Skeg Safe Repair Guard – Fits Mercury/Mariner 75-175 HP Outboard (Replaces GlückMarine 27061)
Skeg Safe Repair Guard – Fits Mercury/Mariner 75-175 HP Outboard (Replaces GlückMarine 27061) is backordered and will ship as soon as it is back in stock.
Worry-free returns
Worry-free returns
Shop with confidence. If you’re not completely satisfied, eligible items may be returned within the return window, provided they are unused and in original packaging.
If the return is due to our error or a defective item, we’ll make it right.
Please contact us before returning any item.
Delivery and Shipping
Delivery and Shipping
Orders are typically processed within 1–2 business days.
U.S. orders usually arrive within 6–15 days, depending on stock location and destination.
International delivery times may vary due to customs processing.
Tracking information will be provided once your order ships.
Skeg Safe Repair Guard – Fits Mercury/Mariner 75-175 HP Outboard (R...
Skeg Safe Repair Guard – Fits Mercury/Mariner 75-175 HP Outboard (Replaces GlückMarine 27061) is backordered and will ship as soon as it is back in stock.
Product Details
This Skeg Safe Repair Guard – Fits Mercury/Mariner 75-175 HP Outboard (Replaces 27061) is engineered to protect the skeg of your outboard motor from rocks and underwater debris. It can also be used to repair an already damaged skeg, restoring performance and appearance. It is designed to fit Mercury/Mariner 75-175 HP, 2-Stroke & 4-Stroke models from 1991–Present.
This part is a direct replacement for GlückMarine 27061 and is comparable to SkegShield and Panther Safe-Skeg models.
- Easy drill-and-bolt installation requires no welding.
- Constructed from tough 316 marine-grade stainless steel for superior corrosion resistance.
- Features a 3mm reinforced lower wear tab and a drain hole to prevent water collection and freezing.
Part Number Matrix
Use this matrix to confirm equivalent references across OEM and aftermarket.
| Brand | Part Number |
|---|---|
| GlückMarine | 27061 |
Engine & Model Compatibility
Confirm your engine model/year in the table below.
This skeg guard is designed for a wide range of Mercury and Mariner outboards.
| Brand | Model | Rated HP | Stroke | Years | Notes |
|---|---|---|---|---|---|
| Mercury/Mariner | Various | 75-175 | 2-Stroke & 4-Stroke | 1991–Present | Fits outboards with appropriate HP range |
Technical Specs
- Product Type
- Skeg Guard/Protector
- Installation
- Drill and bolt-on (no welding required)
- Material
- 316 Marine-Grade Stainless Steel
- Finish
- Polished Stainless Steel
- Features
- 3mm lower wear tab, Drain hole to prevent water collection/freezing
- Weight
- 0.66 kg (1.46 lbs)
- Package Dimensions
- 37 cm × 16.5 cm × 3.4 cm (14.57 in × 6.5 in × 1.34 in)
- Minimum Skeg Remaining
- 5-7.6 cm (2-3 inches)
- Model Number
- 27061
- Warranty
- 30 days
What’s in the Box
- 1 x Skeg Protector
- 4 x Screws
- 2 x Nuts
- 2 x Hex Wrenches
- 1 x Drill Bit
Installation Notes
- Thoroughly clean the surface of the skeg to remove any dirt, grease, or marine growth.
- Slide the skeg guard over the existing skeg to confirm a proper fit. Ensure it sits flush against the skeg.
- With the guard in place, use the pre-drilled holes in the guard as a template to mark the drilling locations on your skeg.
- Remove the guard and carefully drill the marked holes using the provided drill bit.
- Reposition the skeg guard and align the holes. Insert the mounting screws and attach the nuts.
- Tighten the hardware securely and evenly. Do not over-torque.
- Give the skeg guard a final check to ensure it is rigid and firmly attached.
Troubleshooting & FAQ
How much of my original skeg do I need for this guard to fit?
You need a minimum of 2-3 inches (5-7.6 cm) of the original skeg remaining for the guard to be installed securely.
Do I need to weld this skeg guard on?
No, welding is not required. Installation is a straightforward drill-and-bolt process using the included mounting hardware.
How do I know if this will fit my specific engine model?
This guard is designed for most Mercury/Mariner 75-175 HP outboard models manufactured from 1991 to the present. The most important factor is the skeg's shape. We recommend comparing your skeg to the product images to ensure a match.
How can I prevent corrosion between the guard and the skeg?
The skeg guard is made from corrosion-resistant 316 stainless steel. The built-in drain hole also helps by preventing water from getting trapped. As a best practice, always rinse your outboard with fresh water after use in a saltwater environment.
OEM vs. Aftermarket?
This listing is an aftermarket replacement (not OEM). Built to OEM-level specifications with comparable materials. Manufactured in an ISO 9002 facility, batch-inspected for consistency.
Shipping speed & cost?
We ship worldwide quickly—typical transit 5–15 days. Standard shipping is free; expedited options appear at checkout where available.
Warranty & returns?
Covered by a 1-year warranty against manufacturing defects under normal use. If issues arise, contact support with your order details. Returns are accepted within our standard window (unused & in original condition). See our policy page or reach out for instructions.
Safety & Important Info
- Verify images/specifications vs your original part. If anything differs—even if your model appears compatible—do not purchase.
- This is an aftermarket replacement, not an OEM component.
- Professional installation is recommended for safety and performance.
About Sea Sierra
- Pro-Grade Standards — We supply marine parts engineered to OEM-level tolerances and tested for real-world conditions.
- Fast Global Fulfillment — Free standard delivery to most regions in 5–15 days.
- Manufacturer-Direct Value — Fair pricing without compromising on materials or QC.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
