7" x 4" Boat Trailer Bow Roller Assembly with 1/2" Shaft
7" x 4" Boat Trailer Bow Roller Assembly with 1/2" Shaft is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
7" x 4" Boat Trailer Bow Roller Assembly with 1/2" S...
7" x 4" Boat Trailer Bow Roller Assembly with 1/2" Shaft is backordered and will ship as soon as it is back in stock.
Product Details
This 7" x 4" boat trailer bow roller assembly with a 1/2-inch mounting shaft provides stable support for a boat's bow during loading, launching, retrieval, and trailering. The non-marking polyurethane roller is designed to cushion the bow while helping resist wear from sunlight, water, and routine marine use.
Before ordering, compare the dimensions and mounting requirements with your existing trailer hardware. This assembly is intended for trailer brackets that use a 1/2-inch mounting shaft.
- Bolt-on installation for compatible trailer brackets using a 1/2-inch shaft.
- Non-marking polyurethane roller helps reduce scuffs and contact damage to the boat hull.
- Assembly includes the roller, end bells, and mounting hardware listed below.
Product Reference
Use the following description and measurements to compare this replacement with your existing bow roller before purchase.
| Item | Details |
|---|---|
| Product | 7" x 4" boat trailer bow roller assembly |
| Mounting requirement | 1/2-inch shaft or compatible mounting bracket |
| Material | Polyurethane |
Trailer Compatibility
This is a trailer component rather than an engine-specific part. Compatibility depends on the trailer bracket, shaft diameter, available clearance, and roller dimensions. Confirm these details before ordering.
| Application | Requirement | Notes |
|---|---|---|
| Boat trailers | Compatible 1/2-inch mounting shaft or bracket hole | Compare the existing roller, bracket, shaft, and available clearance before installation. |
Technical Specs
- Product Type
- Boat trailer bow roller assembly
- Installation
- Bolt-on
- Mounting Shaft Size
- 1/2 inch (12.7 mm)
- Material
- Polyurethane (PU)
- Dimensions
- 7" L x 4" W (177.8 mm x 101.6 mm)
- Center Hole Diameter
- 17 mm (0.67 in)
- Weight
- 0.94 kg (2.07 lb)
- Surface
- Non-marking polyurethane surface
What's in the Box
- 1 x Bow roller, 7" x 4"
- 2 x End bells
- 1 x Mounting bolt with washer
Installation Notes
- Chock the trailer wheels and ensure the boat is properly supported to prevent movement.
- Remove the nut from the existing bow roller bolt, then slide the bolt out of the bracket.
- Remove the old roller and end bells. Clean dirt, corrosion, and debris from the mounting bracket.
- Position one end bell on each side of the new bow roller.
- Align the assembly with the bracket mounting holes and insert the mounting bolt.
- Install the washer and nut, then tighten securely without overtightening. The roller should turn freely with minimal side-to-side play.
- Check the roller's alignment with the boat's bow and confirm that the hull contacts the roller correctly before use.
Troubleshooting & FAQ
How do I know if this roller will fit my trailer?
Confirm that your trailer uses a compatible 1/2-inch (12.7 mm) mounting shaft or bracket hole. Also compare the existing roller's length, width, center opening, bracket spacing, and available clearance before ordering.
What is the advantage of a polyurethane roller?
Polyurethane provides a durable, non-marking contact surface that helps cushion the boat's bow and reduce scuffs during loading and retrieval. It is also suitable for routine exposure to water and normal marine conditions.
What are the signs that my bow roller needs to be replaced?
Inspect the roller for deep cracks, flat spots, deformation, or excessive wear. A roller that is seized or does not turn freely can increase friction and contribute to hull damage during loading or launching.
Is this an engine-specific part?
No. This is a boat trailer bow roller assembly. Fitment is determined by the trailer's roller bracket, shaft diameter, dimensions, and clearance rather than by an engine model.
Is this an OEM component?
This listing is for an aftermarket replacement bow roller assembly. Compare the product dimensions and mounting requirements with your original hardware before installation.
How should I confirm the contents before installation?
Check that the package contains one 7" x 4" bow roller, two end bells, and one mounting bolt with washer. If any component is missing or damaged, contact the seller before installation.
Safety & Important Information
- Verify the dimensions, mounting shaft size, bracket fit, and available clearance against your trailer before ordering.
- Support the boat securely and chock the trailer wheels before removing or installing the roller assembly.
- After installation, confirm that the roller spins freely, the fastener is secure, and the boat's bow is properly aligned.
- Do not use the trailer if the roller or mounting hardware is cracked, loose, seized, or incorrectly aligned.
- Professional installation is recommended when the trailer structure or mounting hardware is damaged or difficult to access.
About Sea Sierra
- Marine Replacement Parts — We offer replacement components for boat, trailer, and marine applications.
- Practical Product Information — Compare dimensions, mounting requirements, and application details before ordering.
- Support — Contact customer service for assistance with product questions, order support, and current return-policy information.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
