Aftermarket Carburetor for Suzuki DF4 and DF6 4-Stroke Outboards – Replaces 13200-91J70, 13200-91JB1, 13200-91J00 and More

Product Details

This aftermarket carburetor is designed for Suzuki DF4 and DF6 four-stroke outboard motors. It replaces the original carburetor assembly and supports accurate fuel metering for reliable starting, idle quality, and throttle response when matched to the correct engine model and serial-number range.

The supplier identifies this product as a single carburetor for Suzuki outboard motors and lists the OEM reference numbers below. It is not an OEM Suzuki component. Confirm the model designation, four-stroke configuration, serial prefix, mounting arrangement, and original part number before ordering.

• Replacement carburetor for Suzuki DF4 and DF6 four-stroke outboards
• Single carburetor unit; not a multi-part kit
• Designed for the model and serial ranges shown below
• For marine gasoline applications using fuel suitable for the engine manufacturer’s specifications

OEM Reference Numbers

The supplier lists the following Suzuki OEM reference numbers for this replacement carburetor. Reference numbers alone do not replace the need to verify the complete engine model and serial range.

Engine and Model Compatibility

Catalog records associate the listed carburetor references with Suzuki DF4 and DF6 four-stroke models from 2005 through 2011. Keep the engine model, horsepower, four-stroke configuration, year, and serial prefix together when checking fitment.

Technical Specifications

Product type

Aftermarket replacement carburetor

Application

Suzuki DF4 and DF6 four-stroke outboard motors

Rated engine range

4 HP and 6 HP

Engine position

Outboard

Compatible stroke

4-Stroke only

Verified catalog year range

2005–2011, subject to the model and serial-prefix conditions listed above

OEM reference numbers

13200-91J70, 13200-91JB1, 13200-91J00, 13200-91J90, 13200-91JM0, 13200-91JC0, 13200-91J81

What’s in the Box

• Aftermarket Suzuki DF4/DF6 four-stroke carburetor: 1 unit

Gaskets, hoses, linkage hardware, and other installation parts are not confirmed as included unless specifically shown or stated for the supplied package.

Installation Notes

1. Stop the engine, disconnect the battery where applicable, and allow the engine to cool.
2. Close or safely isolate the fuel supply and relieve fuel-system pressure before removing fuel lines.
3. Remove the engine cowling and document the routing and adjustment of the throttle and choke linkages.
4. Disconnect the fuel line and control linkages from the original carburetor.
5. Remove the carburetor fasteners and take off the original assembly.
6. Inspect the intake surface and replace the mounting gasket with the correct new gasket if the old gasket is damaged or cannot be reused.
7. Install the replacement carburetor and tighten the fasteners evenly to the engine manufacturer’s specification.
8. Reconnect the fuel line, throttle linkage, and choke linkage. Confirm that each linkage moves freely through its full range.
9. Prime the fuel system, inspect carefully for leaks, and start the engine in a safe, well-ventilated area.
10. Check idle and throttle operation. Make any required adjustments only according to the applicable Suzuki service information.

Troubleshooting & FAQ

How do I confirm fitment for my engine?

Compare the complete engine model, horsepower, four-stroke configuration, year, and beginning serial prefix with the compatibility table. Also compare the original carburetor and mounting arrangement before installation.

Will this carburetor fit a Suzuki DF5?

The company fitment record specifically identifies Suzuki DF4 and DF6 four-stroke outboards. DF5 fitment is not confirmed for this product, so do not rely on the DF5 reference in the previous page copy.

Will this carburetor fit a two-stroke outboard?

No. This listing is for the Suzuki DF4 and DF6 four-stroke application shown above. Do not install it on a two-stroke engine.

What symptoms can indicate a worn or blocked carburetor?

Hard starting, unstable idle, hesitation during acceleration, poor throttle response, fuel leakage, or abnormal fuel consumption may indicate a carburetor or fuel-system problem. Diagnose the complete fuel and ignition systems before replacing parts.

Does the carburetor require adjustment after installation?

Follow the service procedure for your exact engine model. Do not change factory settings or mixture adjustments without the applicable service information, and verify idle and leak-free operation before use.

Is this an OEM Suzuki part?

No. This is an aftermarket replacement carburetor that references the Suzuki OEM numbers listed on this page.

Safety and Important Information

• Verify the complete model and serial-prefix information before ordering.
• Confirm the replacement carburetor matches the original part, mounting points, fuel connections, and linkage arrangement.
• Use appropriate fire protection and work in a well-ventilated area when handling gasoline.
• Inspect all fuel connections for leaks before operating the outboard.
• Professional installation is recommended if you are not familiar with outboard fuel systems.

About Sea Sierra

• Marine replacement parts selected for practical outboard repair and maintenance.
• Clear model and serial-range information to help customers verify fitment before ordering.
• Support for installation and product questions through the Sea Sierra service team.