Tohatsu 4-Stroke Outboard Engine 60-70HP Parts

(1 products)

This page is tailored for Tohatsu 4‑Stroke 60–70HP outboard engines. Use it to quickly find compatible parts and practical service information. Below you’ll find maintenance intervals, frequently used replacement parts, and troubleshooting guidance. You can also browse our main Tohatsu collection for a wider selection. Tip: scroll to the bottom of this page to start browsing parts for this engine, and on the collection page use the “Filter & Sort” controls to narrow results by horsepower, year range, and part category.

Browse All Tohatsu Parts

How to Identify Your 60–70HP Model

Locate the nameplate/serial label on the transom bracket or swivel bracket (typically port side). Record the model code and serial number.
Model code tips: for example, MFS60/MFS70 followed by letters indicating shaft length (S/L/XL), steering/control type (tiller vs. remote), and other options. Suffix letters can also denote generation updates.
Confirm 4‑Stroke: cowling decals often indicate EFI/4‑Stroke; 4‑Stroke models have an engine oil dipstick and oil filter.
When ordering parts, match by model code, serial number range, and shaft length to ensure correct gaskets, impellers, and propeller hubs.

Engine Overview

Tohatsu 60–70HP 4‑Stroke Platform

Feature	Description
Configuration	Modern 4‑Stroke outboard in the 60–70HP class, typically EFI with electronic ignition; common variants include long and extra‑long shaft, tiller or remote control.
Common Models	Examples include MFS60 and MFS70 families with various shaft lengths and control options (exact code varies by year and market).
Advantages	Quiet operation, good fuel economy, solid mid‑range torque, and broad parts availability for routine service.
Notes	Many maintenance parts (impellers, anodes, filters, plugs) are shared across nearby HP ranges, but always verify by model code and serial number before ordering.

Routine Maintenance & Service Parts

Intervals below are general guidelines for Tohatsu 4‑Stroke 60–70HP engines. Always follow your specific service manual and local operating conditions.

Item	Interval*	Remarks	Parts Link
Engine oil & filter	First 20 hrs, then every 100 hrs or annually	Use NMMA FC‑W oil grade per manual; replace crush washer if applicable.	Oil Filters
Gear oil (lower unit)	Every 100 hrs or annually	Check for water intrusion or metal on magnet; replace drain gaskets.	Lower Unit Seal Kits
Spark plugs	Inspect 100 hrs; replace 300 hrs or as needed	Gap and heat range per model; replace if fouled or worn.	Spark Plugs
Fuel filter (inline/engine)	Every 100–200 hrs or annually	Replace more often with ethanol fuel or contamination.	Fuel Filters
Water pump impeller / kit	Every 2 seasons or 200 hrs (sooner for sandy use)	Restore cooling performance; inspect housing & wear plate.	Tohatsu Water Pump Repair Kits
Anodes (external & internal)	Inspect monthly in salt/brackish; replace when 50% gone	Match alloy to water type: zinc (salt), aluminum (brackish), magnesium (fresh).	Anodes
Thermostat	Inspect annually; replace 2–3 years	Stuck thermostats cause cold‑running or overheat; replace gasket.	Tohatsu Outboard Parts
Propeller & hardware	Inspect every trip; remove & grease spline each season	Check for dings, hub slip, and fishing line behind the prop.	Propellers

Frequently Used Parts Categories

All Tohatsu Outboard Parts – Browse Collection
Cooling System (Water Pump Service) – Tohatsu Water Pump Repair Kits
Fuel System – Fuel Filters
Ignition / Electrical – Electrical Items
Corrosion Protection – Anodes
Propeller & Hardware – Propellers
Lower Unit Sealing – Tohatsu Lower Unit Seal Kits

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak tell‑tale stream or overheat alarm	Inspect water intake screens for debris; verify impeller age; check thermostat for sticking.	Water pump kit, intake screen, thermostat, gaskets
Poor acceleration or power loss	Replace fuel filter; inspect spark plugs; confirm prop condition and pitch; check for water in fuel.	Fuel filter, spark plugs, propeller, anodes (drag from heavy growth)
Hard starting or rough idle	Verify battery charge and connections; inspect plugs; check for stale fuel and air leaks.	Spark plugs, fuel lines/connectors, fuel filter, electrical items
Gearcase noise or metal in gear oil	Drain gear oil and inspect for water/metal; check prop shaft for line damage; pressure test seals.	Lower unit seal kit, drain screw gaskets, prop hub/hardware

FAQs

Are parts interchangeable between different years or platforms?

Some maintenance items are shared across the MFS60–MFS70 family and nearby HP ranges, but changes by year, shaft length, and control type can affect fitment. Always confirm by model code and serial number.

When should I replace the impeller?

As a rule of thumb, service the water pump every 2 seasons or ~200 hours, sooner if you operate in sandy or shallow water or notice a weak tell‑tale stream or overheat warnings.

How often should I change gear oil?

Replace lower unit gear oil annually or every 100 hours. Inspect for milky color (water), metallic debris, and replace drain screw gaskets at each service.

What information helps confirm part compatibility?

Provide the complete model code (e.g., MFS60 or MFS70 with suffix), serial number, shaft length, control type (tiller/remote), and any relevant photos of the nameplate and the part you’re replacing.

Ready to find the right parts? Browse the main Tohatsu collection by horsepower, year, and model to verify compatibility for your 60–70HP 4‑Stroke.

Shop Tohatsu Outboard Parts

If you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.