Evinrude Outboard 2-Stroke 40-75HP Marine Engine Parts

(5 products)

This page focuses on Evinrude 2‑Stroke 40–75HP outboard engines and helps you find compatible parts and key service information. Below youll find maintenance tips, common replacement parts, and troubleshooting guidance. You can also browse the main Evinrude/Johnson/OMC collection any time. Scroll to the bottom of this page to begin browsing parts specific to this engine range, and on the collection page use the Filter & Sort controls to narrow results by horsepower, year range, and part category.

Browse All Evinrude Parts

How to Identify Your 40375HP Model

Nameplate location: look on the transom clamp bracket or swivel bracket. The model and serial labels are typically on the starboard side.
Reading the model code: suffix letters often indicate shaft length (S/L/X), control type (tiller/remote), and other options. The code helps confirm parts compatibility.
Platform differences: 23troke carbureted models (common on older 40/48/50 and many 60/70/75) differ from later E3TEC direct3injected 23trokes. Many hardware items interchange, but ignition/fuel components do not.
Cylinder count cues: 4050 HP models are typically twin3cylinder; 6075 HP models are commonly triple3cylinder. Verify by model number to ensure the right parts.

Platform Overview

Carbureted 23troke (4075 HP)

Feature	Description
Configuration	Twin3cylinder (common for 40/48/50 HP) and triple3cylinder (common for 60/70/75 HP) carbureted 23trokes.
Common Models	4050HP 23troke models; many 1980s00s variants with remote or tiller options and multiple shaft lengths.
Advantages	Light weight, simple to service, strong lowmid range for small to midsize boats.
Notes	Water pump kits and many gearcase items are widely used across years; ignition and carb jetting vary by model/yearalways verify with the full model code.

E3TEC 23troke (4075 HP)

Feature	Description
Configuration	Direct3injected 23trokes with electronically managed fuel/oil; twin and triplecylinder variants within this HP band.
Common Models	E3TEC 40/50/60; E3TEC 75. Model year and submodel determine injector, ECU, and electrical parts.
Advantages	Improved fuel economy and emissions vs. carb versions; very clean running when maintained.
Notes	Use the exact model/serial for DI components (injectors, ECU, sensors). Cooling and gearcase service is similar to carbureted models.

Routine Maintenance & Service Parts

Intervals below are general guidelines; always follow the official Evinrude service manual for your exact model and usage.

Item	Interval*	Remarks	Parts Link
Gear oil (lower unit)	Every 100 hours or annually	Inspect for water/metal; replace seals if contamination is found.	Lower Unit Seal Kits \| Evinrude/Johnson/OMC Parts
Spark plugs	100 hours or annually	Use the correct heat range and gap; fouling indicates mixture or oiling issues.	Spark Plugs
Fuel filter / water separator	100 hours or annually (inspect more often in harsh conditions)	Replace if fuel is stale or contaminated; helps prevent injector/carb issues.	Fuel Filters
Water pump impeller / kit	Every 2 seasons (or sooner if weak telltale/overheat)	Critical for cooling; sand/silt use may require annual replacement.	Water Pump Repair Kits
Anodes (zincs)	Inspect every trip; replace when 50% depleted	Use correct material for your water (zinc/aluminum/magnesium).	Evinrude/Johnson/OMC Anodes
Oil injection system check (23troke)	100 hours or annually	Verify pump operation, renew brittle oil lines, and confirm no air leaks.	Hoses \| Evinrude/Johnson/OMC Parts
Battery/charging system (E3TEC & carb)	100 hours or annually	Loadtest battery; check rectifier/regulator output and connections.	Electrical Items \| Rectifiers \| Starters

Frequently Used Parts Categories

Routine Service Johnson/Evinrude/OMC Service & Maintenance Kits
Cooling System Water Pump Repair Kits
Gearcase & Seals Lower Unit Seal Kits
Ignition / Electrical Electrical Items
Fuel System Fuel Filters | Fuel Pumps
Propellers & Hardware Evinrude/Johnson/OMC Propellers
Corrosion Protection Evinrude/Johnson/OMC Anodes

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak telltale / overheat alarm	Inspect intake screen for blockage; verify impeller condition; confirm thermostat operation.	Water pump repair kit, impeller, thermostat gasket, intake screen
Poor acceleration / power loss	Check fuel quality, replace fuel filter, inspect plugs and compression; on carb models verify jet cleanliness; on E3TEC confirm battery health and connections.	Fuel filter, spark plugs, carburetor service parts, battery/charging components
Hard starting / rough idle	Prime bulb and look for air leaks; verify spark; inspect idle mixture/cold start enrichment; DI models may need sensor/battery checks.	Spark plugs, fuel lines/hoses, electrical connectors, sensors
Excessive smoke (23troke)	Confirm correct oil type and delivery; check for stuck choke or rich carb settings; verify oil pump/line integrity.	Hoses, carburetor components, oil system service items
Gearcase noise / metal in gear oil	Drain and inspect gear oil; pressure/vacuum test seals; confirm prop shaft is straight and free of fishing line.	Lower unit seal kit, bearings, prop hardware

FAQs

Are parts interchangeable between different years or between carbureted and E3TEC models?

Some hardware (water pump kits, many gearcase pieces) overlaps across years, but ignition, fuel, and electronics differ significantly by platform and model year. Always confirm using the full model and serial numbers.

When should I replace the water pump impeller?

As a rule of thumb, replace the impeller every two seasons, or sooner if you notice a weak telltale, any overheat alert, or if the engine is used in sandy or silty water.

How often should I change lower unit gear oil?

At least once per season or every 100 hours. Also change it after any suspected impact, submersion, or if the oil appears milky or metallic.

What information do you need to confirm part compatibility?

Please provide the full model code, serial number, horsepower, approximate year, shaft length, and control type (tiller or remote). A clear photo of the nameplate helps ensure a precise match.

Ready to find the right parts? Browse the main Evinrude/Johnson/OMC collection and use the filters to narrow by horsepower, year, and model.

Shop Evinrude Parts

If youre unsure about your model, send us a photo of the nameplate and the part you need and well help verify compatibility.