Aftermarket Carburetor for Yamaha E T 60 HP 2-Stroke Outboards – Reference 6K5-14301-01/02/03

Product Details

This aftermarket carburetor is listed for Yamaha E T 60 HP series 2-stroke outboard applications and is associated with reference numbers 6K5-14301-01, 6K5-14301-02, and 6K5-14301-03. It is intended to replace a worn, damaged, or malfunctioning carburetor when the reference number and engine configuration match.

Before ordering, compare the number on your original carburetor and confirm the complete engine model and configuration. The available product record identifies this listing as a single carburetor rather than a multi-piece kit.

• Aftermarket replacement carburetor
• Listed for Yamaha E T 60 HP 2-stroke outboard applications
• Reference numbers: 6K5-14301-01, 6K5-14301-02, and 6K5-14301-03
• Single replacement carburetor

Part Number Matrix

Use the following references when comparing your existing carburetor. These numbers are provided for identification and ordering reference; verify the part and engine application before installation.

Engine & Model Compatibility

The available product information associates this carburetor with the following Yamaha application. Confirm the exact model, year, serial range, and original carburetor reference before purchase because 60 HP outboards may vary by configuration.

Technical Specs

Part Type

Carburetor

Product Type

Single aftermarket replacement carburetor

Listed Compatibility

Yamaha E T 60 HP 2-stroke outboard applications

Reference Numbers

6K5-14301-01, 6K5-14301-02, 6K5-14301-03

Engine Type

2-stroke outboard

Horsepower

60 HP

What's in the Box

• 1 × Carburetor

Installation Notes

1. Disconnect the battery, shut off the fuel supply, and allow the engine to cool before beginning work.
2. Remove the air intake or silencer components as necessary to access the carburetor.
3. Disconnect the fuel line, throttle linkage, choke linkage, and any other connected components, noting their original positions.
4. Remove the mounting hardware and carefully take off the existing carburetor.
5. Inspect the mounting surface, gasket, fuel line, linkages, and nearby components for damage or contamination.
6. Install the replacement carburetor with the correct gasket and mounting hardware. Do not reuse damaged gaskets.
7. Reconnect the fuel line and all linkages in their original positions.
8. Reinstall the air intake components and check that the throttle and choke operate freely.
9. Prime the fuel system and inspect all connections for leaks before starting the engine.
10. After starting, verify idle and throttle operation and make any adjustments required by the applicable factory service information.

Troubleshooting & FAQ

How do I know if my carburetor needs replacement?

Possible signs of a carburetor problem include hard starting, rough idle, poor acceleration, fuel leakage, excessive fuel consumption, or abnormal exhaust smoke. Inspect and clean the fuel system first where appropriate. Replace the carburetor if cleaning or service does not restore proper operation or if the body or internal components are damaged.

Will this fit my specific Yamaha 60 HP model?

This listing is associated with Yamaha E T 60 HP 2-stroke outboard applications and reference numbers 6K5-14301-01, 6K5-14301-02, and 6K5-14301-03. Exact fitment is not confirmed by horsepower alone. Compare your original part number and verify the complete engine model, year, and serial information before ordering.

Does this listing include a complete carburetor kit?

No. The product record identifies this item as a single replacement carburetor. Additional gaskets, linkages, hoses, or other installation parts should not be assumed to be included unless specifically shown or stated in the package contents.

Do I need to adjust the carburetor after installation?

Adjustment or synchronization may be required after installation. Follow the applicable Yamaha service information for idle speed, mixture, linkage, and synchronization procedures. Do not rely on a generic adjustment setting if the engine specifications differ.

Can I install this carburetor myself?

Installation should be performed only by someone familiar with marine engine fuel systems and carburetor adjustment. If you are unsure about fuel-line connections, linkage synchronization, leak checks, or tuning, use a qualified marine technician.

What is the difference between the -01, -02, and -03 references?

These are separate reference-number suffixes associated with the listed application. The available product information groups them with this replacement, but it does not provide a detailed explanation of the design or production differences between the suffixes. Verify the number on your original component before ordering.

How often should a carburetor be replaced?

There is no universal replacement interval. Service or replace the carburetor when cleaning and adjustment no longer restore proper function, or when corrosion, cracking, leakage, or excessive internal wear is present.

Is this an OEM carburetor?

No. This listing is for an aftermarket replacement carburetor. Yamaha reference numbers are provided for application and identification purposes.

Safety & Important Info

• Verify the reference number, engine model, year, serial information, and physical configuration against your original part before ordering.
• Do not assume that every Yamaha 60 HP outboard uses the same carburetor.
• Inspect the fuel system for leaks after installation and before operating the engine.
• This is an aftermarket replacement, not an OEM component.
• Professional installation is recommended when correct fuel-system adjustment or synchronization cannot be confirmed.

About Sea Sierra

• We supply replacement marine parts for repair and maintenance applications.
• Product references are provided to help customers compare parts and confirm application details.
• For best results, verify the original part number and complete engine information before ordering.