Trim & Tilt Switch – Fits Yamaha 50HP 60HP 70HP 150HP 175HP 200HP 225HP 250HP 4-Stroke (Replaces 69J-82563-01, 69J-82563-00, 704-82563-42-00)

Product Details

This Trim & Tilt Switch is designed to fit Yamaha 4-stroke outboard motors ranging from 50HP to 250HP across multiple model years (2015–2022). Compatible with a broad range of Yamaha engine families including the F50LB, T50LB, F60JB, F60LB, T60LB, F70LA, F150JB, F150LB, F150XB, LF150XB, F175LA, F200LB, F200XB, LF200XB, F200XA, LF200XA, VF225LA, F225XA, F250XA, and LF250XA series, this switch ensures reliable trim and tilt control during operation.

This aftermarket replacement directly interchanges with Yamaha OEM part numbers 69J-82563-01, 69J-82563-00, and 704-82563-42-00.

• Direct plug-and-play replacement for OEM switches
• Built for 4-stroke Yamaha outboards from 50HP to 250HP
• Fits multiple engine families and model years 2015–2022

Part Number Matrix

Use this matrix to confirm equivalent references across OEM and aftermarket.

Engine & Model Compatibility

Confirm your engine model/year in the table below.

Technical Specs

OEM Number

69J-82563-01

Replaces Part Numbers

69J-82563-00, 704-82563-42-00

Compatible Engine Type

4-Stroke Outboards

HP Range

50HP – 250HP

Fitment Brand

Yamaha

Application

Trim & Tilt Switch (Electrical Control)

What's in the Box

• 1 × Trim & Tilt Switch

Installation Notes

1. Disconnect the battery and ensure all power is off before beginning work.
2. Locate the existing trim and tilt switch on your throttle or control box.
3. Disconnect the wiring harness from the old switch by pressing any release tabs and pulling gently.
4. Remove any mounting screws or clips securing the old switch in place.
5. Position the new switch into the mounting location and secure it with the original hardware.
6. Reconnect the wiring harness to the new switch, ensuring a firm connection.
7. Reconnect the battery and test the trim and tilt function in both directions (up and down).
8. Verify smooth operation and confirm there are no warning lights or error codes.

Troubleshooting & FAQ

How do I know if this switch fits my Yamaha outboard?

Check the compatibility table above for your exact model, horsepower, and year. You can also verify by comparing the OEM part number on your current switch (69J-82563-01, 69J-82563-00, or 704-82563-42-00) with the numbers listed in this description.

What are the signs of a failing trim and tilt switch?

Common symptoms include the trim/tilt function not responding when you press the switch, intermittent operation, or the motor only moving in one direction. If you hear the relay clicking but no motor movement occurs, the issue may be elsewhere in the system.

Can I install this switch myself?

Yes, installation is straightforward for users with basic mechanical skills and tools. The switch is plug-and-play with the existing wiring harness. However, always disconnect the battery before beginning any electrical work, and consult your service manual if unsure.

Will this work on 2-stroke Yamaha engines?

No, this switch is specifically designed for 4-stroke Yamaha outboards as listed in the compatibility table. Always verify your engine type before purchasing.

Is there any difference in performance between this and the OEM switch?

This aftermarket switch is built to the same functional specifications as the OEM part and uses comparable materials. It provides the same electrical contact and control performance at a more accessible price point.

How often should I replace the trim and tilt switch?

The switch does not have a fixed replacement interval. Replace it when you experience failure symptoms such as non-responsive buttons, corrosion, or physical damage from wear or exposure.

OEM vs. Aftermarket?

This listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.

Shipping speed & cost

We ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.

Warranty & returns

Covered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused & in original condition). See our policy page or reach out for instructions.

Safety & Important Info

• Verify images/specifications against your original part. If anything differs—even if your model appears compatible—do not purchase.
• This is an aftermarket replacement, not an OEM component.
• Professional installation is recommended for safety and performance.

About Sea Sierra

• Pro-Grade Standards — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.
• Fast Global Fulfillment — Free standard delivery to most regions in 5–15 days.
• Manufacturer-Direct Value — Fair pricing without compromising on materials or QC.