Power Trim and Tilt Switch for Yamaha Outboard – Reference Numbers 63D-82563-11, 63D-82563-10, 63D-82563-00

Product Details

This Power Trim and Tilt Switch is a replacement switch for Yamaha outboard applications. It is intended to operate the outboard's power trim and tilt system through the appropriate original control circuit.

Use the reference numbers below to compare this switch with the part installed on your outboard or listed in your engine parts documentation. Confirm the switch appearance, connector, mounting arrangement, model, year, and wiring before ordering.

• Power trim and tilt switch assembly
• For Yamaha outboard applications
• Single replacement switch; no additional components are specified as included
• Verify connector and mounting details against the original switch before installation

Part Number References

The following Yamaha reference numbers are listed for this product. Number references alone do not confirm fitment for every engine model, year, control box, or wiring configuration.

Application Information

This switch is identified for Yamaha outboard power trim and tilt use. A complete model-and-year fitment list is not provided in the current product records, so compatibility should be confirmed using the original switch and the applicable Yamaha parts documentation.

Technical Specs

Product Type

Power trim and tilt switch

Application

Yamaha outboard control system

Reference Numbers

63D-82563-11, 63D-82563-10, 63D-82563-00

Function

Controls the power trim and tilt circuit when installed in a compatible Yamaha application

Product Configuration

Single switch assembly

What's in the Box

• 1 × Power Trim and Tilt Switch

Installation Notes

1. Disconnect the battery negative terminal before working on the outboard's electrical system.
2. Locate the existing trim and tilt switch on the applicable control or remote handle assembly.
3. Compare the replacement switch with the original, including the connector, terminal arrangement, mounting points, and switch orientation.
4. Disconnect the original switch carefully. Label wires or photograph their positions if the connection is not a keyed plug.
5. Remove the original switch and install the replacement using the original mounting hardware where applicable.
6. Reconnect the wiring exactly as installed on the original switch. Do not force a connector or modify the wiring unless the application documentation specifically permits it.
7. Reconnect the battery and test trim operation in both directions with the engine secured and the propeller clear of people and objects.
8. If the system does not operate correctly, disconnect power and recheck the wiring, terminals, fuse, relay, and trim motor circuit.

Troubleshooting & FAQ

How do I confirm this switch fits my Yamaha outboard?

Compare your original switch with the product before ordering. Check the original reference number, connector, terminal layout, mounting arrangement, switch shape, and the model information in your Yamaha parts documentation. The reference numbers listed for this product are 63D-82563-11, 63D-82563-10, and 63D-82563-00.

Does this listing include the trim motor, relay, wiring harness, or control box?

No. This listing is for one power trim and tilt switch. The product records do not specify additional components or hardware as included.

What should I check if trim and tilt do not work after installation?

First disconnect the battery and check the connector, terminal positions, wiring, fuse, and relay. Also inspect the battery supply and trim motor circuit. If the motor operates when tested through the proper diagnostic procedure but the switch does not command movement, the switch or its wiring may be the source of the problem.

Can I install this switch without checking the wiring?

No. Even when a reference number appears similar, control assemblies can differ by model, year, connector, or wiring configuration. Confirm the original arrangement before connecting the replacement.

Is this an OEM Yamaha switch?

This listing is for a replacement switch. It is not represented as a genuine Yamaha-manufactured component. Yamaha reference numbers are provided only for identification and compatibility comparison.

When should the switch be replaced?

Replacement may be appropriate when the trim or tilt control is intermittent, operates in only one direction, fails to return correctly, or has damaged terminals, housing, or wiring connections. Diagnose the complete circuit before replacing the switch.

Safety & Important Information

• Disconnect the battery before removing or connecting electrical components.
• Confirm the part, connector, terminals, mounting points, and wiring against the original component before installation.
• Do not rely on horsepower or year-range claims alone; a complete fitment list is not provided for this product.
• Professional installation is recommended when the electrical configuration or trim and tilt circuit is uncertain.

About Sea Sierra

• Marine Parts Selection — We provide replacement components for common marine service and repair needs.
• Fitment-Focused Information — Reference numbers and application details are provided to help customers compare replacement parts.
• Support for Installation Decisions — Always compare the replacement with the original component and applicable service documentation before installation.