Yamaha | Outboards | 9–90 HP | Not specified | Single-ram configuration |
| Yamaha | F115LB | 115 HP | 4-Stroke | Single-ram configuration |
| Honda | Outboards | Not specified | Not specified | Single hydraulic tilt/trim ram |
| Suzuki | Outboards | Not specified | Not specified | Single hydraulic tilt/trim ram |
| Evinrude/Johnson | Outboards | Not specified | Not specified | Single hydraulic tilt/trim ram |
| Various | Kicker motors | Not specified | Not specified | Power tilt system with a single ram |
Do not use this support with three-ram systems or any engine whose tilt/trim geometry does not match the support. Always verify the engine's actual ram arrangement before purchase.
Technical Specifications
- Product Type
- Outboard motor transom support saver
- Installation
- External; fits between the tilt/trim ram and transom
- Connection
- Wedge design for single-ram tilt/trim systems
- Housing Material
- High-density EPDM rubber
- Housing Color
- Yellow
- Dimensions
- 5 × 2.1 × 2.1 in (127 × 53.3 × 53.3 mm)
- Weight
- 1.37 lb (0.62 kg)
- Fitting Type
- Wedge for single-ram tilt/trim systems
- Operating Characteristics
- High-temperature resistant rubber construction
- Environmental Use
- Corrosion-resistant and suitable for saltwater or freshwater applications
What's in the Box
- 1 × Yellow transom saver motor-toter support
- 2 × Orange outboard steering-stop stabilizer clips
Installation Notes
- Tilt the outboard motor to the fully raised position.
- Slide the transom saver wedge over the main tilt/trim ram shaft. Position the wider end toward the boat.
- Slowly lower the outboard until its weight rests firmly and squarely on the support wedge. Do not force the motor or apply excessive pressure.
- Attach the included steering-stop stabilizer clips to the hydraulic steering-cylinder rods on each side of the motor to help prevent side-to-side turning during transport.
- Before launching, trim the motor upward and remove the stabilizer clips and transom saver.
Troubleshooting & FAQ
Will this fit my specific outboard model?
This support is intended for outboard engines with a single hydraulic tilt/trim ram. Confirm the engine model and configuration using the compatibility information above, then visually verify that the engine has one ram and that the wedge geometry matches your original support. It is not intended for three-ram systems.
What is the purpose of the included stabilizer clips?
The orange clips attach to the hydraulic steering-cylinder rods to help prevent the engine from turning side to side while the boat is being trailered. They supplement the main transom support and should be removed before launching.
How should the support be used during trailering?
The support should be seated firmly on the single tilt/trim ram, with the motor's weight resting squarely on the wedge and no obvious gaps or looseness. Follow the engine and boat manufacturer's trailering instructions as well.
How do I know if the support is properly installed?
The wedge should remain firmly seated on the ram, and the motor should rest on it without excessive movement. If the support shifts, does not match the ram, or leaves a gap, do not trailer the boat until the fit is corrected.
How do I maintain the EPDM rubber support?
Rinse the support with fresh water after use in saltwater. Inspect it before each use for cracks, crumbling, deep cuts, or permanent deformation, and allow it to dry before storage.
What are signs that the support needs replacement?
Replace the support if it develops deep cracks, crumbling, severe compression, permanent deformation, or a loose fit on the tilt/trim ram. A damaged or distorted support may not provide reliable engine support.
Is this an OEM part?
No. This is an aftermarket replacement for the QuickMarine TS002 reference and is intended for compatible single-ram tilt/trim applications.
Safety & Important Information
- Verify the engine brand, model, year, horsepower, stroke, and actual tilt/trim configuration before ordering where applicable.
- Compare the support's shape and dimensions with the original part before installation.
- Use the support only with a compatible single-ram system; do not use it with three-ram systems.
- Remove the support and stabilizer clips before launching the boat.
- This is an aftermarket replacement, not an OEM component.
- Professional installation is recommended when the correct fit or installation condition is uncertain.
About Sea Sierra
- Marine Replacement Parts — We provide replacement components for a range of marine service and maintenance applications.
- Application-Focused Listings — Product descriptions are organized around component type, installation, and compatibility requirements.
- Fitment First — Always compare the listed configuration and physical dimensions with your original part before ordering.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
