Yamaha 4-Stroke 4-175HP Outboard Marine Engine Parts
(1 products)Designed for Yamaha 4-Stroke 4–175 HP outboard engines, this page helps you quickly find compatible parts and service information. Inside you7ll find maintenance tips, commonly replaced components, and troubleshooting guidance. You can also browse our main Yamaha collection, and at the bottom of this page you7ll find a quick way to start browsing parts for your engine. On the collection page, use the Filter & Sort controls to narrow results by horsepower, year range, and part category.
Browse All Yamaha PartsHow to Identify Your 4175 HP Model
- Locate the nameplate/serial sticker on the transom bracket or swivel bracket. It lists the model code, serial number, and shaft length.
- Read the model code: for example, an 22F 22 prefix indicates 4-stroke; numeric value is horsepower; suffix letters note shaft length (S/L/XL), steering/controls, and revision year.
- Confirm platform type: portables (F4F9.9) are typically single/twin-cylinder; mid-range (F25F90) are inline-3/4; larger (F115F175) are inline-4 EFI.
- Match year/serial when ordering critical items (impeller kits, oil filters, fuel filters), as running changes can affect fitment.
Platform Overview
Portable Four-Stroke (F4F9.9)
| Feature | Description |
|---|---|
| Configuration | Single-cylinder (F4F6) or twin-cylinder (F8F9.9) 4-stroke, mostly carbureted; manual or electric start. |
| Common Models | F4, F6, F8, F9.9 (e.g., F6SMH, F9.9LMH). |
| Advantages | Lightweight and portable; simple service; ideal for tenders and small craft. |
| Notes | Inspect impeller and anodes regularly; verify model-year specifics for tune-up items and gaskets. |
Mid-Range Inline (F25F90)
| Feature | Description |
|---|---|
| Configuration | Inline-3 and inline-4 4-stroke; EFI common on later models; mechanical or tiller controls. |
| Common Models | F25, F30, F40, F50, F60, F70, F75, F90. |
| Advantages | Good fuel economy and mid-range torque; wide propeller availability. |
| Notes | Follow EFI fuel filtration intervals; water pump and gear oil service are key for longevity. |
Inline-4 EFI (F115F175)
| Feature | Description |
|---|---|
| Configuration | Inline-4 EFI 4-stroke (approx. 1.8L2.8L displacement), including F115, F150, and F175 variants. |
| Common Models | F115, F150, F175 (some models available in digital or mechanical control versions). |
| Advantages | Refined EFI operation, strong all-around performance, broad parts support. |
| Notes | Observe correct oil capacities and filter specs by model code; multi-stage fuel filtration and regular gear lube changes are recommended. |
Routine Maintenance & Service Parts
Intervals below are general guidelines for Yamaha 4-stroke outboards. Always confirm your exact schedule and specifications in the official service manual for your model and operating conditions.
| Item | Interval* | Remarks | Parts Link |
|---|---|---|---|
| Engine oil & filter | Every 100 hours or annually | Warm engine, drain thoroughly; replace crush washer if required; use marine 4-stroke oil grade per manual. | Yamaha Service & Maintenance Kits |
| Gear oil (lower unit) | Every 100 hours or annually | Check for water contamination (milky oil). Replace seals if intrusion is found. | Yamaha Service & Maintenance Kits |
| Spark plugs | 100150 hours or as needed | Inspect gap and condition; replace sooner with hard starting or misfire. | Spark Plugs |
| Fuel filter / water separator | Every 100 hours or each season | Replace more often in high-ethanol or contaminated fuel environments. | Fuel Filters |
| Water pump impeller / kit | Every 23 years or 200 hours | Replace sooner with weak tell-tale stream, overheat alerts, or sand/silt use. | Yamaha Water Pump Repair Kits |
| Anodes (internal & external) | Inspect every 50 hours; replace when 50% depleted | Use the correct alloy for fresh, brackish, or saltwater. | Yamaha Anodes |
| Lower unit seal kit (on condition) | As needed if water in gear oil or seal damage | Inspect prop shaft for fishing line; pressure/vacuum test if intrusion suspected. | Yamaha Lower Unit Seal Kits |
| Propeller & hardware inspection | Each season and after impacts | Check for dings and bent blades; verify correct pitch and hub condition. | Yamaha Propellers |
Frequently Used Parts Categories
- Routine Service Kits Yamaha Service & Maintenance Kits
- Cooling System Yamaha Water Pump Repair Kits
- Gearcase Seals Yamaha Lower Unit Seal Kits
- Corrosion Protection Yamaha Anodes
- Ignition / Electrical Electrical Items
- Propulsion Yamaha Propellers
- Gaskets & Sealing Yamaha Gaskets
Common Symptoms & Quick Checks
| Symptom | Check First | Related Parts |
|---|---|---|
| Weak tell-tale stream or overheat alarm | Inspect intake screens for debris; verify impeller condition; thermostat operation. | Water pump kit, intake screen, thermostat, gaskets |
| Poor acceleration or power loss | Check prop damage/pitch; replace fuel filter; inspect spark plugs; verify throttle and timing controls. | Propeller, fuel filter, spark plugs, fuel hose/primer bulb |
| Hard starting or rough idle | Confirm fresh fuel; inspect plugs; check for air leaks on fuel lines; clean idle passages as applicable. | Spark plugs, inline fuel filter, fuel line/primer bulb, gaskets |
| Gearcase noise or metal in gear oil | Verify correct gear oil level/condition; inspect prop shaft for line; evaluate seals and bearings. | Gear lube, lower unit seal kit, bearings, prop shaft hardware |
| Trim/tilt won7t hold or is slow | Check fluid level; inspect electrical connections; look for external leaks at ram seals. | Trim motor, seals, electrical connectors/relays |
FAQs
Are parts interchangeable between different years or platforms?
Some items interchange across years, but changes within a model family can alter fit (filters, impellers, gaskets, electronics). Always match by full model code and serial to confirm compatibility.
When should I replace the impeller?
As a preventive service, replace every 23 years or ~200 hours. In sandy or silty water, or if the stream weakens, replace sooner and inspect the pump housing.
How often should I change gear oil?
Typically every 100 hours or annually. If you see water contamination, metal, or burnt odor, service immediately and consider a seal kit with a pressure/vacuum test.
What information helps confirm part compatibility?
Provide the full model code from the nameplate, serial number, shaft length, control type (tiller/remote), and any known year range. A clear photo of the nameplate and the part area also helps.
Ready to find parts by horsepower, year, and model? Browse our main Yamaha outboard collection and use the Filter & Sort controls to zero in on your engine.
Shop Yamaha Outboard PartsIf you7re unsure about your model, send us a photo of the nameplate and the part you need and we7ll help verify compatibility.
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
SeaSierra
Inline Fuel Filter – Yamaha, Mercury/Mariner, Tohatsu/Nissan & Honda 4–20 HP Applications
Regular price $13.75Unit price