Acouto 35HP Marine Engine Parts

(0 products)

This page is for Honda 4‑Stroke 35 HP outboard engines. Use it to find compatible parts and practical service information. Below you’ll find maintenance tips, common replacement parts, and troubleshooting guidance. You can also browse the main Honda collection for a wider selection. Scroll to the bottom of the page to start browsing parts for this engine. On the collection pages, use the “Filter & Sort” controls to narrow results by horsepower, year range, and part category.

Browse All Honda Parts

How to Identify Your 35 HP Model

Locate the serial/model plate on the starboard transom bracket or swivel bracket. It lists the model code and serial number.
Model code format: for example “BF35A” followed by suffix letters indicating shaft length (S/L/X), control type (tiller/remote), and revision year.
Platform notes: Honda 35 HP models are 4‑stroke inline engines; many components are shared with adjacent families (e.g., some BF30/BF40 era parts), but always verify by serial.
Check the cowling decals and intake arrangement to distinguish carbureted generations; confirm details against the model code before ordering parts.

Engine Overview

Honda BF35 (Inline‑3 4‑Stroke)

Feature	Description
Configuration	Inline‑3, carbureted 4‑stroke outboard; typical thermostat setpoint ~72°C for proper warm‑up and cooling control.
Common Models	Examples include BF35A variants with suffixes for shaft length and control type (e.g., BF35AX, BF35AM).
Advantages	Quiet operation, solid fuel economy for the class, and broad parts availability shared across related Honda BF families.
Notes	Cooling‑system items (impeller, housing, thermostat) and routine service parts are wear items. Always match parts to your exact model code and serial range.

Routine Maintenance & Service Parts

Intervals below are general guidelines for typical recreational use. Always follow the official Honda service manual for your exact model and operating conditions.

Item	Interval*	Remarks	Parts Link
Engine oil + filter	First 20 hrs, then every 100 hrs or annually	Use NMMA FC‑W oil; replace the filter at each oil change.	Oil Filters
Gear oil (lower unit)	Every 100 hrs or annually	Inspect for water intrusion (milky oil) and metal debris.	Service & Maintenance Kits
Spark plugs	Inspect 100 hrs; replace 200 hrs or as needed	Set correct gap and use marine‑rated plugs.	Spark Plugs
Fuel filter / water separator	Every 100 hrs or annually	Replace sooner if stale fuel or contamination is suspected.	Fuel Filters
Water pump impeller/kit	Every 2–3 seasons or 200 hrs	Critical for cooling; replace sooner if weak tell‑tale or overheating.	Honda Water Pump Repair Kits
Anodes (zincs)	Inspect every 50 hrs; replace when 50% depleted	Use alloy appropriate for fresh, brackish, or saltwater.	Anodes
Thermostat	Inspect 2 years; replace as needed	Stuck thermostats cause cold‑running or overheating; verify temperature spec for your model.	Honda Outboard Parts

Frequently Used Parts Categories

Routine Service: Service & Maintenance Kits
Cooling System: Honda Water Pump Repair Kits
Gearcase & Seals: Honda Lower Unit Seal Kits
Fuel System: Fuel Filters and Carburetor
Ignition / Electrical: Electrical Items and Spark Plugs
Propulsion: Propellers
Corrosion Protection: Anodes

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak tell‑tale or overheat alarm	Inspect intake screens for blockage, verify impeller condition, and test thermostat operation.	Water pump repair kit, thermostat, intake screen, anodes
Hard starting / rough idle	Check for stale fuel, fouled plugs, and clogged idle jets or filters; confirm choke/enricher function.	Spark plugs, fuel filter, carburetor parts
Poor acceleration / power loss	Inspect propeller for damage or wrong pitch; check compression and fuel delivery; verify timing/valve clearance as applicable.	Propeller, fuel filters, spark plugs
Gearcase noise or metal in gear oil	Confirm oil level and condition; pressure test for leaking seals; inspect for fishing line on prop shaft.	Lower unit seal kit, gear oil, prop shaft hardware

FAQs

Are parts interchangeable between BF30, BF35, and BF40 models?

Many routine service parts and some cooling‑system components overlap across these families, but not all. Always confirm using your exact model code and serial number before purchasing.

When should the impeller be replaced?

As a rule of thumb, replace the water pump impeller every 2–3 seasons (about 200 hours) or sooner if flow is weak, the engine overheats, or you frequently operate in sandy/silty water.

How often should I change lower unit gear oil?

Change gear oil every 100 hours or annually. Inspect for milkiness (water intrusion) or metallic sheen, which indicates a seal issue or gear wear and warrants further diagnosis.

What information do you need to confirm part compatibility?

Please provide the full model code (e.g., BF35A), serial number, shaft length, control type (tiller/remote), and photos of the nameplate and the part you need. This ensures we match the correct parts for your engine.

Ready to find parts by horsepower, year, and model? Browse the main Honda outboard collection and refine using Filter & Sort.

Shop Honda Outboard Parts

If you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.