Johnson 2-Stroke 2.2HP Outboard Marine Engine Parts

(1 products)

This page supports Johnson 2-Stroke 2.2HP outboard engines. Use it to find compatible parts and key service information. Below you’ll find maintenance tips, common replacement parts, and troubleshooting guidance. You can also browse the main Johnson/Evinrude collection. Scroll to the bottom of this page to start browsing parts for this engine, and on the collection page use the Filter & Sort controls to narrow results by horsepower, year range, and part category/section.

Browse All Johnson Parts

How to Identify Your 2.2HP Model

Locate the serial/model plate on the transom clamp bracket or the swivel bracket; some small models also have a stamped core plug (welch plug) on the powerhead.
Read the full model code. On Johnson/Evinrude models, the letters and numbers indicate horsepower, shaft length, starting method, and production year; suffix letters often encode the year. Always confirm against the plate.
Verify platform details: 2-Stroke, single-cylinder, manual (recoil) start, tiller steer. Many small portables use an integral fuel tank with an option for a remote tank.
Match gearcase style and shaft length (Short/Long) when selecting seals, impellers, and propellers.

Engine Overview

Johnson 2–2.3 HP Portable 2‑Stroke

Feature	Description
Configuration	Single-cylinder, carbureted 2‑Stroke; manual recoil start; tiller handle; integral small fuel tank with optional remote tank on some variants.
Common Models	Johnson 2–2.3 HP 2‑Stroke portable models (confirm exact model and serial for parts fit).
Advantages	Ultra‑lightweight, simple maintenance, reliable slow‑speed trolling, easy to service in the field.
Notes	Many wear items interchange with Evinrude equivalents. Use the serial/model plate to verify impeller, seal kit, and prop compatibility. Follow the specified fuel/oil mix ratio for your exact model.

Routine Maintenance & Service Parts

Intervals below are general guidelines for small 2‑Stroke outboards. Always follow the official service manual for your exact model.

Item	Interval*	Remarks	Parts Link
Gear oil (lower unit)	Every season or 100 hrs	Replace after water intrusion or submersion. Inspect for metal shavings.	Johnson/Evinrude Lower Unit Seal Kits
Spark plug(s)	Seasonally (or 100 hrs)	Gap to spec; replace if fouled. Keep a spare on board.	Spark Plugs
Fuel filter (inline)	Inspect 50 hrs; replace annually	Use fresh fuel; replace at first sign of restriction.	Fuel Filters
Water pump impeller / kit	Every 2 seasons (sooner in sandy/silty water)	Restore strong tell‑tale stream and cooling performance.	Johnson/Evinrude Water Pump Repair Kits
Anodes (corrosion protection)	Inspect every 3 months; replace when 50% depleted	Essential for salt/brackish water use.	Johnson/Evinrude Anodes
2‑Stroke oil & fuel mix	Each refuel	Use fresh gasoline and the model‑specified mix ratio (commonly 50:1 unless otherwise stated by your manual).	Johnson/Evinrude Service & Maintenance Kits
Propeller & shear pin	Inspect regularly; after any strike	Carry a spare pin/cotter; check for bent blades or chips.	Johnson/Evinrude Propellers
Gaskets & sealing surfaces	As needed during service	Replace carb base, exhaust plate, and gearcase seals if disturbed.	Johnson/Evinrude Gaskets

Frequently Used Parts Categories

Cooling System: Water Pump Repair Kits
Fuel System: Fuel Filters • Carburetor
Ignition / Electrical: Ignition Switch • Spark Plugs
Propulsion: Johnson/Evinrude Propellers
Seals & Gaskets: Lower Unit Seal Kits • Gaskets
Corrosion Protection: Anodes
Routine Service: Service & Maintenance Kits

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak tell‑tale stream or overheat	Inspect intake screen for debris; verify strong impeller output; confirm thermostat operation.	Water pump kit, impeller, thermostat, intake screen
Hard starting / rough idle	Use fresh fuel; check choke/enrichment; inspect spark plug and plug cap; look for air leaks at fuel lines.	Carburetor repair kit, spark plug, fuel filter, fuel line
Poor acceleration / power loss	Check prop for damage; confirm tank vent open; clean carb jets; verify ignition spark strength.	Propeller, carb kit, fuel filter, spark plug
Excessive smoke (2‑Stroke)	Confirm correct oil ratio; avoid prolonged cold idling; verify plug heat range and condition.	Spark plug, approved 2‑Stroke oil
Gearcase noise / milky oil	Look for fishing line on prop shaft; pressure test seals; drain oil and inspect.	Lower unit seal kit, prop shaft seals, gear lube

FAQs

Are parts interchangeable across Johnson and Evinrude 2–2.3 HP models?

Many small OMC components are shared, but there are year‑to‑year and gearcase differences. Confirm with your full model number and serial before ordering.

When should I replace the water pump impeller?

As preventive maintenance, every two seasons, or sooner if operating in sandy/silty water or if the tell‑tale stream weakens, the engine overheats, or rubber vanes show set or cracking.

How often should I change the lower unit gear oil?

At least once per season or every 100 hours. Also change it immediately after any ground strike, fishing line ingestion, or submersion to check for water intrusion.

What information helps confirm part compatibility?

Provide the model and serial number, horsepower, shaft length, approximate year, and a photo of the nameplate and the part being replaced. This ensures an accurate match.

Ready to find parts? Browse the main Johnson/Evinrude collection and use Filter & Sort to narrow by horsepower, year, and category.

Shop Johnson/Evinrude Parts

If you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.