Suzuki 4-Stroke Outboard Engines 115-350HP Parts
(1 products)This page is dedicated to Suzuki 4-Stroke 115–350HP outboard engines. Use it to find compatible parts and service information, including maintenance tips, commonly replaced items, and troubleshooting guidance. You can also browse the main Suzuki outboard parts collection, and at the bottom of this page you’ll find a quick way to start browsing parts for this engine range. On the collection page, use the Filter & Sort controls to narrow results by horsepower, year range, and part category/section.
Browse All Suzuki PartsHow to Identify Your 115–350HP Model
- Nameplate location: Check the identification/serial plate on the transom bracket or swivel bracket. The stamped label on the clamp bracket also lists model and serial.
- Reading Suzuki model codes: For 4-stroke models, look for codes such as DF115, DF140, DF150, DF175, DF200, DF225, DF250, DF300, DF350 with suffixes indicating features. Shaft length is often S (15"), L (20"), X (25"), or XX (30").
- Control and rotation suffixes: Letters like R (remote), T (trim/tilt), and Z or G (counter-rotation) may appear after the length. These affect propellers, gearcase parts, and anodes.
- Year/version hints: Later letters or revision tags (e.g., “A”, “AP”) indicate updated platforms with different ECU mapping or hardware; verify by serial number when selecting service parts.
Platform Overview
Inline-4 EFI 4-Stroke (Typical: DF115/DF140, DF150/DF175, DF200A)
| Feature | Description |
|---|---|
| Configuration | Inline-4 DOHC electronic fuel injection 4-stroke; models generally from 115HP up to 200HP (select variants). |
| Common Models | Examples include DF115/DF115A, DF140/DF140A, DF150, DF175, DF200A (various shaft lengths and control options). |
| Advantages | Good fuel economy, broad torque band, lighter weight vs V6, straightforward service access. |
| Notes | Certain components (filters, anodes, water pump kits) may be shared across families; confirm by model suffix and serial for exact fit. |
V6 EFI 4-Stroke (Typical: DF200/DF225/DF250/DF300/DF350)
| Feature | Description |
|---|---|
| Configuration | V6 DOHC electronic fuel injection 4-stroke platforms from 200HP through 350HP; some high-output models use advanced gearcases. |
| Common Models | Examples include DF200, DF225, DF250, DF300, DF350 (various shaft lengths, counter-rotation options). |
| Advantages | High output, strong mid- and top-range power for heavier boats; robust charging systems. |
| Notes | Counter-rotating and long/extra-long variants use different props and some gearcase components. Always match impeller/anode kits to the exact model code. |
Routine Maintenance & Service Parts
Intervals below are typical guidelines for 4-stroke outboards. Always follow your engine’s official service manual and operating conditions.
| Item | Interval* | Remarks | Parts Link |
|---|---|---|---|
| Engine oil & filter | First 20 hours, then every 100 hours or annually | Use marine 4-stroke oil meeting manufacturer specs; replace oil filter with each oil change. | Suzuki Service & Maintenance Kits |
| Gear oil (lower unit) | Every 100 hours or annually | Inspect for water or metal; replace drain/fill gaskets as needed. | Service & Maintenance Kits |
| Spark plugs | Inspect every 100 hours; replace 200–300 hours or as needed | Check gap and condition; fouling indicates mixture or ignition issues. | Suzuki Spark Plug |
| Fuel filter / water-separating filter | Inspect every 50 hours; replace 100 hours or seasonally | Drain water separators regularly; contaminated fuel can cause power loss. | Suzuki Fuel Filters |
| Water pump impeller/kit | Every 2–3 seasons (or 200–300 hours) | Shorter intervals for sandy/silty water or high-hours use. | Suzuki Water Pump Repair Kits |
| Anodes (zincs) | Inspect every 50 hours; replace when 50% consumed | Match anode material (zinc/aluminum/magnesium) to your water type. | Suzuki Anodes |
| Lower unit seals (as needed) | Inspect at gear oil change | Replace if water intrusion is detected; pressure/vacuum test after service. | Suzuki Lower Unit Seal Kits |
Frequently Used Parts Categories
- Routine Service: Suzuki Service & Maintenance Kits
- Cooling System: Suzuki Water Pump Repair Kits
- Fuel System: Suzuki Fuel Filters and Suzuki Fuel Pumps
- Ignition / Electrical: Suzuki Rectifiers and Starters
- Propulsion: Suzuki Propellers
- Corrosion Protection: Suzuki Anodes
- Gearcase Sealing: Suzuki Lower Unit Seal Kits
Common Symptoms & Quick Checks
| Symptom | Check First | Related Parts |
|---|---|---|
| Weak telltale stream or overheat alarm | Inspect intake screens for blockage, verify water pump condition, and check thermostat operation. | Water pump kit/impeller, intake screen, thermostat, gaskets |
| Poor acceleration or power loss | Check for a fouled prop, fuel quality, clogged filters, and engine management faults. | Propeller and hub, fuel filters, fuel pump, spark plugs, injectors |
| Hard starting or rough idle | Verify battery condition and connections, inspect spark plugs, and check for air leaks on fuel lines. | Battery cables, starter, spark plugs, fuel hoses, clamps |
| Gearcase noise or metal in gear oil | Drain and inspect gear oil; check for water intrusion and seal integrity. | Gear oil, drain/fill gaskets, lower unit seal kit, bearings |
| Excessive exhaust smoke (abnormal on 4-strokes) | Confirm correct oil level, look for over-fueling or PCV/ventilation issues. | Spark plugs, fuel injectors, gaskets, breather components |
FAQs
Are parts interchangeable across different years or platforms?
Some service items are shared across related Suzuki platforms, but many components differ by model code, shaft length, and rotation. Always match parts using the exact model and serial.
When should I replace the impeller?
As a rule of thumb, inspect annually and replace every 2–3 seasons (or sooner in sandy/silty water). If the telltale is weak or the engine overheats, service the pump immediately.
How often should I change gear oil?
Change gear oil every 100 hours or annually, and any time water contamination or metal debris is detected. Replace drain/fill gaskets and pressure-test the gearcase after seal work.
What information do I need to confirm part compatibility?
Provide the full model code (e.g., DF150 with suffixes), serial number, shaft length, and whether the unit is standard or counter-rotating. Photos of the nameplate help ensure accuracy.
Ready to find parts by horsepower, year, and model? Browse the main Suzuki collection and use Filter & Sort to zero in on exactly what you need.
Shop Suzuki Outboard PartsIf you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
SeaSierra
Wedge Transom Saver Motor Support – Fits Yamaha, Mercury, Honda, Johnson/Evinrude & Suzuki Outboards
Regular price $36.08Unit price