Yamaha 4-Stroke 13.5HP Outboard Marine Engine Parts

(14 products)

This page covers Yamaha 4‑Stroke 13.5HP outboard engines and helps you quickly locate compatible parts and essential service information. Below you’ll find maintenance tips, common replacement parts, and troubleshooting guidance. You can also browse our main Yamaha collection for a wider selection. Scroll to the bottom of this page to start browsing parts for this engine; on the collection page use the “Filter & Sort” controls to narrow results by horsepower, year range, and part category.

Browse All Yamaha Parts

How to Identify Your 13.5HP Model

Locate the nameplate/serial tag on the transom clamp bracket or swivel bracket. It lists the model code, serial number, and shaft length.
Model code basics: “F” indicates 4‑stroke. Example: F13.5B. Suffix letters/numbers can indicate shaft length (S=15", L=20"), start/controls (tiller vs. remote), and production revision.
Platform cues: Most 13.5HP units are small, carbureted 4‑stroke twin‑cylinders. They share many service parts with contemporary 9.9HP and 15HP siblings—always confirm by model code and serial.
Approximate year range: Many F13.5 models appear in late‑1990s through late‑2000s production (e.g., F13.5B in the late 2000s). Verify exact year from your ID tag.

Engine Overview

Small Inline‑2 4‑Stroke Platform (shared with 9.9/15HP family)

Feature	Description
Configuration	Twin‑cylinder, carbureted 4‑stroke portable outboard; manual or electric start; tiller or remote options depending on suffix.
Common Models	Examples include F13.5B (late‑2000s). Many routine parts align with 9.9HP/15HP models from the same era.
Advantages	Lightweight, quiet operation, good fuel economy, and straightforward service routine.
Notes	Cooling and fuel system parts are critical for reliability; many items are shared with 9.9/15HP variants, but verify by model code/serial before ordering.

Routine Maintenance & Service Parts

Intervals below are typical guidelines for small Yamaha 4‑stroke outboards. Always follow your official owner’s/service manual for your exact model and operating conditions.

Item	Interval*	Remarks	Parts Link
Engine oil & filter	First 20 hrs; then every 100 hrs or annually	Warm engine before draining; replace crush washer if required.	Yamaha Service & Maintenance Kits
Gear oil (lower unit)	Every 100 hrs or annually	Inspect for water intrusion/metal paste; replace drain screw gaskets.	Yamaha Lower Unit Seal Kits
Spark plugs	Inspect 100 hrs; replace ~200 hrs or as needed	Check gap and color; replace fouled or worn plugs.	Spark plug
Fuel filter (in‑line/under‑cowl)	Inspect 100 hrs; replace if restricted/contaminated	Drain or replace if water/debris is present; use fresh fuel.	Fuel Filters
Water pump impeller/kit	Every 2–3 seasons (annually in sandy/silty water)	Replace sooner if weak tell‑tale or overheat warnings occur.	Yamaha Water Pump Repair Kits
Anodes (internal & external)	Inspect every 50 hrs; replace when ~50% depleted	Match material to your water type (aluminum/magnesium/zinc).	Yamaha Anodes

Frequently Used Parts Categories

Routine Service – Yamaha Service & Maintenance Kits
Cooling System – Yamaha Water Pump Repair Kits
Fuel System – Fuel Pumps
Gearcase & Seals – Yamaha Lower Unit Seal Kits
Propellers & Hubs – Yamaha Propellers
Electrical & Starting – Electrical Items
Oil Seals & Gaskets – Yamaha Oil Seals · Yamaha Gaskets

Common Symptoms & Quick Checks

Symptom	Check First	Related Parts
Weak tell‑tale or overheat alarm	Inspect intake screen for debris; verify impeller condition and housing; check thermostat operation.	Water pump repair kit, impeller, thermostat, intake screen
Hard starting / rough idle	Use fresh fuel; squeeze primer bulb; inspect/replace fuel filter; check spark plugs and idle mixture settings.	Fuel filter, primer bulb/lines, spark plugs, carburetor service parts
Poor acceleration / power loss	Check prop condition/pitch; look for fuel restriction or clogged jets; verify throttle linkage and compression.	Propeller, fuel filter, fuel pump, carburetor service parts
Gearcase noise / metal in gear oil	Drain gear oil; inspect for water intrusion (milky oil) and metal flakes; pressure test if needed; replace seals as required.	Lower unit seal kit, drain plug gaskets, gear oil

FAQs

Are parts interchangeable with 9.9HP or 15HP Yamaha 4‑stroke models?

Many routine service items (impellers, filters, some ignition parts) are shared across the 9.9/13.5/15HP family. Always confirm compatibility using your full model code, serial number, and shaft length before ordering.

When should I replace the water pump impeller?

For typical recreational use, replace every 2–3 seasons. In sandy, silty, or shallow conditions—or if the tell‑tale is weak—replace annually or at the first sign of overheating.

How often should I change the gear oil?

At least once per year or every 100 hours. If you see milky oil or metal debris, service immediately and inspect/replace seals.

What information do you need to verify part fitment?

Please provide the full model code (e.g., F13.5 with suffix), serial number, shaft length (S/L), and any details about start/controls (tiller vs. remote). Photos of the nameplate and the part you’re replacing are very helpful.

Ready to find parts for your Yamaha 4‑Stroke 13.5HP? Browse the main Yamaha collection and filter by horsepower, year, and category to locate the right items fast.

Shop Yamaha Outboard Parts

If you’re unsure about your model, send us a photo of the nameplate and the part you need and we’ll help verify compatibility.