QuickMarine 80HP 4-Stroke Outboard Engine Parts

(1 products)

This page focuses on QuickMarine 80HP 4‑Stroke outboard engines and helps you find compatible parts and practical service information. Below you’ll find maintenance intervals, common replacement parts, and troubleshooting guidance specific to this horsepower class. You can also browse our outboard brand collections, and at the bottom of the page you’ll find quick links to start browsing parts for this engine. On collection pages, use the Filter & Sort controls to narrow results by horsepower, year range, and part category.

Shop Service & Maintenance Kits

Popular brand collections you can explore for cross-referencing and compatible components: Yamaha Outboard Parts, Mercury Outboard Parts, Honda Outboard Parts, Suzuki Outboard Parts, Tohatsu Outboard Parts, Johnson/Evinrude Outboard Parts.

How to Identify Your 80HP Model

Locate the nameplate/serial tag on the transom bracket or swivel bracket; some models also include a secondary decal under the cowling.
Model code and suffix: the letters often indicate shaft length (S/L/XL), starting/steering options, and sometimes a market/year code. Record the full code and any serial prefix.
4‑Stroke specifics: note EFI vs. carbureted, presence of an O2 sensor, and alternator output. These details help confirm the correct filters, anodes, and electrical parts.
Family grouping: many 80HP 4‑strokes share a platform with 75/90 models. Verify by displacement and model code to ensure parts compatibility.

Platform Overview

80HP 4‑Stroke Inline‑4 EFI (Common in this class)

Feature	Description
Configuration	Inline‑4, SOHC/DOHC 4‑stroke with EFI; shared block architecture with many 75/90HP variants.
Common Models	Typical “80HP 4‑stroke” outboards across major brands; often part of a 75/80/90 family. Confirm with model/serial for exact parts.
Advantages	Good fuel economy, quiet operation, broad mid‑range torque, and commonality of service parts with sibling horsepower models.
Notes	Impeller, gearcase seals, anodes, and filters are routine service items. Prop pitch selection and gear ratio vary by model; match to boat load and RPM spec.

Routine Maintenance & Service Parts

Intervals below are general guidelines for 4‑stroke 80HP outboards. Always follow the official service manual for your exact model and operating environment.

Item	Interval*	Remarks	Parts Link
Engine oil & filter	Every 100 hours or annually	Warm engine before draining; replace crush washer if applicable.	Oil Filters
Gear oil (lower unit)	Every 100 hours or annually	Change before winter storage; inspect for metal or water intrusion.	Lower Unit Seal Kits
Spark plugs	Inspect 100 hours; replace 200–300 hours	Gap to spec; replace sooner for misfire or fouling.	Spark Plugs
Fuel filter / water‑separating filter	Every 100 hours or annually	Replace more often if using ethanol blends or in high‑debris fuel systems.	Fuel Filters
Water pump impeller / kit	Every 2–3 seasons or 200 hours	Replace sooner for weak telltale, overheat alarms, or sandy/silty use.	Water Pump Impeller Rebuild Kits
Anodes (sacrificial)	Inspect every 50 hours; replace when 50% depleted	Match alloy to water type (salt/brackish/fresh) and keep bonding clean.	Anodes

*Intervals may vary by model year and operating conditions.

Frequently Used Parts Categories

Routine Service – Service & Maintenance Kits
Cooling System – Water Pump Impeller Rebuild Kits
Fuel System – Fuel Filters
Ignition / Electrical – Electrical Items
Corrosion Protection – Anodes
Propulsion – Propellers and Propeller Guards
Lower Unit / Driveline – Lower Unit Seal Kits

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak telltale or overheat alarm	Inspect telltale outlet for blockage; verify impeller age; check thermostat and intake screens.	Water pump impeller kit, thermostat, intake screen, gaskets
Hard starting / rough idle	Fuel freshness, battery voltage, spark plug condition, idle air control and vacuum leaks.	Spark plugs, fuel filter, fuel pump, hoses/clamps
Poor acceleration / power loss	Prop condition/pitch, restricted fuel flow, dirty injector(s), and engine reaching WOT RPM spec.	Propeller, fuel filters, fuel pump, spark plugs
Gearcase noise or metallic paste in oil	Verify gear oil level/color; look for water intrusion and seal damage.	Lower unit seal kit, bearings, shims, drain/fill gaskets

FAQs

Are parts interchangeable between different years or platforms?

Sometimes. Many 80HP 4‑stroke models share components with 75/90 families, but details like gear ratio, ignition, and anodes can change by year or market. Always confirm using the complete model code and serial information.

When should I replace the water pump impeller?

As a rule of thumb, every 2–3 seasons or about 200 hours. Replace sooner if you boat in sandy/silty water, see a weak telltale, or experience overheat alarms.

How often should I change the gear oil?

At least every 100 hours or annually, and always before winter storage. If the drained oil looks milky or metallic, service seals and inspect gears/bearings.

What information do you need to confirm part compatibility?

Provide the full model code, serial number, shaft length, and any options (tiller/remote, charging output). A clear photo of the nameplate and the part to replace also helps ensure a precise match.

Ready to maintain your QuickMarine 80HP 4‑Stroke outboard? Browse our main collections by part type and refine by horsepower, year, and model using the Filter & Sort controls.

Start with Service & Maintenance Kits

If you’re unsure about your model, send us a clear photo of the nameplate and the part you need and we’ll help verify compatibility.