Fuel Pump for Yamaha F150 and FL150 150HP 4-Stroke Outboards – Replaces 63P-24410-00, 63P-24410-10 and 63P-24410-20

Product Details

This fuel pump is a replacement component for Yamaha 4-stroke marine outboard engines rated at 150 HP. The company application data identifies it for Yamaha F150 and FL150 models. Confirm the model and original pump reference before ordering.

This replacement fuel pump is listed for Yamaha OEM part numbers 63P-24410-00, 63P-24410-10, and 63P-24410-20.

• Replacement fuel pump for Yamaha 150 HP 4-stroke outboards
• Application includes Yamaha F150 and FL150 models
• Designed for gasoline marine outboard fuel systems
• Single fuel pump supplied; this is not a pump kit

Part Number Matrix

Use the following Yamaha references to compare your original fuel pump before purchase.

Engine & Model Compatibility

The confirmed company application is limited to the model and horsepower details shown below. Model-year and serial-number coverage is not specified in the available product data, so verify the original part number and engine configuration before ordering.

Technical Specs

Component

Fuel pump

Application

Yamaha marine outboards

Horsepower

150 HP

Stroke

4-stroke

Fuel Type

Gasoline

Compatible Models

Yamaha F150 and FL150

OEM References

63P-24410-00, 63P-24410-10, 63P-24410-20

Model Years and Serial Range

Not specified; verify the original pump reference and engine identification before ordering.

What's in the Box

• 1 × Fuel Pump

Installation Notes

1. Disconnect the battery and relieve fuel-system pressure before beginning work.
2. Remove the engine cowling to access the fuel-pump mounting location.
3. Identify and label the fuel-line connections before disconnecting the original pump.
4. Remove the original fuel pump from its mounting position.
5. Install the replacement pump in the same position and confirm that the mounting points align.
6. Reconnect the fuel lines securely and verify that hoses and clamps are properly seated.
7. Reconnect the battery and prime the fuel system according to the engine manufacturer's procedures.
8. Inspect all connections for fuel leaks before starting the engine.
9. Run the engine in a safe, well-ventilated area and check for proper operation.

Fuel-system work should be performed by a qualified technician when the correct installation procedure, fittings, or safety requirements are uncertain.

Troubleshooting & FAQ

How do I know if my fuel pump is failing?

Possible symptoms include difficult starting, engine hesitation, loss of power under load, inconsistent fuel delivery, or unexpected stalling. Confirm the diagnosis with the appropriate fuel-system tests and inspect the related hoses, fittings, filters, and electrical or mechanical drive components as applicable.

Will this fit my Yamaha F150 or FL150?

The confirmed application is Yamaha F150 and FL150 150 HP 4-stroke outboards. Model-year and serial-number coverage is not specified in the available product data. Before ordering, compare your original pump with the listed Yamaha references: 63P-24410-00, 63P-24410-10, or 63P-24410-20.

Is this a complete fuel-pump kit?

No. This listing is for one fuel pump. Additional gaskets, seals, hoses, clamps, brackets, or other installation parts are not included unless specifically shown or stated.

Can I install it myself?

Installation may be possible for an experienced marine mechanic with the correct tools and service information. Because the work involves gasoline and the engine fuel system, follow the manufacturer's safety procedures or use a qualified marine technician.

Is this an OEM Yamaha pump?

This listing is for a replacement fuel pump, not a Yamaha-branded OEM component. The listed Yamaha numbers are reference numbers used to compare the application.

Do I need to replace any gaskets or seals?

Inspect all seals, gaskets, hoses, and clamps during installation. Replace any damaged or worn parts as required. This package includes one fuel pump only; additional installation parts are not included unless specifically stated.

What should I verify before ordering?

Verify the engine brand, F150 or FL150 model designation, 150 HP rating, 4-stroke configuration, and the original fuel-pump reference. Do not rely on model name alone when the year or serial range is unknown.

Safety & Important Info

• Relieve fuel-system pressure and keep the work area away from open flames, sparks, and ignition sources.
• Verify the engine model and original pump reference before purchase.
• Do not install the pump if the fittings, mounting arrangement, or original part differ from the replacement.
• This package contains one replacement fuel pump; additional gaskets, seals, hoses, and hardware are not included unless specifically stated.
• Professional installation is recommended for fuel-system work.

About Sea Sierra

• Marine replacement parts selected for specified engine applications.
• Clear part-number and fitment information to help support accurate ordering.
• Contact support if you need help comparing the listed references with your original component.