Honda Marine 55-60HP 4-Stroke Outboard Engine Parts

(1 products)

This page supports Honda Marine 55–60HP 4‑Stroke outboard engines. Use it to find compatible parts and service information, including maintenance tips, common replacement items, and troubleshooting guidance. You can also browse the main Honda collection. Scroll to the bottom of this page to start browsing parts for this engine, and remember you can use the “Filter & Sort” controls on the collection page to narrow results by horsepower, year range, and part category.

Browse All Honda Parts

How to Identify Your 55–60HP Model

Locate the engine nameplate/serial plate on the mounting bracket or swivel bracket; it lists the model code and serial number.
Read the full model code and suffix. For 60HP, examples include BF60 and BFP60 (Power Thrust). The suffix typically indicates shaft length and control type (tiller vs. remote).
Confirm platform differences: BFP60 models feature a larger gearcase/propeller for added thrust; some propeller and gearcase parts differ from BF60.
Record shaft length, serial number, and any rigging details. Photos of the nameplate and the part area help verify compatibility.

Platform Overview

Honda BF60 / BFP60 (4‑Stroke)

Feature	Description
Configuration	EFI 4‑stroke inline‑3 with electronic ignition and freshwater flush provision.
Common Models	BF60 (standard) and BFP60 Power Thrust variant. Suffixes denote shaft length and control type.
Advantages	Quiet operation, strong mid‑range torque, efficient fuel economy, reliable cold starts via EFI.
Notes	BFP60 uses a larger gearcase/propeller for improved thrust; match cooling, gearcase, and prop parts to your exact model code and suffix.

Routine Maintenance & Service Parts

Intervals below are general guidelines for typical recreational use. Always follow procedures and schedules in your official Honda service manual for your specific model code.

Item	Interval*	Remarks	Parts Link
Engine oil & filter	Every 100 hours or annually	Warm engine before draining; replace crush washer as needed and verify correct oil grade.	Oil Filters
Gear oil (lower unit)	Every 100 hours or annually	Inspect for water intrusion or metal fines; replace drain/fill plug gaskets and seals if contamination is found.	Honda Lower Unit Seal Kits
Spark plugs	Inspect 100 hrs; replace ~200 hrs (or as needed)	Check gap and insulator; replace if fouled, worn, or out of spec.	Spark Plug
Fuel filter / water separator	Every 100 hours or annually	Service more often with ethanol fuel or contamination risk; drain or replace if water is present.	Fuel Filters
Water pump impeller/kit	Every 200 hours or 2 years	Replace sooner if weak tell‑tale, overheating, or after sand/debris ingestion.	Honda Water Pump Repair Kits
Anodes (internal & external)	Inspect every 100 hours; replace at ~50% depletion	Match anode material (aluminum/magnesium/zinc) to your water type for optimal protection.	Anodes

*Typical recommendations; always defer to the official maintenance schedule for your exact model code and usage.

Frequently Used Parts Categories

Routine Service: Service & Maintenance Kits
Cooling System: Honda Water Pump Repair Kits
Gearcase & Sealing: Honda Lower Unit Seal Kits
Fuel System: Fuel Filters
Ignition & Electrical: Spark Plug
Corrosion Protection: Anodes
Propulsion: Propellers

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak tell‑tale or overheat alarm	Inspect intake screens for debris; verify impeller and thermostat operation; confirm proper water level.	Water pump kit, thermostat, intake screen
Hard starting or rough idle	Check battery voltage and connections; examine spark plugs; drain/replace stale or contaminated fuel; service filters.	Spark plugs, fuel filter, primer bulb/lines
Poor acceleration or power loss	Verify prop condition and pitch; check for hull fouling; inspect fuel tank venting and supply.	Propeller, fuel filter, anodes (if heavily eroded)
Gearcase noise or milky gear oil	Drain and inspect gear oil; replace drain/fill plug gaskets; check prop‑shaft seal for fishing line damage.	Lower unit seal kit, drain/fill plug gaskets

FAQs

Are parts interchangeable between BF60 and BFP60 or different years?

Many components are shared, but the Power Thrust (BFP60) uses a different gearcase/prop setup. Always confirm against your full model code and suffix, as year and shaft length can change specific part numbers.

When should the water pump impeller be replaced?

A common guideline is about every 200 hours or every 2 years. Replace sooner if the tell‑tale weakens, you ingest debris, or you experience an overheat warning.

How often should I change the lower unit gear oil?

Typically every 100 hours or annually. If you see water intrusion (milky oil) or metal fines, address seal issues and refresh the oil immediately.

What information helps confirm part compatibility?

Provide the full model code (e.g., BF60 or BFP60) with suffix, serial number, shaft length, and control type (tiller or remote). Clear photos of the nameplate and the part area are also helpful.

Ready to find parts for your Honda Marine 55–60HP 4‑Stroke? Browse our main Honda collection and use Filter & Sort to narrow by horsepower, year, and part type.

Shop Honda Outboard Parts

If you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.