JMP 7426-01 Marine Flexible Impeller – 10-Blade, 12-Spline Drive, Replaces Jabsco 17937-0001
JMP 7426-01 Marine Flexible Impeller – 10-Blade, 12-Spline Drive, Replaces Jabsco 17937-0001 is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
JMP 7426-01 Marine Flexible Impeller – 10-Blade, 12-Spline Drive, R...
JMP 7426-01 Marine Flexible Impeller – 10-Blade, 12-Spline Drive, Replaces Jabsco 17937-0001 is backordered and will ship as soon as it is back in stock.
Product Details
The JMP 7426-01 marine flexible impeller is a replacement raw-water pump impeller for selected marine cooling-system applications. It is listed as a 10-blade impeller with a 12-spline drive and is cross-referenced to Jabsco 17937-0001.
Catalog references associate this impeller with selected JMP raw-water pump applications, including Detroit Diesel JPR-G6000F and JPR-G6010F pumps and the Volvo Penta JPR-VP0040DA pump used with sea-water pump number 3584062. Always compare the existing impeller dimensions, drive type, pump model and manufacturer part number before ordering.
- Flexible marine pump impeller for raw-water and sea-water cooling systems.
- 10-blade design with a 12-spline drive insert.
- Sold as a single replacement impeller; gaskets, O-rings, keys and other service parts are not included unless specifically shown with the selected product.
Part Number References
The following references are provided for identification and cross-reference purposes. They do not by themselves confirm fitment for every engine or pump configuration.
| Brand | Part Number | Reference |
|---|---|---|
| JMP | 7426-01 | Impeller part number |
| Jabsco | 17937-0001 | Cross-reference listed in the impeller guide |
| Detroit Diesel | 5193602 | Impeller reference for selected JPR-G6000F and JPR-G6010F pump parts lists |
| Volvo Penta | 3588475 | Impeller reference for the selected 3584062 sea-water pump parts list |
Selected Pump Compatibility
These catalog relationships are limited to the pump applications shown below. Engine model, pump version and serial-number conditions can vary, so verify the pump identification before installation.
| Manufacturer | Pump Model | Engine Model or Series | Pump Part Number | Impeller Reference |
|---|---|---|---|---|
| Detroit Diesel | JPR-G6000F | 353, 453, 471 | 5145578, 5145576 | 7426-01 |
| Detroit Diesel | JPR-G6010F | 271 | 5145577 | 7426-01 |
| Volvo Penta | JPR-VP0040DA | D4 | 3584062 | 7426-01 |
Technical Specifications
- Product Type
- Marine flexible impeller
- Impeller Diameter
- 65 mm
- Impeller Width
- 50 mm
- Shaft Diameter
- 15.8 mm
- Number of Blades
- 10
- Drive Type
- 12-spline drive
- Quantity
- 1 impeller
What's in the Box
- 1 x JMP 7426-01 flexible marine impeller
Not included: gasket, O-rings, key, cover, seal or other pump-service components unless separately listed with the order.
Installation Notes
- Shut down the engine and close the raw-water intake seacock.
- Locate the raw-water pump and remove the end cover according to the pump manufacturer's service instructions.
- Remove the old impeller without damaging the pump housing or shaft.
- Inspect the housing, end cover, shaft, drive interface and sealing surfaces for wear or damage.
- Clean debris from the pump chamber and confirm that the replacement impeller matches the original diameter, width and drive configuration.
- Lubricate the impeller with a suitable water-compatible lubricant recommended for the pump application. Do not run the impeller dry.
- Install the impeller in the correct orientation for the pump's direction of rotation and refit the end cover using the correct seal or gasket for that pump.
- Open the seacock, start the engine and check immediately for leaks, overheating and proper exhaust-water flow.
Troubleshooting & FAQ
How do I confirm that this impeller fits?
Match the existing impeller's part number, diameter, width, shaft diameter and drive type. Also verify the pump model and pump part number. A shared engine brand or horsepower rating alone is not sufficient to confirm fitment.
What are common signs of a worn impeller?
Possible signs include reduced cooling-water flow, higher-than-normal engine temperature, an overheating alarm or damaged and missing impeller blades. Inspect the pump and cooling system before installing a replacement.
Does this listing include a gasket or O-rings?
No. This listing is for one replacement impeller. Gaskets, O-rings, keys and other service parts are not included unless expressly listed for the product being ordered.
How often should a flexible impeller be replaced?
Inspect the impeller at the interval specified by the engine or pump manufacturer. Replacement timing depends on operating hours, storage conditions, dry running and exposure to abrasive or contaminated water.
Is this an OEM impeller?
This is a JMP aftermarket replacement impeller. Jabsco, Detroit Diesel and Volvo Penta numbers shown on this page are manufacturer reference numbers used for identification and cross-reference.
Safety & Important Information
- Close the seacock and allow the engine and pump to cool before servicing.
- Do not operate the pump dry; dry running can quickly damage the impeller and pump.
- Verify the pump model, part number and impeller dimensions before purchase and installation.
- Replace damaged seals, gaskets or O-rings as required for the specific pump application.
- Professional installation is recommended when pump or engine service procedures are unfamiliar.
About Sea Sierra
- Marine Parts Support — We provide replacement components for marine cooling and raw-water pump applications.
- Application-Focused Information — Product references and installation guidance are provided to help customers verify compatibility before ordering.
- Global Fulfillment — Shipping options and delivery estimates are shown at checkout where available.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
