Welcome Aboard!

10% savings across all ranges sitewide for new customers · Terms apply

FLASHSALE26

Volvo Penta 4-Stroke 430HP Marine Engine Parts

(1 products)

This page is dedicated to Volvo Penta 4‑Stroke 430HP marine engines. Use it to find compatible parts and service information, including maintenance tips, common replacement items, and troubleshooting guidance. You can also browse our main Volvo Penta collection. Scroll to the bottom of this page to start browsing parts for this engine. On the collection page, use the Filter & Sort controls to narrow results by horsepower, year range, and part category/section.

Browse All Volvo Penta Parts

How to Identify Your 430HP Model

  • Locate the engine serial plate: typically on a label near the ECM, valve cover, or starboard side of the engine; the sterndrive/transom shield has its own serial plate.
  • Model codes will reference the family (e.g., “V8-430”) and may include suffixes for emissions/cooling or generation; the drive model (e.g., DPS) is identified separately.
  • Confirm key specs: 4-stroke, EFI V8 gasoline platform paired with a sterndrive. Note any cooling configuration (raw-water vs. closed cooling) as it affects thermostat and pump parts.
  • Record engine serial, drive serial, and transom shield serial to ensure precise parts matching.

Engine Overview

Volvo Penta V8 430HP Gasoline Sterndrive

Feature Description
Configuration V8 gasoline, 4‑stroke, electronic fuel injection; typically paired with Volvo Penta sterndrives (often DuoProp).
Common Models V8-430 variants with different emissions/cooling packages; matched drive models identified separately (e.g., DPS).
Advantages Strong top-end power, refined EFI starting/idle, and robust mid‑range torque for sport boats and cruisers.
Notes Many service parts are engine‑family specific (spark plugs, sensors, belts), while others are drive‑specific (anodes, gearcase seals, water intakes). Always match by engine, drive, and transom shield serials.

Routine Maintenance & Service Parts

Intervals below are general guidelines for 4‑stroke gasoline sterndrive engines. Always follow the service schedule and specifications in your official Volvo Penta manual.

Item Interval* Remarks Parts Link
Engine oil & filter Every 100 hours or annually Use marine‑rated oil meeting Volvo Penta specifications; replace drain plug gasket if applicable. Volvo Penta Service & Maintenance Kits
Gear oil (sterndrive) Inspect every 50 hours; replace annually Check for water intrusion and metal shavings; pressure/vacuum test if contamination is found. Volvo Penta
Spark plugs Inspect 100 hours; replace 300 hours or as needed Gap to spec; replace sooner if misfire, hard starting, or fouling is noted. Spark plug
Fuel filter / water separator Every 100 hours or annually Drain/check for water; replace more often with ethanol blends or storage cycling. Volvo Penta Fuel filters
Raw‑water pump impeller / kit Every 2 seasons (or 200 hours) or at first sign of wear Replace sooner if overheat alarms occur, flow is weak, or vanes show set or cracking. Volvo Penta Water Pump Repair Kits
Anodes (engine/drive) Inspect every 30–60 days in water; replace when 50% consumed Choose zinc (salt), aluminum (brackish), or magnesium (fresh) as appropriate; ensure bonding is intact. Volvo Penta Anodes
Serpentine/accessory belt Inspect every 100 hours; replace 2–3 seasons or if cracked/noisy A worn belt can reduce alternator output and raw‑water pump flow. Belt

Frequently Used Parts Categories

Common Symptoms & Quick Checks

Symptom Check First Related Parts
Overheat alarm / high temperature Inspect raw‑water intake for debris; verify impeller and belt condition; confirm thermostat operation; check for collapsed hoses. Water pump repair kit, impeller, thermostat, hoses, belt
Poor acceleration / power loss Check fuel quality and water in separator; replace fuel filter; inspect spark plugs; verify propeller integrity and pitch. Fuel filter, spark plugs, injectors, propeller
Hard starting / rough idle Confirm battery voltage and connections; inspect plugs and ignition leads/coils; check for vacuum leaks; verify fuel pressure and injector condition. Spark plugs, fuel filter, injectors, starter
Gearcase noise or metal in gear oil Check gear oil level/condition; inspect propshaft for fishing line; pressure/vacuum test drive; evaluate seals and bearings. Lower unit seal kit, bearings, propeller hardware

FAQs

Are parts interchangeable between different model years or drive platforms?

Some components carry across years, but many are specific to engine generation, emissions package, cooling type, sterndrive model, and serial range. Match by engine serial, drive serial, and transom shield serial to ensure compatibility.

When should I replace the raw‑water pump impeller?

Inspect annually and replace every 2 seasons or 200 hours, whichever comes first. Replace immediately if you see overheat events, vane set, cracking, or debris damage.

How often should sterndrive gear oil be changed?

At least once per season or every 100 hours. Inspect mid‑season for water contamination and correct level, especially after groundings or heavy use.

What information helps confirm part compatibility?

Provide the engine model (e.g., V8‑430), engine serial, sterndrive model and serial, and transom shield serial. Photos of the nameplates and the part you are replacing are also helpful.

Ready to find parts by horsepower, year, and model? Browse our main Volvo Penta collection to locate compatible components for your 430HP setup.

Shop Volvo Penta Parts

If you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.
View as
Back to top

Compare /5