Water Pump Impeller Service Kit for Honda BF75D, BF90D and BF100A 4-Stroke Outboards – Replaces 06192-ZY9-H00 and 06192-ZY9-H01
Water Pump Impeller Service Kit for Honda BF75D, BF90D and BF100A 4-Stroke Outboards – Replaces 06192-ZY9-H00 and 06192-ZY9-H01 is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
Water Pump Impeller Service Kit for Honda BF75D, BF90D and BF100A 4...
Water Pump Impeller Service Kit for Honda BF75D, BF90D and BF100A 4-Stroke Outboards – Replaces 06192-ZY9-H00 and 06192-ZY9-H01 is backordered and will ship as soon as it is back in stock.
Product Details
This water pump impeller service kit is designed for specified Honda 4-stroke outboards in the BF75D, BF90D and BF100A families. It supplies the listed replacement components needed when servicing the water pump in the lower unit or gear case.
The kit is associated with Honda reference numbers 06192-ZY9-H00, 06192-ZY9-H01 and 06192-ZY9-H02, plus aftermarket reference AM06193-ZY9-H01. These numbers are provided for cross-reference only; confirm the exact part number, engine model and service configuration before ordering.
- Installation location: Water pump assembly in the lower unit or gear case.
- Service purpose: Replaces worn water-pump components to help restore cooling-water circulation.
- Material description: The impeller is a marine-use neoprene rubber component; inspect all related pump surfaces during installation.
- Important: This is an aftermarket replacement kit, not a Honda Genuine OEM kit.
Part Number Matrix
The following references are associated with this replacement kit. Do not assume that every number is a direct supersession without confirming it against the engine serial range and the original part.
| Brand or Source | Reference Number | Use |
|---|---|---|
| Honda | 06192-ZY9-H00 | OEM reference |
| Honda | 06192-ZY9-H01 | Primary OEM reference |
| Honda | 06192-ZY9-H02 | Additional OEM reference |
| Aftermarket | AM06193-ZY9-H01 | Aftermarket cross-reference |
Engine & Model Compatibility
This kit is listed for the following Honda 4-stroke outboard model families. Model suffixes, production years and serial-number ranges can affect fitment, so verify the complete engine identification before installation.
| Brand | Model | Rated HP | Stroke | Reference Numbers | Fitment Note |
|---|---|---|---|---|---|
| Honda | BF75DK3 | 75 | 4-Stroke | 06192-ZY9-H00 / 06192-ZY9-H01 | Confirm the complete model and serial information. |
| Honda | BF75DK4 | 75 | 4-Stroke | 06192-ZY9-H00 / 06192-ZY9-H01 | Confirm the complete model and serial information. |
| Honda | BF90DK4 | 90 | 4-Stroke | 06192-ZY9-H00 / 06192-ZY9-H01 | Confirm the complete model and serial information. |
| Honda | BF90DK5 | 90 | 4-Stroke | 06192-ZY9-H00 / 06192-ZY9-H01 | Confirm the complete model and serial information. |
| Honda | BF100A | 100 | 4-Stroke | 06192-ZY9-H00 / 06192-ZY9-H01 | Confirm the complete model and serial information. |
Technical Specifications
- Product Type
- Water pump impeller service kit
- Application
- Specified Honda 4-stroke outboards
- Installation Location
- Lower unit / gear case water pump
- Fuel Type
- Gasoline outboard engines
- Impeller Material
- Neoprene rubber
- Kit Function
- Routine water-pump service and cooling-system maintenance
What's in the Box
- 1 x Water pump impeller, reference 19210-ZY9-H01
- 1 x O-ring, reference 91356-ZW1-B00
- 1 x Driveshaft key, reference 90752-ZW1-B02
- 1 x Water pump gasket, reference 19234-ZW1-B00
The water-pump housing, lower-unit hardware, lubricants and tools are not listed as included components.
Installation Notes
- Disconnect the battery and follow the outboard manufacturer's preparation procedure.
- Drain the lower unit gearcase lubricant if required for lower-unit removal.
- Remove the lower unit from the driveshaft housing according to the service manual.
- Remove the water-pump housing and expose the old impeller, gasket, O-ring and driveshaft key.
- Inspect and clean the pump housing, wear plate and mating surfaces. Replace damaged parts that are not included in this kit.
- Install the new gasket and driveshaft key.
- Install the impeller on the driveshaft, turning the vanes in the correct direction for the engine rotation.
- Lubricate the new O-ring with a suitable marine lubricant and seat it correctly in its groove.
- Reinstall the water-pump housing and tighten fasteners to the manufacturer's specified torque.
- Reattach the lower unit and refill the gear case with the specified marine gear lubricant.
- Test the engine only with an adequate water supply, using the manufacturer's recommended procedure.
Use the applicable Honda service manual for torque values, disassembly sequence and model-specific procedures. Professional installation is recommended if the lower unit has not previously been serviced.
Troubleshooting & FAQ
How do I confirm fitment?
Compare the complete Honda model designation, horsepower, stroke, year or serial range and the original water-pump part number. The listed model families include BF75DK3, BF75DK4, BF90DK4, BF90DK5 and BF100A, but model suffixes and serial ranges may change the correct component.
What are signs of a worn water-pump impeller?
Possible signs include overheating, reduced cooling-water flow, an intermittent or weak telltale stream, or a cracked, hardened or damaged impeller found during inspection.
How often should the impeller be replaced?
Replacement timing depends on operating hours, storage conditions and water quality. Inspect the impeller according to the engine manufacturer's maintenance schedule, and inspect it more frequently after use in saltwater, sand or silt.
Is this a genuine Honda part?
No. This listing is for an aftermarket replacement service kit. The Honda numbers shown are reference numbers used to help verify application.
Does the kit include the water-pump housing?
No. The listed contents are one impeller, one O-ring, one driveshaft key and one water-pump gasket. The housing and other unlisted hardware are not included.
What should I do if the old part looks different?
Do not install the kit. Compare the original component and the complete engine identification with the listed references, then consult the applicable service manual or a qualified marine technician.
Safety & Important Information
- Verify the engine model, serial information and original part number before ordering.
- Do not run an outboard without an adequate water supply.
- Follow the manufacturer's service procedures and torque specifications.
- Stop operation immediately if the engine overheats or cooling-water flow is abnormal.
- This is an aftermarket replacement kit and is not manufactured or endorsed by Honda.
About Sea Sierra
- Marine Replacement Parts — Practical service components for routine outboard maintenance.
- Application-Focused Listings — Reference numbers and model information are provided to support fitment checks.
- Service-Minded Support — Verify the complete engine identification before installation or ordering.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
