Fuel Filter for Suzuki 4-Stroke Outboards – Replaces 15410-87L00 and 15410-87LL0

Product Details

This aftermarket Suzuki Outboard Fuel Filter is an in-line replacement filter for selected Suzuki four-stroke outboard fuel systems. It is listed for use with Suzuki fuel-filter applications using OEM references 15410-87L00 and 15410-87LL0.

The filter is installed in the fuel line to help remove contaminants before fuel reaches the engine. Always compare the filter, connections, flow direction, engine model, year, and serial-number range with your original part and service information before ordering.

• In-line fuel-filter design for compatible Suzuki outboard fuel systems.
• Aftermarket replacement for the listed Suzuki OEM references.
• Suitable for gasoline outboard fuel applications when the original filter specifications match.
• Single replacement fuel filter; mounting brackets, hoses, clamps, and other service-kit components are not included.

Part Number Matrix

Use the following manufacturer references when comparing your existing filter. These numbers identify the applicable replacement reference and are not a statement that every Suzuki engine uses the same filter.

Engine & Model Compatibility

Catalog references associate the 15410-87L00 fuel-filter application with the Suzuki four-stroke models and model families below. Fitment remains dependent on the exact model designation, year, and serial-number range.

Important: The compatibility information above is model-specific. Horsepower alone is not sufficient to confirm fitment. Check the complete engine model code, production year, serial-number range, and the number on your original filter before installation.

Technical Specs

Product Type

Fuel Filter

Installation

In-line

Fuel Type

Gasoline

Application

Selected Suzuki 4-stroke outboard fuel systems

OEM References

15410-87L00; 15410-87LL0

Product Format

Single replacement filter

What’s in the Box

• 1 x Fuel Filter

Hoses, clamps, brackets, fuel-pump components, and maintenance-kit parts are not included unless specifically shown in the product package.

Installation Notes

1. Stop the engine, allow it to cool, and shut off the fuel supply before beginning work.
2. Work in a well-ventilated area away from flames, sparks, and ignition sources.
3. Place an approved container or absorbent material below the filter to catch fuel.
4. Note the fuel-flow arrow and hose orientation on the original filter.
5. Release the fuel-line clamps and remove the old filter carefully.
6. Install the replacement filter with the flow arrow pointing toward the engine.
7. Secure both fuel lines with the appropriate clamps and check that the connections are fully seated.
8. Prime the fuel system according to the engine service instructions, then inspect carefully for leaks before starting the engine.

Troubleshooting & FAQ

Safety & Important Info

• Fuel is flammable. Relieve fuel-system pressure where applicable and prevent spills during service.
• Confirm fitment using the complete engine model and serial-number information, not horsepower alone.
• Do not use the filter if the housing, ports, or connections differ from the original application.
• After installation, inspect all connections for leaks before operating the engine.
• Professional installation is recommended when you are not familiar with marine fuel-system service.

About Sea Sierra

• Marine Replacement Parts — Parts selected for common outboard maintenance and repair applications.
• Application-Focused Listings — Product references and fitment information are provided to support accurate part comparison.
• Customer Support — Compare your original part and engine information before ordering, and contact support if you need help confirming an application.