Volvo Penta 171HP 4-Stroke Marine Engine Parts

(1 products)

This page is for Volvo Penta 4‑Stroke 171 HP outboard engines. Use it to find compatible parts, routine service information, maintenance tips, common replacement items, and quick troubleshooting guidance. You can also browse our main Volvo Penta collection for broader coverage. Scroll to the bottom of the page to start browsing parts for this engine. On the collection page, use the Filter & Sort controls to narrow results by horsepower, year range, and part category.

Browse All Volvo Penta Parts

How to Identify Your 171 HP Model

Locate the nameplate/serial plate on the transom bracket or engine mid‑section; record the full model designation and serial number.
Decode model suffixes for shaft length (e.g., short/long/XL), steering/control type, and production year revision.
Confirm 4‑stroke features such as an engine oil filter and separate crankcase oil fill; 2‑stroke models will not have an engine oil filter.
When ordering parts, use the exact model and serial number to verify gearcase style and cooling system components.

Engine Overview

171 HP Four‑Stroke Outboard Platform

Feature	Description
Configuration	Four‑stroke EFI mid‑range outboard; commonly inline‑4 architecture in this horsepower class, with electronic fuel injection and freshwater/raw‑water cooling via an impeller‑driven pump.
Common Models	171 HP 4‑Stroke outboard models within the mid‑range family; verify exact model/serial for parts compatibility.
Advantages	Strong mid‑range torque, good fuel economy, reduced emissions, and broad parts availability for routine service items.
Notes	Some components may interchange with adjacent 150–175 HP family models. Gear ratios and shaft lengths vary; match propellers and gearcase seals by model/serial.

Routine Maintenance & Service Parts

Intervals below are general guidelines for typical recreational use. Always follow the service schedule and specifications in your official Volvo Penta service manual.

Item	Interval*	Remarks	Parts Link
Engine oil & filter	Every 100 hours or annually	Warm engine before draining; replace crush washer if applicable; use marine‑rated oil meeting spec.	Volvo Penta Service & Maintenance Kits
Gear oil (lower unit)	Every 100 hours or annually; also after any suspected water intrusion	Inspect for metal on magnets and milky oil; replace drain screw gaskets; pressure/vacuum test if water is present.	Volvo Penta Lower Unit Seal Kits
Spark plugs	Inspect every 100 hours; replace 100–200 hours or as needed	Gap to spec; replace sooner if fouled, corroded, or misfire occurs.	Spark plug
Fuel filter / water‑separating filter	Every 100 hours or annually	Drain water bowl routinely; replace filter element if flow is restricted or after contamination.	Volvo Penta Fuel filters
Water pump impeller / kit	Every 2–3 seasons or 200 hours (sooner in sandy/silty water)	Replace impeller and key; inspect wear plate and cup; confirm strong tell‑tale stream.	Volvo Penta Water Pump Repair Kits
Anodes (zinc/aluminum/magnesium)	Inspect every 50 hours; replace when <50% remains	Match anode material to water type (salt/brackish/fresh); ensure clean, tight contact.	Volvo Penta Anodes

Frequently Used Parts Categories

Routine Service: Volvo Penta Service & Maintenance Kits
Cooling System: Volvo Penta Water pumps
Fuel System: Volvo Penta Fuel filters
Ignition / Electrical: Volvo Penta Starters
Charging & Sensors: Volvo Penta Alternators
Propulsion: Volvo Penta Propellers
Corrosion Protection: Volvo Penta Anodes

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak tell‑tale stream / overheat alarm	Inspect intake screens for debris, verify impeller condition, and confirm thermostat operation.	Water pump kit, impeller, thermostat, intake screens
Poor acceleration or power loss	Check fuel quality, replace/inspect fuel filter, examine propeller for damage or wrong pitch, and verify spark plugs.	Fuel filter, spark plugs, propeller, fuel pump
Hard starting / rough idle	Confirm battery voltage and connections, inspect primer bulb and lines for air leaks, and check plugs/injectors.	Spark plugs, fuel lines/bulb, starter, injectors/sensors
Gearcase noise or metal in gear oil	Verify oil level/condition, inspect drain screw gaskets, and check prop shaft for fishing line cutting seals.	Lower unit seal kit, bearings, drain screw gaskets, gear oil

FAQs

Are parts interchangeable between different years or platforms?

Some routine service parts may interchange across adjacent 4‑stroke models in the 150–175 HP range, but many items vary by model year, gearcase, and shaft length. Always confirm with your exact model and serial number.

When should I replace the water pump impeller?

As a preventive measure, replace the impeller every 2–3 seasons or about 200 hours, and sooner if you operate in sandy or silty water or notice a weak tell‑tale stream.

How often should the gear oil be changed?

Change lower unit gear oil every 100 hours or annually. Inspect for milky oil or metal on the drain plug magnets; investigate leaks and replace seals if water intrusion is found.

What information do you need to confirm part compatibility?

Please provide the full model designation, serial number, shaft length, control/steering type, and a clear photo of the nameplate. For props, include spline count and current pitch.

Ready to find parts for your Volvo Penta 4‑Stroke 171 HP outboard? Browse the main Volvo Penta collection to filter by horsepower, year, and model.

Shop Volvo Penta Parts

If you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.