Aftermarket Power Trim & Tilt Switch for Select Yamaha Outboards – Replaces 69J-82563-00-00 and 69J-82563-01-00
Aftermarket Power Trim & Tilt Switch for Select Yamaha Outboards – Replaces 69J-82563-00-00 and 69J-82563-01-00 is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
Aftermarket Power Trim & Tilt Switch for Select Yamaha Outboard...
Aftermarket Power Trim & Tilt Switch for Select Yamaha Outboards – Replaces 69J-82563-00-00 and 69J-82563-01-00 is backordered and will ship as soon as it is back in stock.
Product Details
This aftermarket Power Trim & Tilt Switch is designed for replacement applications that use the Yamaha trim and tilt switch assembly references 69J-82563-00-00 or 69J-82563-01-00. It provides control of the outboard's trim and tilt system when the original switch is worn, damaged, intermittent, or no longer responds.
Yamaha parts catalogs identify these references as TRIM & TILT SWITCH ASSY in multiple outboard electrical diagrams. Because the same reference numbers appear across different Yamaha model families, years, horsepower ratings, and diagram positions, confirm the exact OEM number, connector, mounting arrangement, and original switch appearance before ordering.
- Aftermarket replacement for selected Yamaha trim and tilt switch applications.
- Intended for direct replacement where the connector and mounting configuration match the original component.
- Suitable for restoring trim and tilt control after switch wear, corrosion, or electrical failure.
Part Number Matrix
The following are manufacturer part-number references associated with the cataloged trim and tilt switch assembly applications.
| Manufacturer | Part Number | Reference Type |
|---|---|---|
| Yamaha | 69J-82563-00-00 | Trim and tilt switch assembly reference |
| Yamaha | 69J-82563-01-00 | Trim and tilt switch assembly reference |
Engine & Model Compatibility
The examples below are catalog applications for the listed Yamaha OEM references. They are provided as identification leads rather than a universal fitment guarantee. Confirm the complete model designation, year, connector, and switch design before installation.
| OEM Reference | Example Yamaha Model | Horsepower | Stroke | Year |
|---|---|---|---|---|
| 69J-82563-00-00 | F200TXRA | 200 HP | 4-Stroke | 2002 |
| 69J-82563-00-00 | F225TURA / F225TXRA | 225 HP | 4-Stroke | 2002 |
| 69J-82563-00-00 | F150TLRC / F150TXRC | 150 HP | 4-Stroke | 2004 |
| 69J-82563-00-00 | F200TXRC / F225TURC / F225TXRC | 200–225 HP | 4-Stroke | 2004 |
| 69J-82563-01-00 | F150JB / F150LB / F150XB | 150 HP | 4-Stroke | 2015 |
| 69J-82563-01-00 | F175LA / F175XA | 175 HP | 4-Stroke | 2015 |
| 69J-82563-01-00 | F200LB / F200XB / F225XA | 200–225 HP | 4-Stroke | 2015 |
Important: The catalog also contains occurrences of these OEM references on other Yamaha model families, including some 2-Stroke and lower-horsepower applications. Do not rely on horsepower or year alone. Match the OEM number and physical configuration of the original switch.
Technical Specifications
- Product Type
- Power trim and tilt switch
- Product Construction
- Aftermarket replacement component
- Application
- Selected Yamaha outboard trim and tilt switch assembly applications
- Primary OEM References
- 69J-82563-00-00 and 69J-82563-01-00
- Function
- Controls the outboard trim and tilt system when installed on a matching application
What's in the Box
- 1 × aftermarket power trim and tilt switch
No additional wiring harness, control handle, mounting hardware, or other electrical components are included unless specifically shown or stated in the product listing.
Installation Notes
- Turn off the engine and disconnect the boat battery before beginning electrical work.
- Locate the original trim and tilt switch on the engine, remote control, or applicable control assembly.
- Compare the replacement switch with the original, including the connector, terminals, mounting points, actuator, and overall shape.
- Disconnect the original switch from the wiring harness without pulling on the wires.
- Remove the original mounting screws, clips, or retaining hardware as applicable.
- Install the replacement switch in the same orientation and secure it with the original hardware where suitable.
- Reconnect the wiring harness only after confirming that the connector and terminal arrangement match.
- Reconnect the battery and test trim-up and trim-down operation in a safe position.
- If the switch does not operate correctly, disconnect the battery and inspect the connector, wiring, fuse, relay, and trim motor circuit.
Troubleshooting & FAQ
How do I confirm that this switch fits my Yamaha outboard?
Compare the number on your original switch with 69J-82563-00-00 or 69J-82563-01-00, then verify the complete engine model, model year, connector, mounting arrangement, and product images. Catalog references alone should not be used to confirm fitment when the physical configuration differs.
What are common symptoms of a failed trim and tilt switch?
Symptoms can include intermittent operation, trim movement in only one direction, or no response when the switch is pressed. Corroded terminals, damaged wiring, or a faulty relay or trim motor can cause similar symptoms, so inspect the complete circuit before replacing the switch.
Is this an OEM Yamaha switch?
No. This listing is for an aftermarket replacement. The Yamaha numbers shown above are manufacturer reference numbers used to identify compatible applications; they are not a claim that the replacement is manufactured by Yamaha.
Does the switch include a wiring harness or control assembly?
No. The package includes one replacement switch only. A wiring harness, control handle, mounting hardware, or other components are not included unless explicitly shown in the listing.
Can I use the part number alone to confirm fitment?
Use the part number as the starting point, but also compare the connector and physical design. The same reference numbers appear in multiple Yamaha catalog applications, so the complete model and original-part match remain important.
Safety & Important Information
- Disconnect the battery before servicing the trim and tilt electrical circuit.
- Verify the OEM reference, engine model, year, connector, terminals, mounting points, and appearance before purchase.
- Do not force a connector or modify wiring to make an unmatched switch fit.
- This is an aftermarket replacement and is not an OEM Yamaha component.
- Professional installation is recommended if you are not familiar with marine electrical systems.
About Sea Sierra
- We provide aftermarket marine replacement parts for repair and maintenance applications.
- Our listings are organized around manufacturer references and application information to help with part identification.
- Always compare the replacement part with the original component before installation.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
